Exécutez n'importe quel Skill dans Manus
en un clic

Exécutez n'importe quel Skill dans Manus en un clic

swpilotcli-plot-ic-bisectors-at-68

Étoiles23

Forks2

Mis à jour30 avril 2026 à 03:46

Draw the two perpendicular bisectors and IC intersection for the validated 68 to 68.01 mm example. Reads precise source geometry from 草圖1 and draws the bisectors into 草圖5. Use when explaining how the 68 mm IC is constructed geometrically.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

arthurle3210

arthurle3210/SwpilotCLI

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Développeurs de logicielsProfessions informatiques et mathématiques·SOC 15-1252

Explorateur de fichiers

4 fichiers

SKILL.md

readonly

name	swpilotcli-plot-ic-bisectors-at-68
description	Draw the two perpendicular bisectors and IC intersection for the validated 68 to 68.01 mm example. Reads precise source geometry from 草圖1 and draws the bisectors into 草圖5. Use when explaining how the 68 mm IC is constructed geometrically.

swpilotcli-plot-ic-bisectors-at-68

Draw the perpendicular bisector construction used to obtain the IC at 68 mm.

Quick start

dotnet run --project ./sup_tools/swpilotcli-plot-ic-bisectors-at-68/scripts/PlotIcBisectorsAt68/PlotIcBisectorsAt68.csproj

Plus depuis ce dépôt

même dépôt

swpilotcli-active-doc-info

arthurle3210/SwpilotCLI

Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.

2026-04-3023

swpilotcli-eye-screenshot

arthurle3210/SwpilotCLI

YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.

2026-04-3023

swpilotcli-actiongroup-replace-notes

arthurle3210/SwpilotCLI

"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.

2026-04-3023

swpilotcli-batch-xt-to-step

arthurle3210/SwpilotCLI

Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.

2026-04-3023

swpilotcli-check-dangling-dims

arthurle3210/SwpilotCLI

Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

2026-04-3023

swpilotcli-close-doc

arthurle3210/SwpilotCLI

Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.

2026-04-3023