lint-and-fix

name	lint-and-fix
description	Run make format and make lint, then fix linter violations. Use when formatting code or fixing trunk/lint issues.
compatibility	Requires trunk (make format, make lint).

Lint-and-Fix

Purpose

An autonomous loop to format the codebase, run linters, and fix any remaining violations until the project passes format and lint checks.

Loop Logic

1. Format: Run make format (trunk fmt).
2. Identify: Run make lint to list current failures.
3. Analyze: Read the linter output and the affected code.
4. Fix: Apply the minimum necessary change to resolve each issue.
5. Verify: Re-run make format and make lint.
   • If both pass: Done.
   • If failures remain: Repeat from step 2 (or move to the next issue).

Termination Criteria

• No failures from make lint after fixes.
• Optional: Cap iterations (e.g. 5) to avoid unbounded loops.

Reference

Format and lint commands are defined in the project Makefile: make format runs trunk fmt -a; make lint runs trunk check -a -y.