prepare-a-part-for-3d-printing-in-partmode

# prepare-a-part-for-3d-printing-in-partmode Deliver a mesh artifact with known source, scale, scope, and checksum. Prefer 3MF when the downstream slicer supports it because PartMode writes explicit millimetre units and named bodies; STL does not preserve names or units. ## Boundaries - Verify exact source geometry before tessellation. A successful mesh export does not prove wall thickness, support strategy, orientation, or printability. - Confirm selected bodies and units with the person before export. - Do not overwrite an existing file or silently choose a nearby format. - Use an independent slicer for printer, material, support, and toolpath decisions. ## Procedure 1. Record the source project and configuration, intended bodies, required final dimensions, target format, slicer, printer process, and approved output path. 2. Use `$inspect-and-measure-in-partmode` to confirm valid exact solids, body count, envelope, openings, and required clearances. Resolve model errors first. 3. In **Bodies**, include only the intended export bodies. Check that hidden or construction content is not being mistaken for printable geometry. 4. Choose **Output** → **Export 3MF** when explicit units and named objects are useful, or **Export STL** when required by the downstream workflow. Record that STL scale must be interpreted as millimetres by agreement. 5. Confirm PartMode's export summary and save the artifact to the approved path. Record byte count and compute SHA-256 over the saved bytes. 6. Open the artifact in the independent slicer. Verify units, bounding dimensions, object count, watertightness diagnostics, and intended orientation before choosing material, layer, supports, or toolpath settings. 7. Deliver the mesh with a manifest naming source project, configuration, revision or settled state, selected bodies, units, format, bytes, checksum, slicer verification, and remaining print-process decisions. ## Done - The source PartMode bodies are exact and pass the agreed dimensional checks - The artifact contains only the intended bodies at the correct scale - Saved bytes have a recorded count and independently computed SHA-256 - An independent slicer opens the file and confirms dimensions and object count - The delivery record distinguishes CAD validity from print-process suitability