work-plan

name	work-plan
description	MUST use when user says 'copy plan', 'append plan', 'resume plan', 'load plan', 'start the plan', 'continue the plan', 'execute plan', 'run the plan', 'pick up where we left off', or when the AI exits plan mode and needs to transfer the plan into execution format. This skill manages the full lifecycle of project plans — from plan output to tracked checkbox execution with per-todo commits.

Work — Plan Execution Skill

Plan lifecycle management with tracked execution and context recovery

Activation

Three commands, each with its own activation message:

Command	Activation Message
Copy Plan	"Copying plan to execution format..."
Append Plan	"Appending to existing plan..."
Resume Plan	"Resuming plan execution..."

Context Guard

Context	Status
User says "copy plan", "start the plan"	ACTIVE — copy and begin execution
User says "append plan"	ACTIVE — append to existing plan
User says "resume plan", "continue the plan"	ACTIVE — resume from checkpoint
AI exits plan mode with approved plan	READY — suggest "copy plan" to user
After context reset in a project with plan file	READY — suggest "resume plan"
No project context	DORMANT — no plan action
Personal/casual conversation	DORMANT — no plan action

Command Dispatch

Command	What It Does
"copy plan"	Copy latest plan to [PLAN_LOCATION]/project-plan.md (fresh start)
"append plan"	Append latest plan to existing project-plan.md (add sections)
"resume plan"	Resume execution after context reset (pick up from next [ ])

---

Copy Plan

Step 1: Find Latest Plan

• Scan [PLAN_SOURCE_PATH] for plan files
• Sort by modification date, pick most recently modified
• If no plan files found: ask user to specify a plan file path or enter plan mode first

Step 2: Transform to Project Plan Format

• Convert plan steps/items into - [ ] checkbox todo items
• Preserve all architecture diagrams (ASCII, mermaid) from the original plan
• Add standard instructions header (see plan-format.md in plan location folder)
• Maintain logical phase/section grouping from the original plan
• No emoji in the plan file — clean, parseable markdown only

Step 3: Write Project Plan

• Check if [PLAN_LOCATION]/ folder exists — create if needed
• Write to [PLAN_LOCATION]/project-plan.md (overwrite if exists)
• Report: "Plan copied — [X] todo items ready for execution"

Step 4: Begin Execution

• Execute the Shared Execution Loop (see below)

---

Append Plan

Step 1: Find Latest Plan

• Same as Copy Plan Step 1

Step 2: Transform to Project Plan Format

• Same as Copy Plan Step 2

Step 3: Check Existing Plan + Line Limit

• Read current [PLAN_LOCATION]/project-plan.md
• Count total lines in the existing file
• If appending would NOT exceed [LINE_LIMIT] lines:
  • Append new content with a date separator:

    ---
    ## Appended: [YYYY-MM-DD]
    

  • Report: "Plan extended — [X] new items added, [Y] total items"
• If appending WOULD exceed [LINE_LIMIT] lines:
  • Rename current file to project-plan-YYYYMMDD.md (archived)
  • Create fresh project-plan.md with the new content only
  • Report: "Previous plan archived as project-plan-[date].md, new plan created"

Step 4: Begin Execution

• Execute the Shared Execution Loop (see below)

---

Resume Plan

Step 1: Read Current Project Plan

• Read [PLAN_LOCATION]/project-plan.md
• If file not found: report "No plan found — use 'copy plan' to create one"

Step 2: Parse Progress

• Count [x] items (completed)
• Count [ ] items (pending)
• Count [~] items (blocked)
• Identify the next pending [ ] item as the resumption point
• Read the Architecture section to restore technical context

Step 3: Report Status

• Display progress summary:

  Plan Status: [X] completed, [Y] pending, [Z] blocked
  Current Phase: [phase name]
  Next Task: [description of next pending item]
  

• Read architecture diagrams to restore technical understanding

Step 4: Resume Execution

• Execute the Shared Execution Loop from the next pending item

Recovery Context

After a context reset, the AI loses its working state. "resume plan" restores it entirely from the file:

• The plan file IS the recovery mechanism
• No user explanation needed — the AI reads the file and continues

---

Shared Execution Loop

The core cycle that all three commands use after setup:

For each [ ] todo item in order:
  1. Execute the task (write code, create files, make changes)
  2. If Auto-Commit is installed → trigger commit for this completed item
  3. Mark the item as [x] in the plan file
  4. Every 5 completed items → save/update the plan file (checkpoint)
  5. Move to the next [ ] item
  6. If item is [~] (blocked) → skip and continue to next

Key Behaviors

• Per-task commits — each completed todo gets its own commit (not batched)
• Checkpoint saves — plan file is updated every 5 items to prevent loss
• Skip blocked items — [~] items are flagged and skipped, not stalled on
• User can pause — if user says "stop" or "pause", halt at the current item

Without Auto-Commit

If the Auto-Commit System is not installed, the execution loop still works:

• Tasks are executed and marked [x] in the plan file
• Commits must be done manually by the user
• The plan file still serves as the recovery mechanism

---

Mandatory Rules

1. Commit chain per-todo — every completed todo item triggers a commit (if Auto-Commit is installed). Not at the end, not in batches — every single one.
2. Never commit plan files — project-plan*.md stays local as the AI's working reference. Only code changes are committed.
3. Preserve diagrams — all visual elements (ASCII art, mermaid diagrams) from the original plan must be carried over to the plan file.
4. No emoji in plan files — clean, parseable markdown only.
5. Line limit enforcement — if the plan file exceeds [LINE_LIMIT] lines during append, rotate (archive old, create fresh).
6. Recovery-first design — the plan file IS the recovery mechanism after any context reset. Everything needed to resume must be in the file.
7. Skip blocked items — if a task is blocked, mark it [~], flag it to the user, and continue to the next item.
8. Checkpoint discipline — update the plan file every 5 completed items, even mid-execution.

Edge Cases

Situation	Behavior
Plan file not found	Prompt user: "No plan found — use 'copy plan' to create one"
All items completed	Report: "Plan complete! All [X] items done."
Blocked task	Mark [~], flag to user with reason, continue to next item
User says "stop" or "pause"	Halt at current item, save plan file, report progress
Plan exceeds line limit	Archive old file as project-plan-YYYYMMDD.md, start fresh
No plan source files found	Ask user to enter plan mode first or specify a file path
Context reset mid-execution	User says "resume plan" to continue from last checkpoint
Multiple plan files in source	Pick most recently modified, confirm with user

Level History

• Lv.1 — Base: Three commands (copy/append/resume) + shared execution loop + per-todo commit chain + line rotation + recovery mechanism + checkpoint saves. (Origin: Production AI companion plan execution workflow)
• Lv.2 — Wave Execution: Dependency-aware wave grouping — independent tasks within a phase can be executed in parallel via sub-agents, with wave barriers enforcing order between dependent groups.