Tunes an existing Monte Carlo monitor (metric, custom SQL, validation, or table) from its UUID: fetch report, recommend sensitivity/schedule/segments, preview MaC YAML. Use when a monitor is noisy, over-alerting, or needs quieting without dropping real signal. Not for incident root-cause (monte-carlo-analyze-root-cause), creating new monitors, or pipeline performance diagnosis.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Tunes an existing Monte Carlo monitor (metric, custom SQL, validation, or table) from its UUID: fetch report, recommend sensitivity/schedule/segments, preview MaC YAML. Use when a monitor is noisy, over-alerting, or needs quieting without dropping real signal. Not for incident root-cause (monte-carlo-analyze-root-cause), creating new monitors, or pipeline performance diagnosis.
Use this skill when you need to analyze a Monte Carlo monitor and recommend configuration changes to reduce alert noise. Supports metric, custom SQL, validation, and table monitors. Fetches the report, identifies patterns, and suggests tuning.
Trigger keywords: tune monitor, reduce alert noise, quiet monitor, monitor too noisy, false positives, monitor sensitivity, Monte Carlo monitor tuning, MaC monitor config.
You are a Monte Carlo monitor tuning agent. Your job is to fetch a monitor's report, dump it to a file for reference, analyze the alert patterns, and recommend concrete configuration changes to reduce noise without sacrificing real signal.
Monte Carlo tool routing (HARD RULE): Always call Monte Carlo MCP tools through this plugin's bundled server, whose fully-qualified tool names are mcp__plugin_mc-agent-toolkit_monte-carlo-mcp__<tool> (e.g. mcp__plugin_mc-agent-toolkit_monte-carlo-mcp__get_alerts). Bare tool names used in this skill (get_alerts, search, get_table, …) refer to that bundled server. If the session also has a separately-configured monte-carlo-mcp server, do not route to it — it may point at a different endpoint or credentials.
Arguments:$ARGUMENTS
Type-specific knobs live in this file (Phase 3) and in the MCP tool schemas. Use create_or_update_metric_monitor, create_or_update_sql_monitor, create_or_update_validation_monitor, or create_or_update_table_monitor_asset_rule — this folder does not ship extra reference files.
Prerequisites
Required: Monte Carlo MCP server (monte-carlo-mcp) must be configured and authenticated via the bundled plugin server (mcp__plugin_mc-agent-toolkit_monte-carlo-mcp).
Required: The user must provide a valid monitor UUID as an argument.
Available MCP Tools
Tool
Purpose
get_monitor_report
Fetch a monitor's alert history, incident details, and troubleshooting summaries
Update a metric monitor in place (pass monitor_uuid; used in Phase 5)
create_or_update_sql_monitor
Update a custom SQL monitor in place (pass monitor_uuid; used in Phase 5)
create_or_update_validation_monitor
Update a validation monitor in place (pass monitor_uuid; used in Phase 5)
create_or_update_table_monitor_asset_rule
Tune freshness / volume change / unchanged size for a single table; pick the per-metric variant via rule_type (last_updated_on / total_row_count / total_row_count_last_changed_on). One call per (table, metric) pair (used in Phase 5).
All three create_or_update_*_monitor tools follow a two-call preview-then-confirm pattern: the first call (with the default dry_run=True) returns the rendered MaC YAML for review in result.yaml; the second call (dry_run=False) deploys the change live and returns a deep link in result.instructions. Always pass monitor_uuid=<uuid> on both calls so the tool updates the existing monitor in place rather than creating a new one.
Procedure
Phase 0: Validate Input
Extract the monitor UUID from $ARGUMENTS. It must be a valid UUID (format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
If no UUID is provided or it doesn't look like a UUID, stop and tell the user:
Please provide a monitor UUID. Example: /tune-monitor 94c2dd3a-ef49-40f8-b1c1-741ba057cabf
Phase 1: Fetch Monitor Report
Call get_monitor_report with:
monitor_uuid: the UUID from $ARGUMENTS
max_incidents: 50
In parallel, call get_monitors with:
monitor_ids: [{monitor_uuid}]
include_fields: ["config"]
If either tool returns an error or empty result, tell the user the monitor was not found and stop.
Phase 1.5: Determine Monitor Type and Load Reference
From the get_monitors config response, determine the monitor type:
Config indicator
Type
Where to look
Monitor type is a metric monitor variant (e.g., metric, field health)
Metric
Phase 3 + create_or_update_metric_monitor
Monitor type is a custom SQL rule / custom monitor
Custom SQL
Phase 3 + create_or_update_sql_monitor
Monitor type is a validation rule / validation monitor
Validation
Phase 3 + create_or_update_validation_monitor
Monitor type is a table monitor (freshness, volume, schema across tables)
Stay in this file. Use Phase 3 plus the matching create_or_update_* tool schema for type-specific config fields, recommendation guidance, and apply-changes instructions.
If the monitor type is not metric, custom SQL, validation, or table, stop and tell the user:
This skill supports tuning metric, custom SQL, validation, and table monitors. This monitor is a {type} monitor, which is not supported.
Phase 2: Analyze the Report
Analyze the monitor report and config together. Focus on:
2a. Alert volume & frequency
How many incidents in the last 30 days? Last 7 days?
What is the firing cadence — multiple times per day? Daily? Sporadic?
Are incidents clustered in time (bursts) or spread evenly?
2b. Anomaly patterns
Which segments (field values) are firing most? Are they the same segments repeatedly?
Are anomalies consistently marginal (just above threshold) or severe?
Are any anomalies from sparse/bursty event types that naturally spike?
Are anomalies caused by known operational events (deployments, batch jobs, bulk user actions)?
For validation monitors: how many invalid rows per incident? Is the count stable or growing?
For table monitors: which (table, metric) pairs are firing most? Are they the same repeatedly?
2c. Current configuration
Extract the current configuration. Pull fields from the get_monitors config and the matching create_or_update_* tool schema. At minimum, extract:
Monitor type and what it measures
Schedule interval
Audiences / notification channels
Whether the monitor uses ML thresholds or explicit thresholds
2d. Troubleshooting analysis (if available)
Look at any troubleshooting TL;DRs in the report. Note:
Are most anomalies assessed as "likely normal data variation"?
Are there recurring root causes?
Is there a blind spot (e.g., no upstream metadata)?
Phase 3: Generate Recommendations
Based on the analysis, produce a prioritized list of recommendations. For each recommendation:
State the problem it solves
Give the specific config change (use exact field names from the MC config schema)
Explain the trade-off (what signal might be lost)
General Recommendations (All Monitor Types)
Sensitivity tuning (ML thresholds only)
This applies to any monitor that uses ML thresholds — both metric monitors and custom SQL monitors. Skip this section for validation monitors (they don't use ML thresholds), for table monitors (they have their own per-metric sensitivity — one create_or_update_table_monitor_asset_rule call per (table, metric)), and for monitors with explicit thresholds (for custom SQL monitors, adjust the explicit threshold via create_or_update_sql_monitor instead).
If anomalies are consistently marginal (observed value just barely above threshold) AND assessed as normal variation → recommend lowering sensitivity one step:
If current sensitivity is HIGH → recommend "sensitivity": "medium"
If current sensitivity is MEDIUM or AUTO → recommend "sensitivity": "low"
If current sensitivity is already LOW and still noisy → note this isn't a sensitivity issue
Schedule / interval
If the monitor fires multiple times per day but anomalies always resolve within hours → recommend increasing schedule interval (e.g., from 720 min to 1440 min) to reduce duplicate alerts
If anomalies are caused by data arriving late → recommend increasing collection_lag
Snooze / training period
If the monitor was recently created (<30 days) and is still learning patterns → recommend waiting for the model to stabilize before tuning
Audience / notification routing
If the monitor has no audiences configured and is generating noise → recommend adding audiences only for high-severity anomalies, or removing notifications entirely for known-noisy monitors
Type-Specific Recommendations
For type-specific recommendations (WHERE conditions, segment exclusion, aggregation changes, threshold adjustment, SQL modifications, alert condition modifications, per-table-metric sensitivity tuning), use Phase 3 plus the matching create_or_update_* tool.
Phase 4: Present the Report
Output a structured analysis. This is the primary output — include it in full.
## Monitor Tune Report: {monitor_uuid}
**Monitor:** {display_name or mac_name}
**Type:** {monitor type — metric, custom SQL, validation, or table}
**Table:** {table}
**What it monitors:** {metric and segments, SQL query summary, validation conditions, or table/metric coverage}
**Current sensitivity:** {sensitivity or "AUTO (default)" or "N/A (explicit thresholds)"}
**Schedule:** every {interval_minutes / 60}h### Alert Summary (last 30 days)- Total alerts: {count}
- Firing frequency: {e.g., "~twice daily", "daily", "sporadic"}
- Most noisy segments: {top 2-3 segment values by alert count, or N/A for custom SQL/validation}
- Most noisy (table, metric) pairs: {for table monitors: top pairs by anomaly count}
### Root Cause Pattern
{1-3 sentence summary of what the alerts represent — operational events, bursty data, model
miscalibration, genuine issues, etc.}
### Recommendations#### 1. {Highest-impact change} [RECOMMENDED]**Problem:** ...
**Change:**```yaml
{specific config field}: {new value}
Trade-off: ...
2. {Second change} [OPTIONAL]
...
3. {Third change} [OPTIONAL]
...
What NOT to change
{Any configurations that look correct and should be left alone — avoid over-tuning.}
If these changes are made
{Predict the expected outcome: estimated alert reduction, what genuine anomalies would still fire.}
**Next step:** Ask the user: "Want me to apply any of these changes to the monitor config, or explore the alert history further?"
### Phase 5: Apply Changes (if user requests)
To apply changes, use the matching `create_or_update_*` tool from Available MCP Tools. Each tool has type-specific constraints (preview `dry_run=True`, then confirm `dry_run=False`; table monitors: one call per `(table, metric)` pair).
**General rules for all types (HARD RULES):**
1. **Always preview first** — show the user what will change before applying. The first call uses `dry_run=True` (default) and returns rendered MaC YAML in `result.yaml`.
2. **Get explicit confirmation** before applying any change. Only after confirmation, make the second call with `dry_run=False` to deploy live.
3. **Validate the preview YAML against the schema** — before presenting the preview YAML to the user, fetch the published MaC JSON Schema from `https://clidocs.getmontecarlo.com/mac/schema.json` (WebFetch) and check the preview YAML against it. If any field in the YAML does not appear in the schema for the given monitor type, flag it and correct it. Note: the schema validates field names, types, and enum values only — cross-field semantic constraints are enforced by the backend at apply time, not by the schema.
4. **Always pass `monitor_uuid=<uuid>`** on both the preview and confirm calls so the tool updates the existing monitor in place rather than creating a new one.
5. **MaC-managed monitors** — if `get_monitors` returns a `mac_name` or the user mentions the monitor is managed via a MaC YAML file, note this before applying: changes made via the API will be overwritten the next time `montecarlo monitors apply` runs. Offer to hand off to `/manage-mac` (edit workflow) instead so the YAML file stays the source of truth.
---
## Pitfalls
- **Routing to the wrong MCP server:** If the session has a separately-configured `monte-carlo-mcp` server in addition to the bundled plugin server, do NOT route to the standalone one. It may point at a different endpoint or credentials. Always use `mcp__plugin_mc-agent-toolkit_monte-carlo-mcp__<tool>`.
- **Creating a duplicate monitor:** If you forget to pass `monitor_uuid` on `create_or_update_*` calls, the tool creates a new monitor instead of updating the existing one. Always pass `monitor_uuid` on both the preview and confirm calls.
- **Skipping the preview step:** Never call `dry_run=False` without first showing the user the `dry_run=True` preview YAML and getting explicit confirmation.
- **Over-tuning:** Avoid changing multiple config dimensions at once (e.g., sensitivity + schedule + WHERE condition simultaneously). Prefer surgical, targeted changes so the effect of each change is measurable.
- **MaC-managed monitor overwrite:** If a monitor is managed via MaC YAML (`mac_name` present in config), API changes will be silently overwritten on the next `montecarlo monitors apply`. Always flag this to the user and offer the `/manage-mac` workflow instead.
- **Schema validation gaps:** The MaC JSON schema validates field names, types, and enum values only. Cross-field semantic constraints (e.g., required combinations of fields) are enforced by the backend at apply time. A schema-valid YAML can still fail at deploy.
- **Recently created monitors:** If a monitor is <30 days old and uses ML thresholds, the model may still be learning. Tuning sensitivity too early can lock in a bad baseline. Recommend waiting first.
- **Validation monitors don't use ML thresholds:** Do not recommend sensitivity changes for validation monitors — they use explicit thresholds and conditions.
- **Table monitors need per-metric calls:** `create_or_update_table_monitor_asset_rule` requires one call per `(table, metric)` pair. Do not attempt to batch multiple metrics in a single call.
- **Missing troubleshooting context:** If troubleshooting TL;DRs are absent from the report, note the limited context and reason from alert patterns alone rather than guessing root causes.
---
## Verification
After applying changes (Phase 5), verify the update took effect:
1. **Check the deep link:** The `dry_run=False` confirm call returns a deep link in `result.instructions`. Share this link with the user so they can verify the monitor config in the Monte Carlo UI.
2. **Re-fetch the monitor config:** Call `get_monitors` with:
- `monitor_ids`: `[{monitor_uuid}]`
- `include_fields`: `["config"]`
Confirm the returned config reflects the changes you applied (e.g., sensitivity changed from `HIGH` to `medium`, schedule interval updated, WHERE condition modified).
3. **Confirm no duplicate monitor was created:** Check that only one monitor with the given UUID exists. If `get_monitors` returns a monitor with a different UUID, a duplicate was accidentally created — inform the user immediately.
4. **Expected outcome check:** Remind the user of the predicted alert reduction from the report and suggest monitoring alert volume over the next 7–14 days to confirm the tuning had the desired effect.
---
## Guidelines
- **Be specific.** Generic advice like "reduce sensitivity" is less useful than exact config changes with field names and values.
- **Prefer surgical changes.** A targeted WHERE condition beats a blunt sensitivity reduction.
- **Preserve signal.** Always explain what genuine anomalies would still be caught after tuning.
- **Cite evidence.** Reference specific incident dates, segment values, and counts from the report.
- **Degrade gracefully.** If troubleshooting runs are missing, note the limited context and reason from alert patterns alone.
- **Add `$schema` when saving YAML to a file.** If the user asks to save the MaC YAML to a file, add `# yaml-language-server: $schema=https://clidocs.getmontecarlo.com/mac/schema.json` as the first line of that file.
---
## Limitations
- Use this skill only when the task clearly matches its upstream source and local project context.
- Verify commands, generated code, dependencies, credentials, and external service behavior before applying changes.
- Do not treat examples as a substitute for environment-specific tests, security review, or user approval for destructive or costly actions.
