name	kyoko-instrument
description	Wire an AI agent's telemetry into Kyoko and prove one real run shows up.
when_to_use	Use when the user says "set up telemetry", "instrument my agent", "send traces to Kyoko", "Kyoko is empty", "no traces yet", or "make my runs show up in Kyoko." Guides unknown repos by discovering the runtime, making the smallest safe change, and verifying one useful run landed in Kyoko.

You are helping instrument an AI agent so its next meaningful run shows up in Kyoko. Kyoko is a local-first repair loop: the user's agent runs the workflow, a recorder captures the run/spans, and Kyoko ingests that telemetry so it can be inspected, diagnosed, and improved. Kyoko does not run the agent.

Your job is to get one real run into Kyoko with the smallest safe change, verify it actually landed, and only then enrich it. Use Kyoko's documented ingest paths. Do not invent endpoints or SDK calls.

Core Rules

Give visible progress. Say what phase you are in, what you found, and what you are about to edit. One or two sentences per update.
Before editing any file, tell the user the intended change and how risky it is.
Instrument one real agent entry point first. If several are plausible, ask which one should appear in Kyoko.
Get a minimal run in first, then enrich. Do not trace every helper before a basic run lands.
Prefer the offline file path for the first run (see below). It needs no running server, so it is the most reliable way to prove the pipe works.
Verification is required. Success means Kyoko shows a real run, not just that the SDK imported.

Mental Model: How A Run Gets Into Kyoko

A useful Kyoko run shows the input that triggered the agent, the final output or error, the model call, and the real tool executions.

There is one canonical shape and two ways to deliver it:

Record with KyokoRecorder: open a run, open spans for model/tool calls, finish them. This produces a kyoko.source_events.v1 payload.
Deliver that payload one of two ways:
- Offline file (preferred for first run): write it to a JSON file and run kyoko ingest. This writes straight to the SQLite database and needs no running server. It cannot fail because a viewer is down.
- Live HTTP: KyokoClient().ingest(...) POSTs to a running kyoko serve. This is best-effort by default: if the server is not up it warns and drops the telemetry rather than crashing the agent. Use it once kyoko serve is confirmed running and you want runs to appear live.

For non-Python stacks or existing OpenTelemetry setups, Kyoko also accepts OTLP (POST /v1/traces) and ships source-adapter templates and importers. See "Choosing The Path".

Phase 0: Orient

Do a quick read-only pass:

Find the target agent entry point: route, worker, CLI, queue job, agent class.
Identify language/runtime and model/agent SDK.
Identify where tools actually execute and where the run's input/output live.
Check whether Kyoko is installed: kyoko --version. If not, pipx install kyoko (or python3 -m pip install kyoko).
Pick the database path. If the project was bootstrapped it is .kyoko/kyoko.db; otherwise pick one, e.g. /tmp/kyoko.db, and reuse it for both ingest and kyoko serve.

Timebox this. If discovery is not converging, report what you know and ask the smallest concrete question, e.g. "I found app/agent.py and worker.py — which should appear in Kyoko first?"

Phase 1: Get One Real Run In (Offline)

Goal: prove the pipe works with the smallest change, no server required.

For a Python agent, wrap one real entry point:

from kyoko import KyokoRecorder

recorder = KyokoRecorder(
    profile_id="my-agent",      # stable id for this workflow
    profile_name="My Agent",
    root_path=".",
    agent_name="researcher",    # which agent within the workflow
)

with recorder.run("handle request") as run:   # the invocation boundary
    with run.span("llm", kind="model") as span:
        # ... the real model call ...
        span.finish(status="succeeded", output_ref="output://answer")
    run.finish(status="succeeded", summary="Answered the request.")

# Deliver offline — no server needed:
recorder.write_json("kyoko-run.json")

Then ingest the file:

kyoko ingest --db /tmp/kyoko.db kyoko-run.json --json

Run one representative invocation, then verify the run landed:

kyoko runs --db /tmp/kyoko.db --json

You should see the run with the right input/output. If you want to look at it in the dashboard, start the server against the same database:

kyoko serve --db /tmp/kyoko.db   # then open http://127.0.0.1:8765

Phase 1 troubleshooting:

Empty kyoko runs? Confirm the instrumented entry point actually executed and that write_json ran before the process exited.
Ingest error? It is a payload problem, not a missing server — read the error; the recorder output should be a kyoko.source_events.v1 object.
Using KyokoClient().ingest(...) instead and seeing "telemetry not delivered"? The server is not running. Either start kyoko serve on the same DB, or switch to the offline write_json + kyoko ingest path above.
Make sure the same --db path is used for ingest and for kyoko serve. A run ingested into one database will not appear in a server started on another.

Phase 2: Enrich

Once a basic run lands, make it a useful debugging trace:

Open a span for each real model call (kind="model") and tool execution (kind="tool"). Wrap the real tool body, not the decision to call it.
Pass usage, attributes, and output_ref/input_ref where you have them.
On failure, call span.fail(err) / run.fail(err) so the error is captured.
For live visibility while a long run is in flight, you may push live events to POST /v1/live (the TypeScript client exposes ingestLive(...)), but this is optional.

Once runs flow reliably, switch delivery to live HTTP if the user wants runs to appear in the dashboard as the agent runs: start kyoko serve and call KyokoClient().ingest(recorder.to_source_events()) at the end of each run. It is best-effort, so it will not break the agent when the server is down.

Choosing The Path

Python agent, you can edit the loop: KyokoRecorder as above. Default.
TypeScript/Node agent: the @kyoko/sdk package mirrors the Python API (new KyokoRecorder(...), recorder.run(...), new KyokoClient().ingest(...)). Note TS requires explicit run.start() / run.finish(...) (no context manager).
Existing OpenTelemetry / OTLP exporter: point it at Kyoko's OTLP endpoint POST http://127.0.0.1:8765/v1/traces, or ingest exported OTLP JSON with kyoko ingest-otlp --db <db> <file.json>. Do not stand up a second tracer provider.
You cannot edit the agent, but it writes logs/sessions: generate a source adapter (kyoko source-adapter-template <path> --framework <fw> --profile-name <name>) or discover local sources (kyoko discover-sources --db <db> --root-path .). Importers exist for some formats (kyoko import-hermes-kanban, kyoko import-openclaw-sessions).

If no path fits safely, stop and report the entry point and telemetry setup you found rather than guessing.

Just Exploring?

If the user only wants to see what Kyoko looks like with data, skip instrumentation and run the bundled demo:

kyoko demo --db /tmp/kyoko-demo.db --json
kyoko serve --db /tmp/kyoko-demo.db   # open http://127.0.0.1:8765

Verification

Use the strongest available check:

kyoko runs --db <db> --json lists the run you just produced.
kyoko current-run --db <db> --json and kyoko run-outline --db <db> <run-id> --json confirm the spans/structure.
Dashboard: the run appears under Traces at http://127.0.0.1:8765.

Phase 1 success: one real invocation appears with input/output. Phase 2 success: the expected model/tool spans are visible. If a run exists but the content is not useful, verification failed — keep diagnosing or stop with exact evidence.

Handoff

Verified:

Wired. I ran the agent once and confirmed a real run in Kyoko (kyoko runs shows it). Open http://127.0.0.1:8765 to inspect it.

Needs user run:

Wired. Run <command> now; the next run should land in <db>. Check with kyoko runs --db <db> --json, or open the dashboard with kyoko serve --db <db>.

Blocked:

I stopped before guessing. <specific ambiguity/failure>. The next step is <specific user choice>.

name	kyoko-instrument
description	Wire an AI agent's telemetry into Kyoko and prove one real run shows up.
when_to_use	Use when the user says "set up telemetry", "instrument my agent", "send traces to Kyoko", "Kyoko is empty", "no traces yet", or "make my runs show up in Kyoko." Guides unknown repos by discovering the runtime, making the smallest safe change, and verifying one useful run landed in Kyoko.