tuyaos-gpio

name	tuyaos/gpio
description	TuyaOS on-chip GPIO via tkl_gpio: output, input, edge IRQ. GPIO、引脚、电平、中断、tkl_gpio、拉高拉低。
when_to_use	Use for raw digital pins on TuyaOS. For catalogued LED/button product logic, still use tkl_gpio unless the app already has a higher helper.
id	tuyaos-gpio
surfaces	["embedded"]
tags	["gpio","tuyaos","tkl_gpio"]

TuyaOS GPIO (tkl_gpio)

Demo: apps/tuyaos_demo_examples/src/examples/driver_gpio/example_driver_gpio.c

Confirm first

• Output pin / input pin / IRQ pin numbers (TUYA_GPIO_NUM_x) — platform-specific.
• Pull mode and IRQ edge (rise/fall).

Minimal pattern

#include "tuya_cloud_types.h"
# 







  
{
    ()args;
    
}

 
{
    TUYA_GPIO_BASE_CFG_T out_cfg = {
        .mode = TUYA_GPIO_PUSH_PULL,
        .direct = TUYA_GPIO_OUTPUT,
        .level = TUYA_GPIO_LEVEL_LOW,
    };
    tkl_gpio_init(GPIO_OUT_PIN, &out_cfg);
    tkl_gpio_write(GPIO_OUT_PIN, TUYA_GPIO_LEVEL_HIGH);

    TUYA_GPIO_BASE_CFG_T in_cfg = {
        .mode = TUYA_GPIO_PULLUP,
        .direct = TUYA_GPIO_INPUT,
    };
    tkl_gpio_init(GPIO_IN_PIN, &in_cfg);

    TUYA_GPIO_LEVEL_E lvl;
    tkl_gpio_read(GPIO_IN_PIN, &lvl);

    tkl_gpio_init(GPIO_IRQ_PIN, &in_cfg);
    TUYA_GPIO_IRQ_T irq = {
        .mode = TUYA_GPIO_IRQ_FALL,
        .cb = gpio_irq_cb,
        .arg = ,
    };
    tkl_gpio_irq_init(GPIO_IRQ_PIN, &irq);
    tkl_gpio_irq_enable(GPIO_IRQ_PIN);
}