nist-800-171

name

nist-800-171

description

Knowledge base from NIST SP 800-171 Rev. 3 (Protecting CUI in Nonfederal Systems). Use for CUI confidentiality requirements on contractors and other nonfederal organizations, the 17 requirement families, ODPs, SSPs, POA&Ms, and tailoring from SP 800-53. Covers 800-171r3 only; does not replace SP 800-171A assessment procedures, full SP 800-53 baselines, CMMC scoring mechanics, or classified-information controls.

NIST SP 800-171 Rev. 3 — Protecting CUI in Nonfederal Systems

Source: NIST SP 800-171r3 (US Government work, public domain) | Chapters: 8

When to use

Reach for this pack when scoping, implementing, or assessing security requirements for Controlled Unclassified Information on nonfederal systems — typically under federal contracts or agreements. It is the right starting point for mapping the 17 requirement families, filling organization-defined parameters, writing or reviewing a system security plan, tracking deficiencies in POA&Ms, isolating CUI components, or understanding how 800-171 was tailored from the SP 800-53 moderate baseline.

Prerequisites: none — plain Markdown; no MCP server, API key, or licence tier needed at runtime.

How to Use This Skill

• Without arguments — load the core frameworks below.
• With a topic — ask about CUI scope, a family (e.g., access control, incident response, supply chain), ODPs, SSP, POA&M, media sanitization, MFA, or SCRM; I read the relevant chapter.
• With a chapter — ask for ch01 through ch08.

Supporting files: glossary.md, patterns.md, cheatsheet.md.

Core Frameworks & Mental Models

Purpose and applicability

SP 800-171r3 gives federal agencies recommended security requirements to protect CUI confidentiality when that information resides in nonfederal systems and no category-specific safeguarding instrument already prescribes controls. Requirements apply only to components that process, store, or transmit CUI (or protect those components). Organizations operating systems on behalf of a federal agency are under FISMA, not this nonfederal CUI set.

Derivation and tailoring

Starting from SP 800-53 controls in the SP 800-53B moderate baseline, NIST removed items that are primarily a federal responsibility, unrelated to CUI confidentiality, adequately covered elsewhere, or not applicable. Assumptions include: CUI has the same value in federal and nonfederal custody; safeguards should be consistent; confidentiality impact is no less than moderate; nonfederal orgs may use external providers.

Seventeen requirement families

Family	Focus
Access Control	Accounts, least privilege, remote/mobile/wireless, flow control
Awareness and Training	Literacy + role-based training
Audit and Accountability	Logging, review, time stamps, log protection
Configuration Management	Baselines, change control, least functionality, inventory
Identification and Authentication	Unique ID, MFA, authenticators, passwords
Incident Response	Handling capability, plan, test, train, report
Maintenance	Tools, nonlocal sessions, personnel
Media Protection	Store, mark, transport, sanitize, backup crypto
Personnel Security	Screening, termination/transfer
Physical Protection	Facility access, monitoring, alternate sites, transmission lines
Risk Assessment	Assess risk, vulnerability monitoring, risk response
Security Assessment and Monitoring	Assess controls, POA&M, continuous monitoring, exchanges
System and Communications Protection	Boundaries, crypto, deny-by-default, sessions
System and Information Integrity	Patching, malware, alerts, monitoring, retention
Planning	Policies, system security plan, rules of behavior
System and Services Acquisition	Security engineering, unsupported components, external services
Supply Chain Risk Management	SCRM plan, acquisition strategies, supplier requirements

Organization-defined parameters (ODPs)

Many requirements contain assignment/selection operations. Agencies (or consortia) should set values; if they do not, the nonfederal organization must assign values to complete the requirement. Once set, ODP values are part of the requirement and drive consistent assessment.

Requirement structure

Each requirement has a normative statement, an informative discussion (not a scope expansion), and references to source SP 800-53 controls plus supporting publications. Example pattern: cryptographic protection types are assigned via ODP; discussion recommends FIPS-validated cryptography.

Scoping and exceptions

Isolate CUI components into separate security domains (physical and/or logical) to avoid over-hardening the entire enterprise. Document enduring limitations (e.g., specialized systems) in the SSP (03.15.02). Manage temporary deficiencies through POA&Ms (03.12.02).

Assessment companion

SP 800-171A provides assessment procedures. This pack explains what the requirements mean; 171A explains how to assess them.

Chapter Index

#	Section	Key content
ch01	CUI Scope, Fundamentals, and Structure	Applicability, tailoring, 17 families, ODPs, SSP/POA&M exception paths
ch02	Access Control + Identification & Authentication	Accounts, least privilege, remote/mobile, MFA, authenticators
ch03	Awareness, Personnel, Physical	Training, screening, offboarding, facility and alternate-site controls
ch04	Audit + Configuration Management	Logging lifecycle, baselines, change control, allow-by-exception software
ch05	Incident Response, Maintenance, Media	IR plan/capability, nonlocal maintenance, media sanitization and backup crypto
ch06	Risk, Assessment & Monitoring, Planning	Risk response, POA&M, continuous monitoring, SSP, rules of behavior
ch07	Communications Protection + Integrity	Boundaries, cryptography, patching, malware, system monitoring
ch08	Acquisition + Supply Chain Risk Management	Security engineering, external services, SCRM plan and supplier flow-down

Topic Index

• Access control / least privilege → ch02
• Alternate work site → ch03
• Audit logging / time stamps → ch04
• Authenticator / password management → ch02
• Backup confidentiality / media crypto → ch05, ch07
• Boundary protection / deny by default → ch07
• Configuration baseline / change control → ch04
• Continuous monitoring → ch06
• Cryptographic protection / key management → ch07
• CUI definition and scope → ch01
• External system services / cloud providers → ch08
• Flaw remediation / patching → ch07
• Incident response plan / handling → ch05
• Information exchange agreements → ch06
• Information flow enforcement → ch02
• Malicious code protection → ch07
• Media sanitization / marking / transport → ch05
• Multi-factor authentication (MFA) → ch02
• Nonlocal maintenance → ch05
• Organization-defined parameters (ODPs) → ch01, ch06
• Personnel screening / termination → ch03
• Physical access control → ch03
• Plan of action and milestones (POA&M) → ch06
• Remote / wireless / mobile access → ch02
• Risk assessment / vulnerability scanning → ch06
• Rules of behavior → ch06
• Security assessment → ch06
• Security engineering principles → ch08
• Supply chain risk management (SCRM) → ch08
• System security plan (SSP) → ch01, ch06
• Tailoring from SP 800-53 → ch01
• Training (literacy and role-based) → ch03
• Unsupported / end-of-life components → ch08

Supporting Files

• glossary.md — key 800-171 / CUI terms with chapter references
• patterns.md — implementation patterns (When / How / Trade-offs)
• cheatsheet.md — decision rules, family map, tells & smells

---

Scope & Limits

This pack covers NIST SP 800-171 Revision 3 (final 2024-05-14, DOI 10.6028/NIST.SP.800-171r3) — purpose, fundamentals, and the 17 security requirement families as synthesized reference notes. It does not cover: SP 800-171A assessment procedures in full; SP 800-53 control catalog detail beyond provenance; CMMC level scoring or assessment guides; DFARS solicitation clauses as legal advice; classified information (EO 13526) controls; or sector-specific CUI category instruments that supersede the moderate baseline. US Government public domain work; no copyright restrictions on the source document. No source-material download link is published.