| name | freertos-plus-tcp-integration |
| description | Use when integrating, porting, configuring, or debugging FreeRTOS+TCP networking, network interface drivers, buffer management, DHCP, sockets, or embedded TCP/IP issues |
FreeRTOS+TCP Integration
Overview
Use this skill to integrate FreeRTOS+TCP by proving the network interface driver, buffer management, IP task, and socket behavior separately. Most failures come from driver callbacks, buffer ownership, or task priority/stack sizing.
When To Use
Use this skill when:
- The user wants FreeRTOS+TCP on an MCU.
- The issue involves network interface porting, DHCP, ARP, sockets, buffer descriptors, IP task, DNS, or TCP/UDP stalls.
- The project uses FreeRTOS tasks and FreeRTOS+TCP APIs instead of lwIP.
Do not use this skill for lwIP projects. Use lwip-integration instead.
First Questions
Ask for:
- MCU/SoC, PHY/module, MAC driver, FreeRTOS version, and FreeRTOS+TCP version.
- Network interface source and buffer allocation scheme.
- Static IP/DHCP config, MAC address, gateway, DNS, and hostname.
- IP task priority/stack, driver task/ISR model, and heap size.
- Current symptom and network logs/counters.
Integration Checklist
-
Prove link and MAC.
Confirm PHY link, MAC address, RX/TX interrupts, and descriptor rings.
-
Configure buffer management.
Choose and size network buffers intentionally; track leaks and ownership.
-
Verify IP task health.
IP task stack, priority, event queue, and timer behavior must be stable.
-
Test layers.
Link, ARP, ping, UDP, TCP connect, DNS, DHCP, and reconnect separately.
-
Check thread rules.
Use FreeRTOS+TCP APIs from valid task contexts and avoid unsafe ISR use.
Common Failures
- Network buffers leak after RX error paths.
- IP task stack is too small.
- MAC DMA cache maintenance is missing.
- DHCP fails because link state is not reported correctly.
- Socket timeouts are treated as fatal connection state.
Verification
Before claiming FreeRTOS+TCP works:
- State driver, buffer scheme, IP config, IP task priority/stack, and heap.
- Confirm link, IP address, ping, UDP/TCP test, and reconnect behavior.
- Report buffer usage/leak evidence if available.
- Confirm cache/DMA handling when relevant.
Example
User:
FreeRTOS+TCP DHCP 成功但 TCP 连接会卡死。
Agent:
- Asks for socket code, IP task stack, buffer scheme, driver logs, and heap stats.
- Checks buffer ownership and IP task health before protocol logic.
- Verifies UDP and TCP separately.
