Academic citation toolkit — verify reference authenticity or write literature reviews with auto-generated bibliographies. Checks paper existence, metadata accuracy, and whether cited claims are actually supported. Supports PDF, DOCX, TXT, Markdown, LaTeX. Use when user asks to: "check citations", "verify references", "audit citations", "validate my references", "are these citations real", "write introduction", "write literature review", "review my lit review", "generate bibliography", "format references", "check my paper's citations", "citation audit", "fact-check references", "proofread citations", "verify my bibliography", "帮我查引用", "检查论文引用", "写文献综述", "验证参考文献", "引用查证". Merges former citation-check and introduction-review skills.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Academic citation toolkit — verify reference authenticity or write literature reviews with auto-generated bibliographies. Checks paper existence, metadata accuracy, and whether cited claims are actually supported. Supports PDF, DOCX, TXT, Markdown, LaTeX. Use when user asks to: "check citations", "verify references", "audit citations", "validate my references", "are these citations real", "write introduction", "write literature review", "review my lit review", "generate bibliography", "format references", "check my paper's citations", "citation audit", "fact-check references", "proofread citations", "verify my bibliography", "帮我查引用", "检查论文引用", "写文献综述", "验证参考文献", "引用查证". Merges former citation-check and introduction-review skills.
LLM normalizes: convert ANY citation format ([REF01], \cite{key}, [@key], bare [1], etc) to [CITE:descriptiveKey]
Script verifies: cite_table.py only reads [CITE:key]. Hard-coded, deterministic.
Table proves: every normalized citation appears in output — nothing missed or invented.
When NOT to Use
Single-paper summary, pure grammar polishing, non-academic writing, format conversion only.
Five Scenarios
User says
Agent does
New review
Draft with [CITE:xxx] → script → table
Rewrite draft
Normalize existing citations to [CITE:xxx] → script → table
Add citation
Insert [CITE:xxx] → re-run script → table
Remove citation
Remove [CITE:xxx] → re-run script → table
Audit
Re-run script → checks → table
Every scenario ends: cite_table.py → Read cite_output.txt → paste table + checks. Then proceed to silent quick check below.
The draft always uses [CITE:descriptiveKey] placeholders. The script numbers them and outputs the table — but the source of truth is the draft itself. Self-audit checks are always performed against the draft with [CITE:xxx] placeholders, never against the numbered output alone.
Always-On Checks
After every citation change, re-run cite_table.py and walk through:
Stacking — >3 in one bracket? Warn. >5? Block.
Format — venue mismatch? Load references/citation-formats.md (on-demand) when user specifies a venue. Re-check after ref generation.
Tone — references/diplomatic-critique.md (loaded at startup). Never "fails to", "ignores", "fundamentally flawed".
Citation depth — most citations: who + did what + found what + [CITE:xxx]. Opening/transition sentences can be broad. Body paragraphs: each cited paper gets its own sentence.
Two valid positions: sentence-end (...reduced errors by 23% [CITE:smith2023].) or natural pause (...as shown in prior work [CITE:jones2021;CITE:lee2022], the trend...).
NEVER: , [CITE:xxx], (comma sandwich) or Smith [CITE:smith2023] proposed (author-attached). Script flags these as ⚠️.
Report: one line per check, ✅ or ⚠️. Then full re-scan (never fix one and skip the rest). Then read all [CITE:xxx] aloud from the draft to catch awkward flow.
Table Protocol (Mandatory)
Auto-detect .bib file in project dir. If found, use --bib mode.
python ${CLAUDE_SKILL_DIR}/scripts/cite_table.py <draft> [--bib <bib_file>]
Read: ${CLAUDE_SKILL_DIR}/scripts/cite_output.txt
→ Paste table + audit. Then: "Need to add, remove, or change any citations?"
Without --bib: 5 columns (# | Author | Body Context | Reference | Status). With --bib: 6 columns comparing body order, bib key, bib position, and reference list order. Bilingual (中文/English auto-detected). Repeated citations get ↳ sub-rows.
Reference Files
anti-laziness-protocol.md — loaded at startup. Mandatory 5-step verification gate. Itemized only, no batching.
citation-placement-rules.md — loaded on-demand during self-audit checks. Citation position rules (sentence-end / comma sandwich / author-attached).
diplomatic-critique.md — loaded at startup. Mandatory tone guard.
citation-formats.md — loaded on-demand when user specifies a venue. IEEE/SCI/EI/GB7714/APA/MLA/Chicago/ACM rules.
citation-fields.md — loaded on-demand for metadata cross-checking by citation type.
Script
cite_table.py — single core engine. Scan, number, table, position check, bilingual, --bib mode.
Phase 3 — Auto Quick Check (Silent, Small Drafts Only)
After every write scenario completes, count unique [CITE:xxx] placeholders:
Unique citations
Action
< 5
Run silent quick check
≥ 5
Skip — defer to Phase 5 (too many citations for per-edit checking)
When the threshold is met (< 5 refs):
Extract all unique [CITE:xxx] placeholders from the draft
For each, run a quick existence check only (no metadata/content layers):
Try DOI lookup → arXiv lookup → title search. Stop at first hit.
If all fail → flag as ❓ unchecked
Output a one-line summary:
Quick check: 3 refs — 3 found ✅
No AskUserQuestion. If all found → no extra output beyond the summary line. If any unchecked → flag it and note that Phase 5 will offer a deeper check.
Phase 4 — Deep Citation Verification (On Request)
Reachable via two paths:
Direct: user provides a file and says "check citations" → start here after Phase 0
Upgrade: after completing all writing, Phase 5 offers this → jump here
4.1 — Ask Scope & Depth
Call AskUserQuestion with two questions:
Question 1 — Scope (single-select)
header: "Scope"
options:
all / "Verify all (M unique papers)"
selected / "Manual selection (e.g. 1,3,5-8)"
multiSelect: false
Question 2 — Depth (single-select)
header: "Depth"
options:
quick / "Quick — Abstract/TLDR only (~10-15k tokens/citation)"
normal / "Normal — Abstract+Intro+Conclusion (~20-50k tokens/citation) [Recommended]"
deep / "Deep — Full-text section-by-section (~50-150k tokens/citation) [Token-heavy]"
multiSelect: false
Wait for user response before Phase 4.2.
4.2 — Read File
Format
Method
PDF
mcp__pdf-reader__read_pdf
DOCX
python-docx via Bash
TXT/MD
Read
LaTeX
Read + parse \cite{}\bibitem{}
4.3 — Extract Citations
Output raw list:
File: paper.pdf (5 pages) | Found N citations | Type: journal/conference/...
[1] journal | Vaswani et al. (2017) "Attention Is All You Need"
Location: §I, "code-centric automation..."
[2] ...
4.4 — Deduplicate
Normalize by title + first author (title: strip punctuation, lowercase; first author: last name). Same paper cited multiple times → merge, keep all locations.
Dedup: N raw → M unique papers (N-M duplicates removed)
[1,7] journal | Vaswani et al. (2017) "Attention Is All You Need"
Locations: §I "code-centric..." / §III "self-attention enables..."
[2] conference | ...
[3,5,9] preprint | ...
4.5 — Parallel Verification (10 per round)
Rules
Strictly 10 unique papers per round, overflow auto-continues
Each paper gets one independent general-purpose sub-agent, all launched in parallel
Agents update status via TaskUpdate
Round completes → auto-advance to next round
Single-paper agent task
Each agent receives: original number list (e.g. [1,7]), title, authors, year, DOI/ArXiv ID (if available), context around each citation location (±3 sentences).
Three-layer check:
Layer A — Existence (with fallback chain)
Try each step in order. Any success → stop. Max 1 retry per step (timeout/network). Failure → next step.
When the user indicates they are done with all writing (session ending, "looks good", "done", "submit", etc.), call AskUserQuestion with one question:
Question — Upgrade to deeper check? (single-select)
header: "Final Check"
options:
normal / "Normal — re-verify with Abstract+Intro+Conclusion (~20-50k tokens/citation) [Recommended]"
deep / "Deep — full-text section-by-section (~50-150k tokens/citation) [Token-heavy]"
no / "No — quick checks were sufficient"
multiSelect: false
Context: mention how many quick checks ran and how many refs passed ("We ran 3 quick checks on 15 refs — all found. Upgrade to a deeper verification?").
If user chooses normal or deep → jump to Phase 4 with that depth and all scope.
If user chooses no → output: "Done. Run /reference-workbench check <file> anytime to re-verify."
Optional MCPs (Not Required)
These enhance the skill but are not mandatory. If missing, the skill runs normally.
MCP
What it adds
Install
Zotero
Search your Zotero library, import papers, read PDF annotations, write Word docs with live citations
npx smithery install @alisoroushmd/zotero-mcp
DeepL
Academic translation (中文 ↔ English), glossary-locked terminology, rephrase for clarity
npm install deepl-mcp-server (needs free API key)
If installed, the agent can use them automatically during write sessions for reference management and translation tasks.
