migrate

name	migrate
description	Adopt govctl in an existing project. Discovers undocumented decisions, backfills ADRs/RFCs, annotates source code. Use when: (1) Project has no governance yet, (2) User mentions migrate, adopt, onboard, or brownfield
allowed-tools	Read, Write, Edit, Bash, Glob, Grep, TodoWrite
argument-hint	[optional scope hint, e.g. "focus on database decisions"]

/migrate — Adopt govctl in an Existing Project

Migrate an existing codebase to govctl governance per [[ADR-0032]].

Purpose: Systematically discover undocumented decisions and specifications in an existing project, codify them as govctl artifacts, and annotate source code with cross-references.

Outputs: Discovery report, backfilled governance artifacts, annotated source references, and an initial governed baseline.

Properties:

• Interactive — Confirms discoveries with the user before creating artifacts
• Incremental — Each phase can be run independently; partial migration is valid
• Non-destructive — Never overwrites existing files; only adds governance artifacts

Critical Rules

1. This is a historical backfill workflow, not an implementation workflow.
2. Do not create work items during discovery or backfill phases unless you are establishing baseline tracking for already in-progress work.
3. Ask permission before lifecycle-owned verbs used in migration: govctl adr accept, govctl rfc finalize, and govctl rfc advance.
4. Never edit governed files directly. Use govctl verbs only.
5. Use /commit to record migration milestones. Do not embed raw VCS procedures in this workflow.
6. If migration uncovers unresolved design questions for future work, hand them off to /discuss rather than inventing rationale.

---

QUICK REFERENCE

# Scaffold
govctl init                               # Initialize governance structure
govctl status                             # Verify setup

# Backfill ADRs
govctl adr new "<decision title>"
govctl adr set <ADR-ID> context --stdin <<'EOF' ... EOF
govctl adr add <ADR-ID> alternatives "Chosen option: ..." --pro "..." --con "..."
govctl adr tick <ADR-ID> alternatives --at 0 -s accepted
govctl adr add <ADR-ID> alternatives "Rejected option: ..." --pro "..." --con "..." --reject-reason "Why this was not chosen"
govctl adr tick <ADR-ID> alternatives --at 1 -s rejected
govctl adr set <ADR-ID> decision --stdin <<'EOF' ... EOF
govctl adr set <ADR-ID> consequences --stdin <<'EOF' ... EOF
govctl adr accept <ADR-ID>

# Backfill RFCs (optional)
govctl rfc new "<spec title>"
govctl clause new <RFC-ID>:C-<NAME> "<title>" -s "Specification" -k normative
govctl clause edit <RFC-ID>:C-<NAME> text --stdin <<'EOF' ... EOF
govctl rfc finalize <RFC-ID> normative
govctl rfc advance <RFC-ID> impl
govctl rfc advance <RFC-ID> test
govctl rfc advance <RFC-ID> stable

# Validate
govctl check

---

PHASE 0: SCAFFOLD

0.1 Initialize govctl

govctl init

This creates the gov/ directory structure alongside existing project files. It is safe to run in an existing repo — it does not overwrite existing files.

0.2 Verify Setup

govctl status

Confirm the governance structure was created. Read gov/config.toml and adjust if needed (e.g., source_scan.include patterns for the project's language).

0.3 Detect VCS

If migration milestones should be recorded, /commit will choose the raw VCS workflow.

0.4 Initial Commit

If the user wants to record scaffold creation, use /commit with chore(gov): initialize govctl governance structure.

---

PHASE 1: DISCOVER

Systematically scan the project to find implicit governance artifacts. Do not create any govctl artifacts yet — this phase is purely discovery.

1.1 Read Project Overview

Read these files (if they exist) to understand the project:

• README.md — Project purpose, tech stack, architecture overview
• CONTRIBUTING.md — Development conventions and processes
• ARCHITECTURE.md or docs/architecture.md — System design
• CHANGELOG.md — History of changes and decisions
• Makefile, Justfile, package.json, Cargo.toml — Build system and dependencies

1.2 Discover Architectural Decisions

Scan for implicit decisions in:

Source	What to look for
README/docs	"We chose X because...", "This project uses..."
Config files	Framework choices, database configs, deployment targets
Dependencies	Major library choices (ORM, web framework, test framework)
Directory structure	Architectural patterns (monorepo, microservices, MVC, hexagonal)
Code comments	"TODO: migrate to...", "HACK: because X doesn't support...", "We use X instead of Y"
Git/jj history	Large refactors, technology migrations, design pivots

For each discovered decision, note:

• What was decided
• Why (if discernible from context)
• What alternatives existed (if known)
• Where in the code this decision is implemented

1.3 Discover Existing Specifications

Look for documents that function as specifications:

• API contracts (OpenAPI specs, GraphQL schemas, protobuf definitions)
• Design docs or RFCs in markdown
• Interface definitions or type contracts
• Formal requirements documents

1.4 Discover In-Progress Work

Check for:

• Open issues in the repo (if accessible)
• TODO/FIXME/HACK comments in code
• Feature branches
• Draft PRs

1.5 Present Discovery Report

Present findings to the user before proceeding. Format:

=== MIGRATION DISCOVERY REPORT ===

Architectural Decisions Found: N
  1. [Brief description] — source: [where found]
  2. ...

Existing Specifications Found: N
  1. [Brief description] — source: [file path]
  2. ...

In-Progress Work Found: N
  1. [Brief description] — source: [where found]
  2. ...

Recommended migration scope:
  - ADRs to create: [list]
  - RFCs to create: [list or "none"]
  - Work items to create: [list or "none"]

Ask the user: Which items should be backfilled? The user may choose to skip some or prioritize others. Respect their choices.

---

PHASE 2: BACKFILL ADRs

For each decision the user confirmed, create an ADR.

2.1 Create ADR

Follow the adr-writer skill for quality guidelines.

govctl adr new "<decision title>"

2.2 Populate Context and Consequences

govctl adr set <ADR-ID> context --stdin <<'EOF'
[Problem statement and what prompted the decision]
EOF

govctl adr set <ADR-ID> consequences --stdin <<'EOF'
### Positive
- [Observed benefits]

### Negative
- [Observed downsides or trade-offs]

### Neutral
- [Side effects]
EOF

2.3 Add Alternatives (if known)

govctl adr add <ADR-ID> alternatives "Chosen: <what was adopted>" \
  --pro "..." --con "..."
govctl adr add <ADR-ID> alternatives "Rejected: <what was not chosen>" \
  --pro "..." --con "..." --reject-reason "..."
govctl adr tick <ADR-ID> alternatives --at 0 -s accepted
govctl adr tick <ADR-ID> alternatives --at 1 -s rejected

Preserve the normal ADR discussion order during backfill when possible:

1. Record the alternatives that are still recoverable
2. Mark the chosen option accepted
3. Mark non-chosen options rejected with reasons when known
4. Only then write or finalize the decision prose

If non-selected alternatives are not recoverable, it is acceptable to omit alternatives entirely and say so explicitly in the ADR context. Historical backfills may not be able to reconstruct rejected options, and reviewers should evaluate them with that limitation in mind.

2.4 Write the Decision Last

govctl adr set <ADR-ID> decision --stdin <<'EOF'
We will [what was decided].

[Rationale — why this was chosen]
EOF

Treat decision as the conclusion of the reconstructed alternatives discussion, not as the starting point.

2.5 Review Backfilled ADRs

Invoke the adr-reviewer agent on each newly created ADR. For large batches, review the most important 3-5 ADRs and spot-check the rest.

Fix Critical findings before accepting the ADRs.

2.6 Accept and Cross-Reference

Since these are historical decisions already in effect:

govctl adr accept <ADR-ID>
govctl adr add <ADR-ID> refs <related-ADR-or-RFC>

2.7 Commit Batch

Group related ADRs into logical commits:

Use /commit with docs(adr): backfill ADRs for existing architectural decisions.

---

PHASE 3: BACKFILL RFCs (Optional)

Only if the user confirmed existing specifications in Phase 1. Most migrations skip this phase.

3.1 Create RFC from Existing Spec

govctl rfc new "<spec title>"

3.2 Create Clauses from Existing Requirements

For each requirement in the existing specification:

govctl clause new <RFC-ID>:C-<NAME> "<title>" -s "Specification" -k normative
govctl clause edit <RFC-ID>:C-<NAME> text --stdin <<'EOF'
[Clause text extracted from existing spec, rewritten with RFC 2119 keywords]
EOF

3.3 Review Backfilled RFCs

Invoke the rfc-reviewer agent on each newly created RFC. For large batches, review the most important RFCs first and spot-check the rest.

Fix Critical findings before making the RFC authoritative.

3.4 Finalize and Advance

Migration is a historical backfill workflow. Only finalize and advance the RFC after the user confirms the spec is already implemented and tested:

govctl rfc finalize <RFC-ID> normative
govctl rfc advance <RFC-ID> impl
govctl rfc advance <RFC-ID> test
govctl rfc advance <RFC-ID> stable

3.5 Commit

Use /commit with docs(rfc): backfill RFCs for existing specifications.

---

PHASE 4: ANNOTATE SOURCE

Add [[...]] references to existing source code so govctl check can trace implementations to their governing artifacts.

4.1 Scan and Annotate

For each newly created ADR/RFC, find the source files that implement the decision or specification:

# Example: if ADR-0001 decided to use PostgreSQL
# Find database-related files and add reference comments:

Add comments in the project's comment style:

# Per [[ADR-0001]], we use PostgreSQL for persistence

// Implements [[RFC-0001:C-VALIDATION]]

// Per [[ADR-0003]], API responses use camelCase

4.2 Validate References

govctl check

Fix any broken references. All [[...]] references must resolve to existing artifacts.

4.3 Commit

Use /commit with chore(gov): annotate source with governance artifact references.

---

PHASE 5: ESTABLISH BASELINE

Create work items for any in-progress work discovered in Phase 1.

5.1 Create Work Items

For each active task:

govctl work new --active "<task title>"
govctl work set <WI-ID> description "<what is being done>"
govctl work add <WI-ID> acceptance_criteria "add: <expected outcome>"
govctl work add <WI-ID> refs <related-ADR-or-RFC>

5.2 Establish Tag Vocabulary (Optional)

If the project benefits from cross-cutting categorization, set up a tag vocabulary and tag the backfilled artifacts:

govctl tag new "architecture"
govctl tag new "security"
govctl tag new "performance"
govctl adr add <ADR-ID> tags "architecture"
govctl rfc add <RFC-ID> tags "security"

Skip this step if tagging is not needed yet — it can be adopted incrementally later.

5.3 Final Validation

govctl check
govctl render

5.4 Final Commit

Use /commit with chore(gov): establish govctl governance baseline.

---

PHASE 6: SUMMARY

Present the migration results:

=== MIGRATION COMPLETE ===

Project: <project name>

Artifacts created:
  ADRs: N (documenting existing architectural decisions)
  RFCs: N (codifying existing specifications)
  Work Items: N (tracking in-progress tasks)

Source annotations: N files annotated with [[...]] references

Validation: govctl check passes

Next steps:
  - Use /gov for all new work going forward
  - Use /discuss for new design decisions
  - Incrementally annotate more source files as you touch them
  - Run govctl check in CI to enforce governance going forward

---

TIPS

Prioritization

Not everything needs an ADR. Focus on decisions that:

• Affect multiple developers (framework choice, API conventions)
• Are hard to reverse (database choice, authentication strategy)
• Generate recurring questions ("Why do we use X instead of Y?")

Skip trivial decisions (indentation style, variable naming) — those belong in a linter config, not an ADR.

Handling Uncertainty

When discovering decisions:

• If you can identify the decision but not the rationale → say so in the context. "The rationale is not documented; this ADR records the current state."
• If alternatives are unknown → omit alternatives and say in the ADR context that non-selected options were not recoverable.
• If alternatives are known → capture them first and let the decision prose summarize the conclusion, rather than skipping straight to the final answer.
• If consequences are unclear → document what you can observe. "The negative consequences of this decision have not been formally evaluated."

Incremental Migration

It's fine to migrate in stages:

• Week 1: Scaffold + top 5 most important ADRs
• Week 2: Annotate the most-touched modules
• Later: Backfill as you encounter undocumented decisions during regular work

The /gov workflow naturally extends migration — every new decision gets an ADR, every new feature gets a work item.