| name | erigon-implement-eip |
| description | Implement a new EIP for a hardfork under development in Erigon. Use when the user asks to implement, port, or wire up an EIP — covers spec lookup, dep analysis, prior-work check, implementation, lint, tests, and a wrap-up saved to `agentspecs/`. |
| argument-hint | <fork> <eip-number> [devnet] |
| allowed-tools | Bash, Read, Write, Edit, Glob, Grep, WebFetch, Skill |
Implement EIP-$1 in the $0 fork
Step 1 — Locate and understand the EIP specification
Fetch the specification from:
https://eips.ethereum.org/EIPS/eip-$1
Read the spec end-to-end and make sure you understand it. If there are any ambiguities or things that do not make sense in the EIP, bring these up and ask for clarifications. Once understood, map the EIP to the codebase — identify which packages, files, and existing constructs the EIP will touch.
Step 2 — Find dependent and referenced EIPs
Identify any other EIPs that EIP-$1 depends on or references. Each such EIP can be fetched using the same URL pattern as in Step 1, substituting its number:
https://eips.ethereum.org/EIPS/eip-<number>
Try to understand these additional EIPs and map them to the code. If there are any ambiguities or contradictions with the new EIP, make sure to raise these and ask questions.
Step 3 — Identify the hardforks of referenced / interplaying EIPs
Identify which hardforks contain the referenced EIPs, as well as any other EIPs already in the codebase that interplay with the new one. This provides more context and knowledge when analysing the code.
A list of forks and the EIPs they contain can be found at:
https://eips.ethereum.org/meta
They are organised as "meta EIPs" and usually start with Hardfork Meta followed by the name of the hardfork.
Fork naming
More recent forks use portmanteau naming to combine the execution-layer (EL) fork name and the consensus-layer (CL) fork name. EL forks are named after cities; CL forks are named after stars. For example, Glamsterdam is a portmanteau of Gloas (CL) and Amsterdam (EL).
EL vs CL scope
Some EIPs only affect the EL, others only the CL, and some affect both. Erigon has both an EL implementation (under the execution package) and a CL implementation (under the cl package), so all EIPs apply to one or both layers in Erigon.
Reading a meta EIP
In some cases fork meta EIPs list which EIPs got included; in other cases they provide a summary of the changes instead of an EIP list.
The meta EIP for the current fork under development usually has these lists:
- CFI — EIPs Considered For Inclusion
- SFI — EIPs Scheduled For Inclusion
- PFI — EIPs Proposed For Inclusion
- DFI — EIPs Declined For Inclusion
Step 4 — Locate the latest devnet specification
If a devnet name was provided as the third argument ($2), fetch its specification from:
https://notes.ethereum.org/@ethpandaops/$2
What devnets are
Devnets are short-lived test networks where changes for a hardfork under development are validated. Core developers iterate through a series of devnets, progressively adding EIPs and refining their specs, until all hardfork changes are ready for release.
What the devnet spec contains
A devnet spec typically lists:
- All EIPs being tested in that devnet
- What is new or changed compared to the previous devnet (e.g. newly added EIPs, revised EIP behaviour, client-config tweaks)
Use the spec to pinpoint which changes for EIP-$1 are in scope for this devnet and how they differ from prior devnet iterations. This is especially valuable when an earlier version of the EIP was already implemented for a previous devnet — the delta between devnets tells you exactly what needs updating (and ties directly into Step 6 below).
When this step does not apply
The devnet argument is optional. If none was provided, skip this step — this is expected when an EIP is being implemented before any devnet spec exists for it.
Step 5 — Reference the Ethereum Yellow Paper
Reference the Ethereum Yellow Paper for deeper information about the Ethereum protocol. It can be found at:
https://ethereum.github.io/yellowpaper/paper.pdf
Note however that the current version of it covers up to and including the Shanghai hard fork. Changes to the protocol after Shanghai can be inferred via the meta EIPs for the subsequent forks after Shanghai.
The yellow paper provides deep base knowledge that can be used to confirm correctness up to Shanghai, and later for parts that haven't been changed by subsequent hard forks. For parts that have been changed in subsequent hard forks, the corresponding EIP specs from those hardforks — read in chronological order — become the main source of truth.
Step 6 — Check for previous work on this EIP
Check whether any previous work for this EIP has already been done in the codebase. This may happen if we've previously implemented this EIP but against an older / outdated spec for a previous devnet.
In this case, analyse the current code and compare it to the latest specs. Implement the necessary changes to address any discrepancies that you find.
Step 7 — Implement the change
Implement the EIP changes in the code, based on the understanding gathered in Steps 1–6 and the codebase mapping you produced. Touch the packages, files, and existing constructs identified during that mapping.
If during implementation you discover something that is unclear or appears to contradict the spec, stop and ask for clarification rather than guessing.
After making code changes, run make lint and fix any reported issues. The linter is non-deterministic — run it repeatedly until it is clean.
Step 8 — Run local tests
Run local tests using the /erigon-test-all skill. Analyse and fix any failures in the implementation (see also "Question the tests — do not silently fix them" below). Keep iterating until all tests are fixed.
Which EL tests matter most
The most important tests when implementing a new EIP for the EL are the EEST spec test shards, exercised by the cmd/evm runners (statetest, blocktest, enginextest) via the Makefile targets:
make eest-spec-statetests-{stable,devnet}-{sequential,parallel} — state tests against the stable/devnet EEST fixtures in both commitment modes.make eest-spec-blocktests-{stable,devnet}-{sequential,parallel} — blockchain tests against the stable/devnet EEST fixtures in both commitment modes.make eest-spec-enginextests-{stable,devnet}-{sequential,parallel} — engine-x tests against the stable/devnet EEST fixtures in both commitment modes.make eest-spec-enginextests-benchmark-{1m,5m,10m,30m,60m,100m,150m}-{sequential,parallel} — engine-x tests against the per-gas-target benchmark fixtures, with --time per-test stats and both commitment modes.make eest-spec-blocktests-stable-race-{pre-cancun,cancun,prague,osaka}-{sequential,parallel} and make eest-spec-blocktests-devnet-race-amsterdam-{sequential,parallel} — race-detector variants split by fork and commitment mode.
The shard list, failure budgets, and commitment-parallel flags are defined in tools/eest-spec-shards.yml (single source of truth shared with the CI workflow and the local runner script). Execution remains parallel in every paired shard. See EEST_SPEC_SHARDS / EEST_SPEC_RACE_SHARDS in the root Makefile for the partition into non-race vs race targets.
Pitfall: stale evm / evm.race binary. When iterating on an EIP implementation, always invoke shards via make eest-spec-<shard> rather than bash tools/run-eest-spec-test.sh <shard> — the make target lists evm (or evm.race) as a prereq and go build is cache-aware, so a fresh binary is built before each run. The script invoked directly bypasses that rebuild, so the runners exercise whatever build/bin/evm{,.race} happens to be on disk against current fixtures — silently inflating failures (e.g. devnet shards "regressing" by thousands of tests) or hiding regressions when comparing budgets before/after a change.
For an EIP on a hardfork under development, the -devnet shards are the primary signal; the -stable shards (and -benchmark-* shards, where applicable) are regression checks against prior hardforks.
Where the test fixtures come from
These protocol tests are defined by JSON test fixture files inside release tarballs (eest_stable.tar.gz, eest_devnet.tar.gz, eest_benchmark.tar.gz) pinned by test-fixtures.json and lazy-downloaded + extracted by make test-fixtures-eest (which the eest-spec-* Makefile targets depend on) into test-fixtures-cache/<key>/. The cmd/evm runners walk the extracted JSON files directly.
These test fixture files are generated by the Ethereum Python spec reference implementation, which can be found at:
https://github.com/ethereum/execution-specs
The code version which generates the test fixtures for a given hard fork lives on a branch following the forks/<fork_name> naming convention. For example, if the fork name is osaka then the branch name will be forks/osaka. The branch for the user-provided hard fork under development is forks/$0.
Sometimes new EIPs under development may not be in the forks/$0 branch yet — they may be on a separate feature branch. To find it, look for a branch name that contains the provided EIP number $1. Once you find a branch (or several branches), ask the user to confirm which one to use.
The point of identifying the correct branch is to read and analyse the right reference code — i.e. the version of the Python spec implementation that corresponds to the fixtures we are testing against. Nothing in the local repo needs to be updated; this is purely about which code version the agent downloads / reads for cross-referencing while debugging or validating behaviour.
Question the tests — do not silently fix them
It is VERY IMPORTANT to question the tests and validate they are doing the correct thing as per the EIP specifications. This applies to both EL spec tests (driven by the tarballs pinned in test-fixtures.json) and CL spec tests (driven by cl/spectest — see "Running CL spec tests" below).
Sometimes some of the protocol spec tests may have bugs or mistakes in them due to inaccurate implementation in the upstream reference implementations (the Python execution-specs for the EL, the consensus-spec-tests for the CL).
Or some of our other local tests (outside of the ones driven by the EEST tarballs pinned in test-fixtures.json, the execution/tests/legacy-tests submodule, or the cl/spectest fixtures) may have gaps in them, test for the wrong thing, or test for logic from before the new EIP — in which case the test should be amended to be explicitly for the correct corresponding previous hardfork, and a new test should be written for the new hardfork which this EIP will go into, covering both the old logic (prior to this EIP) and the new logic (after it).
When you run into such situations do not attempt to fix those tests. Instead write a summary of your findings and ask for them to be reviewed and new guidance to be given.
Running CL spec tests
If the EIP affects the CL (or has any CL-side touchpoints), also run the consensus-spec tests under cl/spectest. These mirror what the Consensus spec GitHub workflow (.github/workflows/test-integration-caplin.yml) runs.
The flow is:
cd cl/spectest
make tests # downloads the consensus-spec-tests fixture tarball (via tools/test-fixtures.sh) and unpacks it
make mainnet # runs the full mainnet CL spec test suite
For faster iteration when only one fork is relevant, the cl/spectest/Makefile exposes per-fork targets such as make capella, make deneb, make electra, make fulu, etc. Use the one matching the fork the EIP belongs to. If no per-fork target exists yet for the new fork, add one or run CGO_CFLAGS=-D__BLST_PORTABLE__ go test -run=/mainnet/<fork>/ -v --timeout 30m from cl/spectest (the CGO_CFLAGS flag mirrors the Makefile and is required for the BLS portable build).
If make tests fails (e.g. fixture download issue), the CI workflow treats it as a soft skip — but locally you should investigate and fix it before relying on the CL test results.
Step 9 — Wrap up
Once implementation is complete and tests are passing, produce a wrap-up summary of all the work done. The summary should cover:
- The EIP being implemented and the fork it targets
- All packages, files, and constructs that were touched
- Key design decisions and any deviations from the spec (with justification)
- Dependent / referenced EIPs that influenced the implementation
- Any outstanding questions, unresolved ambiguities, or test discrepancies that were flagged for review
- Test coverage status — which
eest-spec-* shards now pass (and CL cl/spectest results, if applicable), and any that were skipped or remain open
Include the summary in your final reply, and also save it as a markdown file at:
agentspecs/eip-$1-implementation/summary.md
Create the agentspecs/eip-$1-implementation/ directory if it does not already exist. The agentspecs/ directory is gitignored, so these notes stay local.
