sar-adc-skill

name

sar-adc-skill

description

Use this skill for SAR ADC system design and all its key building blocks. Covers: SAR ADC architecture, CDAC operation and switching schemes, sync/async SAR logic, top-plate vs bottom-plate sampling, noise and ENOB budgeting, redundancy, PVT, metastability, peripheral design, and Verilog-A modeling. Also covers the core analog submodules needed for a complete SAR ADC: StrongArm dynamic comparator (topology, noise, offset, sizing), bootstrapped sampling switch (circuit operation, Ron flatness, sizing), and LDO regulator for clean ADC supply (topology, PSRR, compensation, sizing). Includes the SAR_11B_ZZS taped-out 11-bit reference design (TSMC 28nm HPC+). Also covers Spectre simulation setup, ENOB/SNDR measurement with ADCToolbox, and a phased verification flow (behavioral → hybrid → full transistor-level). Use for any question about SAR ADC design from specs to first-order block decisions, submodule sizing guidance, simulation/verification, or reference design lookup.

SAR ADC Skill

This skill is a compact engineering guide built from the raw_materials/ course set.

Use it for:

• Explaining SAR ADC operation from system level to block level.
• Turning target specs into first-order design budgets.
• Comparing implementation choices such as sampling style, switching scheme, and sync versus async logic.
• Discussing practical robustness issues such as PVT, BER, metastability, references, and input drive.
• Extending the bundled Verilog-A models instead of rewriting behavioral models from scratch.

Read Order

Use only the minimum reference needed for the user task:

• references/core-architecture.md Use for SAR operation, residue intuition, CDAC-centered architecture, comparator role, and the practical meaning of sync versus async timing.

• references/design-and-tradeoffs.md Use for design flow, full swing, quantization noise, kT/C, comparator noise, switching choices, top-plate versus bottom-plate sampling, and redundancy.

• references/robustness-and-system.md Use for PVT, Monte Carlo interpretation, metastability, BER, reference strategy, input path, supply design, and shippable-product concerns.

• references/comparator.md Use for StrongArm dynamic comparator topology, four operating phases, transistor sizing, noise (probit method, σ formula), offset sources, speed/power/noise trade-offs, and FOM.

• references/bootstrap_switch.md Use for bootstrapped sampling switch topology, gate voltage derivation, transistor roles, sizing rules (CB ≥ 5×Cgg), Ron flatness, clock feedthrough, and comparison to plain NMOS/CMOS switch.

• references/ldo.md Use for LDO supply design in SAR ADC context: PMOS-pass topology, Miller compensation, sizing from specs, loop gain/PSRR/noise formulas, and compensation trade-offs.

• references/sar-logic.md Use for SAR logic implementation: full conversion timing, sync vs async state machine, async latch chain (L5_LATCH_CELL transistor roles, NOR3/NAND2 control logic, ENB chain), complementary pass-gate DAC switch polarity convention, DFF output latching, and Verilog-A behavioral model correspondence. Based on the taped-out SAR_11B_ZZS (TSMC 28nm HPC+).

• references/sar-adc-11b-zzs.md Use for the taped-out 11-bit fully differential SAR ADC reference design: TSMC 28nm HPC+, 0.9V, bootstrap switch, CDAC unit cap 200 aF, StrongArm comparator, async logic. Module reference table and quick sizing lookup.

• references/simulation-and-verification.md Use for SAR ADC Spectre simulation setup: coherent sampling, input signal conventions, sync vs async clocking, strobe resampling, ENOB/SNDR/SFDR extraction with ADCToolbox, debugging common failures (comparator polarity, bus ordering, charge injection, sampling alignment), differential vs single-ended CDAC tradeoffs, and the phased verification flow.

Default Workflow

For design questions, follow this order:

1. Clarify the target: resolution, sample rate, input-frequency range, SNDR or ENOB target, power, supply, reference range, and whether the question is educational or tape-out oriented.
2. Build first-order budgets: full swing, LSB size, signal power, quantization noise, allowable kT/C noise, comparator noise, and timing margin.
3. Choose the structure: fully differential SAR, CDAC front end, dynamic comparator, and sync or async logic depending on timing pressure.
4. Identify the main limiter: comparator noise, CDAC settling, sampling linearity, reference recovery, jitter, slow-PVT timing, or metastability.
5. Only then move to circuit-level advice.

Verilog-A Assets

The skill already includes baseline models in assets/va/:

• L2_cdac_4b_ideal.va
• L2_comparator_ideal.va
• L2_logic_4b_sync.va
• L3_logic_4b_async.va
• _va_dac_4b.va
• _va_dac_4b_se.va
• sar_4b_se_ideal.va

Use these as starting points for behavioral verification and system integration.

Scope

What This Skill Can Do

• Help design a SAR ADC from system-level targets down to first-order block-level decisions.
• Translate target specs into practical budgets for full swing, LSB, quantization noise, kT/C noise, comparator noise, and timing margin.
• Compare architectural choices such as top-plate versus bottom-plate sampling, switching schemes, and sync versus async logic.
• Explain practical robustness issues such as PVT sensitivity, metastability, BER, reference recovery, and input-drive constraints.
• Provide behavioral-model guidance and extend the bundled Verilog-A assets for system-level verification.

What This Skill Cannot Do By Itself

• It does not replace transistor-level circuit design in a specific PDK.
• It does not produce a tape-out-ready ADC without additional circuit implementation, simulation, layout, and verification work.
• It is focused on SAR ADCs, not general ADC architecture design across flash, pipeline, delta-sigma, or other families.
• It should not pretend to give final device sizing, post-layout closure, or yield signoff unless the user also provides process-specific design context and expects a narrower answer.
• For transistor-level device sizing in a specific PDK, consult the spectre or virtuoso skills alongside the submodule references in this skill.

Expected Design Depth

• Default depth should be system level plus first-order circuit planning.
• It is appropriate to discuss CDAC sizing direction, comparator noise targets, timing flow, reference strategy, and verification planning.
• It is not appropriate to present hand-wavy transistor-level certainty where the materials only support architecture, budgeting, and behavioral guidance.

Response Style

• Speak like a mixed-signal IC design engineer.
• Prefer quantified tradeoffs over generic advice.
• Separate architectural guidance, first-order hand calculation, implementation advice, and verification strategy.
• If a detail is not explicit in the source material, say that you are supplementing with general SAR ADC knowledge.