v-implementing

name	v-implementing
description	Parallel DAG-plan implementation skill. Reads a v-planning plan directory (root.md + step-<n>.md files), topologically schedules ready steps, and fans them out as parallel sub-agents. Use whenever the user invokes /v-implement, points at a plan directory produced by /v-plan, or asks to "run the parallel plan", "implement the DAG", or "fan out the steps" — even without those exact words. For linear plans (single .md file), use `implementing` instead.
hooks	{"PostToolUse":[{"matcher":"Edit|Write","hooks":"[Truncated]"}],"Stop":[{"hooks":"[Truncated]"}]}

v-implementing

You are implementing an approved DAG-structured plan produced by v-planning. The plan is a directory with root.md + one step-<n>.md per node. Your job is to act as a topological scheduler: at each tick, find steps whose dependencies are all done, fan them out as parallel sub-agents (one per ready step), wait, repeat — until the DAG is drained. Then run Global Verification.

This is the parallel sibling of implementing. The orchestration model is the same (sub-agents do the work, main session coordinates), only the scheduler is different.

Working Agreement

All user-facing questions go through AskUserQuestion — see desplega:ask-user for conventions. Never ask in chat as plain bullets.

All read/research/validation work goes through sub-agents — keep raw tool output out of the main session. Default to run_in_background: true. The fan-out scheduler below is built on this.

The autonomy mode (below) controls how often you check in. AskUserQuestion is always the mechanism.

File-review is on by default — when significant changes land in a step (or wave), invoke /file-review:file-review <path> for inline feedback (skip only if Autopilot).

Autonomy Mode

Mode	Behavior
Autopilot	Drain the DAG without pausing. Only stop on blocker / failed step.
Critical (Default)	Pause when each wave of parallel steps completes; wait for manual verification before unlocking the next wave.
Verbose	Pause after each individual step (even within a wave).

Initial Setup Questions

After understanding the plan and before the scheduler loop starts, gather implementation-specific details (skip in Autopilot):

1. Branch / Worktree Setup

Check the current branch: git branch --show-current. Then check if the wts plugin is installed (look for wts:wts in available skills).

If wts is installed, use AskUserQuestion:

Question	Options
"You're on <current-branch>. Where would you like to implement?"	1. Continue on current branch, 2. Create a new branch, 3. Create a wts worktree

If wts is not installed, drop the worktree option.

2. Commit Strategy

Use AskUserQuestion:

Question	Options
"How would you like to handle commits during parallel implementation?"	1. Commit after each step completes (Recommended), 2. Commit at the end (single commit), 3. Let me decide as I go

If "Commit after each step" is selected, after a step's manual verification passes, create a commit: [step-N] <step name>.

3. Orchestration Mode (only if the Workflow tool is available)

Question	Options
"Run the DAG waves as Workflow scripts? (deterministic scheduling, parallel steps as agent() calls)"	1. Yes — Workflow waves, 2. No — Agent fan-out (Default)

A "yes" is the explicit opt-in the Workflow tool requires. If opted in, each wave of the scheduler loop below runs as one Workflow script — a parallel() of agent() calls, one per ready step, with model/effort per desplega:delegate-work. Everything else is unchanged: step agents still follow the step-running contract (atomic frontmatter claim, three-bucket verification), and autonomy-mode pause points sit between Workflow invocations, never inside one. In Autopilot these questions are skipped, so there is no opt-in — use Agent fan-out unless the user pre-authorized workflows.

4. Code Review Mode

Question	Options
"Run an automatic code review after each wave?"	1. Automatic two-axis review per wave (Recommended), 2. Only at the end (single review after the DAG drains), 3. Off — I'll review myself

In Autopilot, skip the question and default to automatic per-wave review.

Getting Started

Given a plan directory path:

1. Read root.md fully (no limit/offset). Capture: Overview, Current State, Desired End State, Implementation Approach, Global Verification.
2. Read every step-<n>.md's frontmatter to build the dependency graph (id, depends_on). You don't need to read step bodies up front — the sub-agents will do that.
3. Validate the DAG:
   • No cycles
   • Every depends_on ID exists as a step file
   • At least one step has depends_on: [] (otherwise nothing can start)
4. Set root.md frontmatter status: in-progress.
5. Build a TodoWrite list with one entry per step, marked pending.
6. Resume support: if any step's body has - [x] boxes already (or its frontmatter says status: completed if the user added it), trust them and treat that step as done.

If no path given, ask via AskUserQuestion.

The Scheduler Loop

The scheduler reads each step's frontmatter status (ready | claimed | done) and depends_on. The frontmatter status field is the single source of truth — multiple orchestrator instances on the same plan dir coordinate through it (each desplega:step-running sub-agent atomically claims its step before doing work).

while any step has status != done:
    ready = [step for step in steps
             if step.status == "ready"
             and all(dep.status == "done" for dep in step.depends_on)]
    if not ready:
        # DAG drained, OR every remaining undone step is claimed by another worker
        if any step has status == claimed: wait for in-flight claims to resolve
        else: report stuck (likely cycle or unrecoverable failure)
        continue
    fan out each step in `ready` as a parallel `desplega:step-running` sub-agent
    wait for the wave to complete
    review reports; step-running has already updated frontmatter
        (status: done on success, status: ready on retry-able failure, status: claimed if held for investigation)
    if Critical mode: pause for manual verification of newly-completed steps
    if any failed: stop and ask user how to proceed

Spawning a Step Sub-agent

Use the Agent tool with run_in_background: true, invoking desplega:step-running. Pass:

• Step path: full path to step-<n>.md
• Plan dir: full path to the parent plan directory
• Agent ID: unique ID for this sub-agent (e.g. orchestrator session ID + step ID + timestamp). step-running uses this for atomic claim + stale-claim detection.
• Plan-level context (optional): a quick brief from root.md. step-running re-reads root.md itself, so this is just to reduce round-trips.

step-running owns:

• Atomic claim (rewrite frontmatter status: ready → status: claimed, assignee: <agent-id>, claimed_at: <ts>)
• Three-bucket verification (Automated Verification, Automated QA, QA Doc identification)
• Terminal status transition (status: done on success, status: ready on retry-able failure)
• Reporting back

The orchestrator does NOT do step work itself — it delegates. See desplega:step-running for the full sub-agent contract.

Executor routing: if the desplega:delegate-work skill is available, pick each step's executor per its routing matrix instead of defaulting to a step-running sub-agent — a step may route to a Codex variant (one worktree per parallel slice) or a specific Claude model tier. Only the executor choice changes; the scheduler, frontmatter claim protocol, and all other semantics here stay unchanged. When a step routes to Codex, the orchestrator owns the frontmatter bookkeeping that step-running would normally do (Codex must not edit plan files).

Wave Completion

When a wave finishes:

1. Review each agent's report. Mark steps done only if completed was reported.
2. Run the wave code review (unless review mode is Off) — invoke desplega:code-reviewing on the wave's combined diff: Standards + Spec axes as parallel background sub-agents (routed per desplega:delegate-work), spec source = the completed steps' bodies and Success Criteria. Critical findings block those steps' commits — fix and re-verify first. If "Only at the end" was selected, run one review over the full diff after the DAG drains instead.
3. Handle QA Doc: <path> — for each step that reported a QA doc, invoke desplega:qa against that path. The Automated QA bucket inside the step is already handled by the sub-agent; only the linked doc needs separate orchestration here. (QA: n/a → proceed normally.)
4. Manual verification (if not Autopilot) — present manual verification items from each completed step's body. Wait for user confirmation. Don't tick manual boxes until confirmed.
5. Commits (if commit-per-step was selected) — after a step's manual verification passes, create a commit: [step-N] <step name>.
6. Loop — recompute ready and start the next wave.

Handling Failures and Mismatches

If a sub-agent reports failed or blocked, or you spot a mismatch between plan and reality:

Question	Options
"[step-N] [issue]. How should I proceed?"	1. Adapt step (edit step-N.md and retry), 2. Retry as-is, 3. Skip and continue (mark step blocked), 4. Stop the run

In Autopilot mode, use best judgment, document the decision in the step file, and continue if non-fatal.

After the DAG Drains

When every step is done:

1. Run Global Verification from root.md. Tick automated checks; surface manual checks to the user.
2. Set root.md frontmatter status: completed.
3. Offer post-implementation auditing: "Would you like me to run /verify-plan and /review on the plan directory?"
4. If commit-per-step was off, offer to create a single bundled commit now.
5. If the work ships as a GitHub PR: once review comments land, address them with desplega:tackle-gh-comments (fetch threads, verify each claim, fix, reply, resolve — push last).

Important Guidelines

1. One step = one sub-agent. Don't bundle steps into a single agent even if they're in the same wave — fan-out is the whole point.
2. Plan-level context goes to every sub-agent. Sibling step bodies do not.
3. The DAG is canonical via step frontmatter — if root.md's table is out of sync, trust the frontmatter.
4. Resume works step-granular. If the user re-runs /v-implement mid-DAG, completed steps stay completed; only undone ones rerun.
5. Don't tick manual checkboxes until the user confirms — automated boxes can be ticked by the sub-agent or the orchestrator.

Review Integration

If file-review is available and the user opted in:

• After each step's significant code changes, invoke /file-review:file-review <changed-file>.
• Process feedback with file-review:process-review before treating the step as done.
• Skip in Autopilot.