Menú
Create rigid terrain patches, SCM (Bekker-Wong soft-soil) terrain, and CRM (SPH) terrain for wheeled vehicle simulations.
Instalar con Codex o Claude Copia este prompt, pégalo en Codex, Claude u otro asistente, y deja que revise la página de la skill y la instale por ti.
Basado en la clasificación ocupacional SOC
Entry point for FSI-coupled hybrid plans (plan_type=fsi_in_scene) — any scene combining SPH fluid (water tanks, dam-break, wave channels) with multi-body dynamics, optionally with a wheeled vehicle. Pick this over mbs_in_scene whenever the plan involves a fluid domain (scene_objects with domain_type starting "sph_") or an FSI body registration (scene_objects with fsi_registration set). Routes to fsi/sph (always), veh/wheeled_vehicle (when vehicle present), and enforces FSI-specific invariants distinct from generic mbs_in_scene rigid scenes.
Entry point for rigid-body hybrid plans (plan_type=mbs_in_scene) combining a robot or vehicle with scene assets — NO fluid coupling. Routes to the correct domain skills and defines only high-level invariants. Use core/fsi_in_scene instead when the plan involves SPH fluid or FSI body registration.
Entry point for pure multi-body simulation plans (plan_type=mbs). Routes the agent to the correct mechanics, system, and camera skills and defines only high-level invariants.
Entry point for static scene plans (plan_type=scene). Routes the agent to the correct scene, system, and camera skills and defines only high-level invariants.
Set up SPH-based Fluid-Structure Interaction (FSI): create ChFsiFluidSystemSPH and ChFsiSystemSPH, configure fluid and SPH parameters, seed fluid particles with hydrostatic initialization, add container BCE boundary markers, register floating rigid bodies, optionally couple with a wheeled vehicle, and advance with sysFSI.DoStepDynamics(dT).
Translate a `geometry_relations` entry from the plan into correct PyChrono coordinate code. Read this whenever the plan declares a relation_name you have not previously encoded, and especially BEFORE writing SetPos / camera placement for any body that participates in a multi-body geometric constraint. Each subsection below is one canonical pattern named exactly as it appears in `plan.geometry_relations[i].relation_name`.
| name | terrain |
| description | Create rigid terrain patches, SCM (Bekker-Wong soft-soil) terrain, and CRM (SPH) terrain for wheeled vehicle simulations. |
| compatibility | pychrono >= 8.0 |
| metadata | {"domain":"veh"} |
Create the terrain surface under a wheeled vehicle. Three flavors, from cheap to physically rich:
| Flavor | API | Physics | Cost | Use when |
|---|---|---|---|---|
| RigidTerrain | veh.RigidTerrain | Flat / heightmap rigid body, Bullet contacts | Low | Fast demos, paved roads, baseline sanity |
| SCMTerrain | veh.SCMTerrain | Bekker-Wong empirical soft soil, deformable grid | Medium | Off-road ruts, sinkage, deformation without SPH cost |
| CRMTerrain | veh.CRMTerrain | SPH continuum (elastic granular) | High | Splashing particles, large deformation, needs GPU |
When the user asks to simulate a vehicle driving on terrain — required for any wheeled vehicle simulation. Pick the flavor by the user's physics requirement; if unsure, SCM is the recommended default for off-road scenes.
terrain = veh.RigidTerrain(veh_obj.GetSystem())
# NSC material
patch_mat = chrono.ChContactMaterialNSC()
patch_mat.SetFriction(0.9)
patch_mat.SetRestitution(0.01)
# SMC material
patch_mat = chrono.ChContactMaterialSMC()
patch_mat.SetFriction(0.9)
patch_mat.SetRestitution(0.01)
patch_mat.SetYoungModulus(2e7)
# Add patch (flat ground)
patch = terrain.AddPatch(
patch_mat,
chrono.CSYSNORM, # centered at origin, no rotation
terrainLength, # X direction size
terrainWidth # Y direction size
)
# Visual
patch.SetTexture(veh.GetVehicleDataFile("terrain/textures/tile4.jpg"), 200, 200)
patch.SetColor(chrono.ChColor(0.8, 0.8, 0.5))
terrain.Initialize()
| Parameter | Typical Value | Description |
|---|---|---|
| Friction | 0.8 - 0.9 | Friction coefficient |
| Restitution | 0.01 | Bounciness |
| YoungModulus | 2e7 | SMC only - stiffness |
SCMTerrain is a deformable soft-soil model suitable for off-road driving — wheels sink into the surface and leave visible ruts. Cheaper than CRM (no SPH particles) but richer than RigidTerrain.
CRITICAL: The ChSystem MUST have a collision system BEFORE constructing SCMTerrain.
SCMTerrain's constructor checks for an associated collision system and raises RuntimeError if none is found.
If you are creating the system yourself (not via a vehicle wrapper):
sys.SetCollisionSystemType(chrono.ChCollisionSystem.Type_BULLET)
# MUST be called BEFORE constructing SCMTerrain
If using a vehicle wrapper (hmmwv.Initialize() etc.), the vehicle sets up the collision system automatically — no extra call needed. But never call SetCollisionSystemType() AFTER hmmwv.Initialize() (see Pitfalls below).
terrain = veh.SCMTerrain(system) # takes the vehicle's ChSystem
Signature: SetSoilParameters(Bekker_Kphi, Bekker_Kc, Bekker_n, Mohr_cohesion, Mohr_friction, Janosi_shear, elastic_K, damping_R)
terrain.SetSoilParameters(
2e6, # Bekker_Kphi — frictional modulus (Pa)
0, # Bekker_Kc — cohesive modulus
1.1, # Bekker_n — exponent (1.0 soft → 1.5 hard)
0, # Mohr_cohesion — cohesive limit (Pa)
30, # Mohr_friction — friction angle (deg)
0.01, # Janosi_shear — shear coefficient (m)
2e8, # elastic_K — elastic stiffness (Pa/m)
3e4, # damping_R — vertical damping (Pa·s/m)
)
Exactly 8 positional args are required — no keyword form. Do not omit damping_R (8th arg) and do not add a 9th.
SCM does a ray-cast per grid vertex per step. A 120×120 m patch at 5 cm resolution is ~6 million vertices and will grind the sim. Attach an active domain so only cells near the vehicle are updated.
CRITICAL: Attach active domain to the CHASSIS body, NOT to wheel spindles.
SCM's UpdateActiveDomain() projects the OOBB using the reference body's orientation (SCMTerrain.cpp:957-1001). Wheel spindles rotate at hundreds of RPM — the OOBB rotates with them, causing the projected terrain range to become empty at many rotation angles. Result: rays=0, zero deformation, no ruts.
# CORRECT — chassis body stays level, stable OOBB projection
terrain.AddActiveDomain(
hmmwv.GetChassisBody(),
chrono.ChVector3d(0, 0, 0), # local centre offset
chrono.ChVector3d(5, 3, 1), # half-extents (m)
)
# WRONG — spindle rotates, OOBB becomes degenerate → rays=0
for axle in hmmwv.GetVehicle().GetAxles():
terrain.AddActiveDomain(
axle.m_wheels[0].GetSpindle(), # DO NOT USE
chrono.ChVector3d(0, 0, 0),
chrono.ChVector3d(1.5, 1.0, 1.5),
)
terrain.Initialize(120.0, 120.0, 0.1)
# length (m), width (m), grid resolution (m).
# 0.1 m grid is a good balance for performance with visible ruts.
# 0.05 m gives finer ruts but 4× more vertices and ray-cast cost.
terrain.SetMeshWireframe(False)
terrain.SetTexture(
chrono.GetChronoDataFile("vehicle/terrain/textures/dirt.jpg"),
80, 80, # UV tiling
)
SCM detects tire contact via ChCollisionSystem::RayHit() — it casts rays from each grid vertex and looks for collision shapes. Rigid tires add their own collision geometry automatically. TMEASY / PAC02 / FIALA tires do NOT — you must add explicit collision cylinders to each spindle.
tire_rad = hmmwv.GetVehicle().GetAxles()[0].m_wheels[0].GetTire().GetRadius()
tire_w = hmmwv.GetVehicle().GetAxles()[0].m_wheels[0].GetTire().GetWidth()
tire_mat = chrono.ChContactMaterialSMC()
tire_mat.SetFriction(0.9)
tire_mat.SetRestitution(0.1)
TIRE_FAMILY = 1
SUPPORT_FAMILY = 4
for axle in hmmwv.GetVehicle().GetAxles():
for iw in range(2):
spindle = axle.m_wheels[iw].GetSpindle()
spindle.AddCollisionShape(
chrono.ChCollisionShapeCylinder(tire_mat, tire_rad + 0.04, tire_w),
chrono.ChFramed(chrono.VNULL, chrono.QuatFromAngleX(math.pi / 2)),
)
spindle.EnableCollision(True)
sp_cm = spindle.GetCollisionModel()
sp_cm.SetFamily(TIRE_FAMILY)
sp_cm.DisallowCollisionsWith(TIRE_FAMILY)
sp_cm.DisallowCollisionsWith(SUPPORT_FAMILY)
# MANDATORY: rebuild all collision models after post-init shape changes
system.GetCollisionSystem().BindAll()
Three critical rules for tire collision cylinders:
Rule 1 — Use tire_rad + 0.04 not tire_rad. The extra 4 cm ensures the collision cylinder extends slightly below the terrain surface at the TMEASY equilibrium spindle height, guaranteeing SCM detects sinkage.
Rule 2 — NEVER call DisallowCollisionsWith(0) (family 0). Bullet's RayHit() queries use family 0 by default. If you disallow family 0 on the tire cylinder, SCM's ray-casts are filtered out → hits=0 → no ruts form. Chassis-tire non-collision should be handled on the chassis side (via add_collision_via_subbodies(tire_family=TIRE_FAMILY)), not on the tire side.
Rule 3 — Call collsys.BindAll() after adding shapes. The per-model Remove()/BindItem() path does NOT work — BindItem() checks HasImplementation() and silently skips models that are already bound. BindAll() forces Bullet to rebuild all collision models, making the new cylinders visible to ray-casts.
SCM is a depth-based deformable surface, not a general rigid ground. Dynamic props (rocks, cottage) placed on the terrain will free-fall through z=0. Add a hidden rigid support plane:
support_mat = make_contact_material(
friction=0.9, restitution=0.01, method="SMC", young_modulus=2e7,
)
support = chrono.ChBodyEasyBox(120.0, 120.0, 0.2, 1000, False, True, support_mat)
support.SetName("asset_support_ground")
support.SetPos(chrono.ChVector3d(0, 0, -0.1)) # top at z=0 (SCM rest plane)
support.SetFixed(True)
support.EnableCollision(True)
support_cm = support.GetCollisionModel()
support_cm.SetFamily(SUPPORT_FAMILY)
support_cm.DisallowCollisionsWith(TIRE_FAMILY) # tires ride on SCM, not support
support_cm.DisallowCollisionsWith(CHASSIS_FAMILY) # chassis rides on SCM
support_cm.DisallowCollisionsWith(3) # chassis sub-body family
system.AddBody(support)
Not available in VSG — VSG shows geometric deformation directly. Do not call SetPlotType; it is an Irrlicht-only API and is not supported.
terrain.Initialize(heightmap_path, scm_size, scm_size,
-pool_depth, 0.0, scm_resolution)
# heightmap: 16-bit PNG, white=max height, black=min height
# min_z, max_z: height range mapping
SCM uses the standard terrain synchronize/advance pattern:
terrain.Synchronize(time)
terrain.Advance(step_size)
# Pass terrain into vehicle.Synchronize so the wheels sample it
hmmwv.Synchronize(time, driver_inputs, terrain)
| Symptom | Cause | Fix |
|---|---|---|
Chassis doesn't translate at any throttle, GetSpeed() oscillates around 0 | TireModelType_RIGID (the HMMWV_Full default) on SCM — no slip/grip curve, wheels break loose under engine torque | SetTireType(TireModelType_TMEASY) + SetTireStepSize(step) + add spindle cylinders (next row). Do not try to rescue with stiffer soil / higher cohesion — the failure is structural. See veh/wheeled_vehicle/SKILL.md "Picking a tire type by terrain". |
rays=0 | Active domain on rotating spindle | Use chassis body for AddActiveDomain |
hits=0 (rays > 0) | DisallowCollisionsWith(0) on tire | Remove that call; handle on chassis side |
hits=0 (rays > 0) | Missing BindAll() after shape changes | Call collsys.BindAll() after adding tire cylinders |
patches=0 (hits > 0) | Collision cylinder too small | Use tire_rad + 0.04 not tire_rad |
| No ruts with TMEASY | No tire collision cylinders | Add explicit ChCollisionShapeCylinder to each spindle |
| Want "colored" C++-style ruts (sinkage heatmap) | SetPlotType is Irrlicht-only, silently a no-op in VSG | VSG only shows geometric mesh deformation. Accept it, or port to Irrlicht vis (big rewrite). Do not call SetPlotType under VSG. |
| Props fall through z=0 | No rigid support plane | Add hidden ChBodyEasyBox at z=-0.1 |
Do NOT call SetCollisionSystemType() after hmmwv.Initialize() | Creates new collision system, leaves dangling impl pointers on all HMMWV bodies — BindAll() skips them | Trust the collision system HMMWV already created; only call BindAll() on it |
For realistic wheel-soil interaction with deformable terrain:
from pychrono.fsi import (
ChFsiFluidSystemSPH, ChFsiSystemSPH,
ElasticMaterialProperties, SPHParameters,
IntegrationScheme_RK2, ViscosityMethod_ARTIFICIAL_BILATERAL,
BoundaryMethod_ADAMI, OutputLevel_STATE
)
# Create CRM terrain
initial_spacing = 0.03
terrain = veh.CRMTerrain(system, initial_spacing)
# Configure FSI system
sysFSI = terrain.GetFsiSystemSPH()
sysSPH = terrain.GetFluidSystemSPH()
sysSPH.EnableCudaErrorCheck(False)
terrain.SetVerbose(verbose)
terrain.SetGravitationalAcceleration(chrono.ChVector3d(0, 0, -9.81))
terrain.SetStepSizeCFD(step_size)
# Elastic material properties
mat_props = ElasticMaterialProperties()
mat_props.density = 1700
mat_props.Young_modulus = 1e6
mat_props.Poisson_ratio = 0.3
mat_props.mu_I0 = 0.04
mat_props.mu_fric_s = 0.7
mat_props.mu_fric_2 = 0.7
mat_props.average_diam = 0.005
mat_props.cohesion_coeff = 5e3
terrain.SetElasticSPH(mat_props)
# SPH parameters
sph_params = SPHParameters()
sph_params.integration_scheme = IntegrationScheme_RK2
sph_params.initial_spacing = initial_spacing
sph_params.free_surface_threshold = 0.8
sph_params.artificial_viscosity = 0.5
sph_params.viscosity_method = ViscosityMethod_ARTIFICIAL_BILATERAL
sph_params.boundary_method = BoundaryMethod_ADAMI
sph_params.use_variable_time_step = True
terrain.SetSPHParameters(sph_params)
terrain.SetOutputLevel(OutputLevel_STATE)
terrain.Initialize()
terrain.Construct(
chrono.ChVector3d(length, width, 0.25), # dimensions
chrono.ChVector3d(length / 2, 0, 0), # center
BoxSide_ALL & ~BoxSide_Z_POS # all boundaries except top
)
terrain.Construct(
veh.GetVehicleDataFile("terrain/height_maps/bump64.bmp"), # image file
terrain_length,
terrain_width,
chrono.ChVector2d(0.25, 0.55), # height range [min, max]
0.25, # depth
True, # uniform depth
chrono.ChVector3d(terrain_length / 2, 0, 0), # center
BoxSide_Z_NEG # bottom wall
)
terrain.Synchronize(time)
terrain.Advance(step_size)
# In vehicle sync, pass terrain as argument
veh_obj.Synchronize(time, driver_inputs, terrain)
aabb = terrain.GetSPHBoundingBox()
num_sph = terrain.GetNumSPHParticles()
num_bce = terrain.GetNumBoundaryBCEMarkers()
print(f"SPH particles: {num_sph}")
print(f"AABB: {aabb.min} to {aabb.max}")
For vehicle setup and system creation:
../../mbs/system_create/ — ChSystem creation../../mbs/collision/ — Contact materials../wheeled_vehicle/ — Vehicle creation../driver/ — Driver systemsallowed_classes:
allowed_methods:
allowed_constants:
allowed_utils: