Exécutez n'importe quel Skill dans Manus
en un clic

Exécutez n'importe quel Skill dans Manus en un clic

notify-wecom

Étoiles1 277

Forks211

Mis à jour9 juillet 2026 à 21:45

Send a single one-off message to a WeCom (Enterprise WeChat) group bot. Use this skill whenever the user says "/notify-wecom", "send a quick WeCom message", "企微通知一下", "临时发一条企业微信", or any one-shot notification that does not need a reusable template or setup workflow. The message is sent immediately; no confirmation prompt is shown unless the message is empty or the webhook is not configured.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

daymade

daymade/claude-code-skills

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Développeurs de logicielsProfessions informatiques et mathématiques·SOC 15-1252

Explorateur de fichiers

2 fichiers

SKILL.md

readonly

name	notify-wecom
description	Send a single one-off message to a WeCom (Enterprise WeChat) group bot. Use this skill whenever the user says "/notify-wecom", "send a quick WeCom message", "企微通知一下", "临时发一条企业微信", or any one-shot notification that does not need a reusable template or setup workflow. The message is sent immediately; no confirmation prompt is shown unless the message is empty or the webhook is not configured.
argument-hint	[message]

/notify-wecom

Send a single message to a WeCom group bot.

Usage

/notify-wecom Claude Code 备份完成 ✅

The skill reads the webhook URL from the shared config file:

~/.config/setup-notifications-via-wecom/config.json

If the config is missing, it prints the one-line setup command and stops.

Prerequisite

This skill is a lightweight companion to setup-notifications-via-wecom. Either:

Install setup-notifications-via-wecom first (recommended — it provides the webhook setup steps and its bundled sender), or
Create the config file manually as shown below.

What It Does

Reads ~/.config/setup-notifications-via-wecom/config.json for webhook_url.
Unsets all local proxy env vars (Tencent endpoints must be reached directly).
Sends the message via the WeCom webhook using the sender from setup-notifications-via-wecom (or an equivalent inline curl call).
Reports success or the exact WeCom error.

Examples

/notify-wecom 服务上线成功 🚀
/notify-wecom 告警：build 失败，请检查
/notify-wecom 今日同步完成，0 缺失 0 滞后

Multi-line Messages

For multi-line messages, wrap in triple quotes or use a file:

/notify-wecom "第一行
第二行
第三行"

Failure Modes

Config missing: Run the setup step from setup-notifications-via-wecom, or create the config file manually.
Webhook key invalid: WeCom returns an errcode; the skill prints it.
Proxy still interfering: If you have proxy vars set outside the standard names, unset them first.

Limitations

Plain text only. No markdown cards, images, or @mentions.
Message length limit is 4096 bytes (UTF-8).
No templating — use setup-notifications-via-wecom for structured backup/alert/status messages.

Plus depuis ce dépôt

même dépôt

frontend-visual-qa

daymade/claude-code-skills

Audits already-rendered web, landing-page, HTML deck/slide, browser tool/game, dashboard/admin, design-system, and desktop UIs using real-browser or native-app journeys, inspected screenshots, DOM geometry, responsive or projection viewports, and a bundled Playwright sweep. Use after UI implementation to find typography, wrapping, overlap, overflow, responsive, route, overlay, map, transient-state, data-visualization, browser-output, file-dialog, PDF/print, or Electron-shell defects, or to compare a rendered artifact with a visual reference. Do not use for greenfield UI design, extracting a design system from screenshots, general QA-program setup, or nonvisual code debugging.

2026-07-171.3k

openclaw-model-switch

daymade/claude-code-skills

Switch or repair the model configuration of an OpenClaw instance (e.g. Kimi k2p6 → k3): change the default model, add model definitions, and fix model-config failures — 401 "Invalid token", "No available channel / model not found", thinking-level rejections ("Thinking level X is not supported"), and config edits that don't take effect. Use whenever the user wants to switch/upgrade/rollback the OpenClaw model (切换模型/换模型/ 升级模型), or says the OpenClaw/龙虾 bot's model is misconfigured (模型配的错了), or the bot falls back / errors on LLM calls.

2026-07-171.3k

claude-switch-models-setup

daymade/claude-code-skills

Set up multiple isolated Claude Code CLI profiles so students and power users can run different LLM providers (Kimi K3, Kimi K2.7 highspeed, GLM, DeepSeek, StepFun, Anthropic) in separate terminal windows at the same time. Use this skill whenever the user asks about multi-provider Claude setup, multiple Claude Code windows, switching models, CLAUDE_CONFIG_DIR, post-class profile installation, or running Kimi/GLM/DeepSeek/StepFun alongside Anthropic in Claude Code.

2026-07-161.3k

skill-creator

daymade/claude-code-skills

Create new skills, modify and improve existing skills, and measure skill performance. This daymade edition supersedes the official skill-creator plugin — when both appear in the skill list, always use this one. Use when users want to create a skill from scratch, edit, or optimize an existing skill, run evals to test a skill, benchmark skill performance with variance analysis, or optimize a skill's description for better triggering accuracy. Also use for its three specialized distillations, even when the user never says "skill" — "wrap this session up as a skill" / "把这次 session 做成一个 skill" (wrapper skill for a third-party tool), "mine my chat history for patterns" / "把这次对话沉淀到 skill 里" (conversation mining), and "these are my approved examples, learn what I really want" / "从我认可的样例里提炼我真正的喜好" (artifact-corpus preference distillation).

2026-07-161.3k

transcript-fixer

daymade/claude-code-skills

Corrects speech-to-text transcription errors using dictionary rules and AI-powered analysis. Builds personalized correction databases that learn from each fix, auto-loads person-name ASR variants from your people roster, and reads per-domain context files that prime the AI pass for context-dependent homophones. Triggers when working with ASR/STT output containing recognition errors, homophones, garbled technical terms, person-name errors, or Chinese/English mixed content. Also triggers on requests to clean up meeting notes, lecture transcripts, interview recordings, or any text produced by speech recognition. Use this skill even when the user just says "fix this transcript", "clean up these meeting notes", or mentions garbled names without invoking ASR specifically.

2026-07-161.3k

git-safety-net

daymade/claude-code-skills

Prevent and recover from local-Git disasters — commits stranded on the wrong or unpushed branch, orphaned/dropped stashes, dangling commits about to be garbage-collected, work that seems lost after heavy branch/stash/rebase juggling or parallel-agent work, and "is everything actually merged?" uncertainty. Use whenever the user fears they lost code, asks to recover a deleted commit / branch / stash, wonders what is still unmerged, needs to prove nothing was dropped after rebasing or deleting branches, resolves a version/lockfile collision between two branches, or wants habits so a branch mess never loses work again. Triggers on "did I lose work", "recover lost commit", "restore deleted branch", "stash disappeared", "is everything merged", "what's not merged", "git reflog", "dangling commits", "分支灾难", "误删分支/commit", "stash 丢了", "确认全部合并了". This is LOCAL-Git safety and forensics — distinct from GitHub PR/API operations (github-ops) and routine repo setup/sync (auto-repo-setup).

2026-07-161.3k

name	notify-wecom
description	Send a single one-off message to a WeCom (Enterprise WeChat) group bot. Use this skill whenever the user says "/notify-wecom", "send a quick WeCom message", "企微通知一下", "临时发一条企业微信", or any one-shot notification that does not need a reusable template or setup workflow. The message is sent immediately; no confirmation prompt is shown unless the message is empty or the webhook is not configured.
argument-hint	[message]

/notify-wecom

Send a single message to a WeCom group bot.

Usage

/notify-wecom Claude Code 备份完成 ✅

The skill reads the webhook URL from the shared config file:

~/.config/setup-notifications-via-wecom/config.json

If the config is missing, it prints the one-line setup command and stops.

Prerequisite

This skill is a lightweight companion to setup-notifications-via-wecom. Either:

Install setup-notifications-via-wecom first (recommended — it provides the webhook setup steps and its bundled sender), or
Create the config file manually as shown below.

What It Does

Reads ~/.config/setup-notifications-via-wecom/config.json for webhook_url.
Unsets all local proxy env vars (Tencent endpoints must be reached directly).
Sends the message via the WeCom webhook using the sender from setup-notifications-via-wecom (or an equivalent inline curl call).
Reports success or the exact WeCom error.

Examples

/notify-wecom 服务上线成功 🚀
/notify-wecom 告警：build 失败，请检查
/notify-wecom 今日同步完成，0 缺失 0 滞后

Multi-line Messages

For multi-line messages, wrap in triple quotes or use a file:

/notify-wecom "第一行
第二行
第三行"

Failure Modes

Config missing: Run the setup step from setup-notifications-via-wecom, or create the config file manually.
Webhook key invalid: WeCom returns an errcode; the skill prints it.
Proxy still interfering: If you have proxy vars set outside the standard names, unset them first.

Limitations

Plain text only. No markdown cards, images, or @mentions.
Message length limit is 4096 bytes (UTF-8).
No templating — use setup-notifications-via-wecom for structured backup/alert/status messages.