tikz

name	tikz
description	Use when labels overlap arrows in a TikZ figure, text sits on boxes, or arrows cross each other. Audits and fixes residual TikZ visual collisions in any .tex file using mathematical gap calculations and Bézier depth formulas — no eyeballing. Downstream repair tool; the upstream defense is generating TikZ safely via /beamer-deck and tikz_rules.md.
allowed-tools	Bash(pdflatex*), Bash(latexmk*), Bash(grep*), Bash(ls*), Read, Edit, Glob
argument-hint	[path/to/file.tex]

TikZ Collision Audit

Purpose: Find and fix residual visual collisions in TikZ figures in a given .tex file. Labels on arrows, text inside boxes, arrows crossing arrows — this skill catches them using measurement, not intuition.

The fundamental rule: Claude cannot reliably eyeball where TikZ elements land. All placement must be verified mathematically before declaring it safe.

---

Critical context: this is a repair tool, not the primary defense

/tikz runs after TikZ has been generated. It audits existing code and fixes what it finds. But it cannot reliably fix diagrams that were never built with measurement in mind.

The upstream defense is writing TikZ safely from the start:

1. Every \node declares explicit minimum width and minimum height
2. Every edge label carries a directional keyword (above, below, etc.)
3. A coordinate map comment block precedes every tikzpicture
4. Standard diagram types use canonical safe templates
5. scale is never used on complex diagrams

When new decks are authored via /beamer-deck, prefer applying these rules during generation. /tikz is the downstream cleanup pass for anything that slipped through or for legacy/hand-written TikZ.

When upstream rules were applied: /tikz should find few or no issues. Run it as a check.

When upstream rules were NOT applied (legacy TikZ, hand-written diagrams, inherited decks): /tikz does its best, but expect more findings, more iteration, and lower reliability on autosized nodes and scaled diagrams.

The companion reference tikz_rules.md (in this skill's directory) contains the full formulas and worked examples — read it once before running the audit passes below.

---

Step 1: Identify the file and run the pre-check

If the user specified a file, use it. If not, ask. Then:

grep -n "tikzpicture\|begin{frame}\|node\|draw\|bend\|foreach" [file].tex | head -100

Get a sense of scope: how many TikZ diagrams, how many frames, how many arrows.

Pre-check: were the generation rules followed?

Before running the six audit passes, quickly assess whether the TikZ was written safely:

# Check for autosized nodes (no minimum width/height)
grep -n "\\\\node" [file].tex | grep -v "minimum"

# Check for scale on tikzpicture
grep -n "scale=" [file].tex

# Check for coordinate map comments
grep -n "% Coordinate map\|% Node map\|% Layout" [file].tex

If autosized nodes are widespread: warn that repair reliability will be lower. The fix is upstream — add explicit dimensions to every node. Consider doing that first before running the audit passes.

If scale is used on a complex diagram: warn that coordinates are compressed but text is not. Gap calculations in Passes 2–5 must compensate for the scale factor, but this compensation is fragile. The better fix is upstream: redesign at intended size.

If no coordinate map exists: the audit will take longer because spatial relationships must be reverse-engineered from the code rather than read from a plan.

---

Step 2: For each TikZ diagram, run all 6 Passes in order

Full rules and formulas are in tikz_rules.md alongside this SKILL. Read it if you haven't. What follows is the operational checklist — the reference file has the formulas and worked examples.

---

Pass 0: Cross-slide consistency

grep -n "node.*{" [file].tex | grep -v "^[[:space:]]*%"

If the same diagram appears on multiple slides: colors, positions, and font sizes must be identical across all instances. Only the deliberate change (a new highlight, a new node) should differ.

---

Pass 1: Bézier curves — do this FIRST

grep -n "bend" [file].tex

For each curved arrow found, compute:

chord_length = distance between the two endpoints
max_depth    = (chord_length / 2) × tan(bend_angle / 2)
safe_zone    = max_depth + 0.5cm

Quick reference:

Bend	tan(angle/2)
20°	0.176
25°	0.222
30°	0.268
35°	0.315
40°	0.364
45°	0.414

Check 1: Is any label within safe_zone of the baseline, in the direction the curve bends? If yes → move the label.

Check 2: Does the curve cross any other arrow in the same figure? Curves bending down cross vertical arrows. Fix: reverse the bend direction.

---

Pass 2: Label-between-nodes gap calculation

For every arrow label placed between two nodes:

Available gap  = center-to-center distance − half-width(A) − half-width(B)
Usable space   = Available gap − 0.6cm   [0.3cm padding each side]

Estimate label width using character counts:

Font	Width/char
\scriptsize	0.10 cm
\footnotesize	0.12 cm
\small	0.15 cm
\normalsize	0.18 cm
Bold	+10%

Known limitation: these estimates break down for math mode ($\beta$ is wider than 1 character), \textbf content, multi-word labels, and anything non-ASCII. When in doubt, overestimate width by 20%.

If scale is in effect: multiply the usable space by the scale factor, but leave the label width estimate at native size. This is the core of the scale problem — coordinates shrink, text does not.

If estimated label width > usable space: guaranteed collision. Fix: move above/below, or shorten text, or increase node spacing.

The most common fix for labels that exceed the gap: break the label out as a standalone \node positioned above the arrow midpoint — clear of both boxes — rather than as an inline edge label.

---

Pass 3: Arrow label positioning keywords

grep -n "node\[" [file].tex | grep -v "above\|below\|left\|right\|anchor\|pos\|midway\|near"

Every arrow label must carry a directional keyword. Any node[...] on an arrow without above, below, left, right, anchor=, pos=, or midway will sit ON the arrow line. Fix: add the keyword.

---

Pass 4: Labels vs. drawn shapes (Boundary Rule)

For every \node, \fill, \draw circle/rectangle: compute the boundary. Any text within 0.4cm of a shape edge is a collision.

Circles: center (cx, cy), radius r → boundary from cy − r to cy + r Rectangles/boxes: bottom-left (x,y), width w, height h → top edge at y + h

If a label coordinate puts it inside or touching a shape boundary — move it 0.4cm outside.

Note on scale: scale=0.8 shrinks coordinates but NOT text. A 2 cm gap becomes 1.6 cm, but a \small label stays \small. Recalculate all gaps accounting for scale. If the diagram uses scale on a complex figure, flag this to the user as an upstream problem — the reliable fix is to redesign at intended size, not to compensate in the audit.

---

Pass 5: Margin check

Minimum clearances:

Pair	Minimum
Label ↔ label	0.3 cm
Label ↔ axis line	0.3 cm
Label ↔ arrow	0.3 cm
Arrow origin ↔ box edge	0.15 cm
Label ↔ shape boundary	0.4 cm
Any object ↔ slide edge	0.5 cm

Also check:

• Multi-line nodes have align=center or align=left?
• No node text clipped by the slide margin?
• If scale is used: did text get unintentionally large relative to shrunken coordinates?

---

Pass 6: Debug bounding-box verification

Do NOT attempt to visually inspect the PDF by "eyeballing." Claude cannot reliably see TikZ collisions in rendered PDFs. Instead, use a debug bounding-box approach:

1. Temporarily add red debug outlines around every node to make bounding boxes structurally visible:

% DEBUG — add to preamble temporarily, remove before shipping
\tikzset{every node/.append style={draw=red, very thin}}

2. Compile and inspect: with red outlines, overlapping bounding boxes are visible as overlapping red rectangles. This makes collisions structurally obvious rather than visually estimated.

3. For each red-box overlap found: go back to the source, fix the coordinates or dimensions, remove the debug line, and recompile.

4. Remove the debug line before declaring the audit complete. The debug outlines are a diagnostic tool, not a permanent addition.

This replaces the older instruction to "open the PDF and visually confirm." The debug-outline method catches the same problems but does not depend on Claude's unreliable ability to interpret rendered PDF geometry.

---

Step 3: Fix, recompile, repeat

After making fixes, prefer latexmk (the user's default):

latexmk -pdf -interaction=nonstopmode [file].tex 2>&1 | grep -E "Overfull|Underfull|Error|Warning"

or pdflatex if latexmk isn't set up for the file:

pdflatex -interaction=nonstopmode [file].tex 2>&1 | grep -E "Overfull|Underfull|Error|Warning"

Must return zero lines of Error. Fix any new Overfull/Underfull warnings introduced by the repositioning. Repeat until clean.

---

Step 4: Re-audit the ENTIRE file after any fix

One collision fix often reveals a second one nearby, or introduces a new label that now crowds a different object. After every change, re-run Passes 1–5 on all TikZ figures in the file — not just the one you just touched.

grep -c "tikzpicture" [file].tex

That count is how many diagrams need a clean bill of health.

---

Known limitations

These are the cases where /tikz is least reliable. When you encounter them, the better fix is almost always upstream (rewrite the TikZ safely) rather than downstream (try to repair it).

Limitation	Why it's hard	Upstream fix
Autosized nodes (no minimum width/minimum height)	Rendered dimensions depend on text content and font — /tikz can only estimate, not compute exactly	Add explicit dimensions
scale on complex diagrams	Coordinates shrink but text does not; gap calculations require fragile compensation	Redesign at intended size
Math-mode label widths	$\hat{\beta}_{it}$ is wider than character-count × width/char suggests	Overestimate by 20–30% or measure with a test compile
Nested tikzpicture environments	Coordinate systems interact unpredictably	Flatten into a single environment
\foreach loops generating many nodes	Gap calculations must be done per-iteration; easy to miss one	Write explicit nodes for small counts; check loop bounds for large counts

---

Common collision patterns and fast fixes

Pattern	Symptom	Fix
Label between wide boxes	Text bleeds into box edge	Move label above arrow as standalone \node
Step 1 / Step 2 labels on flow diagrams	Labels overlap box text	Place labels above the arrow band, not as edge labels
Diagonal arrow label at below right	Label lands inside another box	Use pos=0.55 + compute landing position
Return curve crossing vertical arrow	Arrows intersect visually	Reverse bend direction (bend left ↔ bend right)
Scale mismatch	Text large, gaps small	Redesign at intended size; do not use scale on complex diagrams
Slope label on regression line	Label sits on the line	Use node[anchor=west] at a point 0.3cm off the line end
\\ inside \textcolor{}	Hbox overflow	Break into two separate \textcolor calls on separate lines
Curve labels at right endpoints colliding with brace annotations	Labels horizontally adjacent at similar y	Move curve labels to different x position, or use a legend in the text column instead

---

Acknowledgments

Ported from Scott Cunningham's MixtapeTools skill library (resources/academics/scott-cunningham/MixtapeTools/.claude/skills/tikz/). The companion tikz_rules.md is adapted from MixtapeTools/.claude/skills/compiledeck/tikz_rules.md. Upstream-defense references have been rewritten to point at /beamer-deck and the user's unified user-beamer template.