add-instrument-driver

name

add-instrument-driver

description

Scaffold a new instrument driver for a vendor/model from its programming reference (SCPI/programming manual/API SDK as a PDF, doc, HTML file, or website URL) and wire it into the repo per AGENTS.md conventions. Use when asked to "add a driver for <vendor> <model>", "write a driver from this manual/datasheet", or similar. Produces the driver module, registration, mocked-transport tests, and doc updates on a tracking branch.

Add an instrument driver from a manual/API

This skill turns a vendor programming reference into a correct, tested, registered driver PR. It follows the repo's existing conventions exactly — read AGENTS.md ("How to add a vendor driver", "Patterns and constraints", "DAQ driver state tracking") before deviating. When in doubt, duplicate explicit code rather than abstract. This repo deliberately prefers duplication over shared mixins/factories.

Prerequisites — gather before writing code

1. The programming reference. A path to a PDF/doc/HTML file, or a URL. If the user hasn't provided one, ask for it — do not guess SCPI commands or API code from model knowledge.
2. Vendor and model (e.g. "Siglent SPD3303"). Confirm the exact model family the driver should cover; SCPI surfaces and APIs are often shared across a series.
3. Category. One of psu, dmm, eload, daq, i2c, modbus, scope, ethernetip. Infer from the instrument type; confirm with the user if ambiguous.
4. Tracking issue + branch. Per AGENTS.md, no untracked work. Confirm an issue exists (or create one) and branch off main named after it (e.g. issue-142-siglent-spd-driver).
5. Core vs. contrib. Default to core (instro/<category>/drivers/) if the user is a maintainer, otherwise use contrib (packages/instro-contrib/instro/contrib/<category>/drivers/). Some instruments only exist in unstable (packages/instro-unstable/). See CONTRIBUTING.md for the bar. Ask if unclear.

Step 1 — Extract a structured command spec from the manual

Manuals are large and noisy. Delegate parsing to the manual-spec-extractor subagent (.claude/agents/manual-spec-extractor.md) so the heavy document tokens stay out of this conversation. Give it:

• the manual location (path or URL),
• the target category and its required methods (read them from the category base class — see Step 3),
• the vendor/model.

It returns a structured spec: per-method SCPI command(s), the error-query form and OK-prefix, the channel model, value formatting (decimal places, units), and which optional category methods the instrument supports. Review the spec against the manual yourself for anything safety- or wire-critical before coding.

If the manual is small or already pasted into the conversation, you may extract inline instead of spawning the agent — use judgment.

Step 2 — Read the reference driver for the category

The canonical shape is instro/psu/drivers/bk_9115.py. For other categories, read an existing driver in instro/<category>/drivers/ first — the method set and transport differ. Match the surrounding code's idiom, naming, and comment density.

Let the category you're adding to decide layout and conventions — the paths below are the core-category default, not universal. Categories in instro-unstable (e.g. scope) diverge, and a real driver in the category is the source of truth. Things that vary, observed in scope:

• Directory layout. scope nests drivers under a vendor subdir (drivers/<vendor>/<vendor>_<model>.py + a drivers/<vendor>/__init__.py), not the flat drivers/<vendor>_<model>.py.
• Docstring style. A category's base class may carry multi-paragraph docstrings (ScopeDriverBase does) even though the one-line rule holds elsewhere. Match the concrete sibling driver's idiom (Keysight/Tektronix scope drivers use one-liners), not the base.
• Unsupported-feature exception. Core PSU/DMM raise FeatureNotSupportedError; scope drivers raise plain NotImplementedError. Use whatever the category's reference driver uses.

Step 3 — Read the category base class

instro/<category>/<category>.py defines <Category>DriverBase. Note:

• Required methods are @abc.abstractmethod — you MUST implement all of them.
• Optional methods raise NotImplementedError/FeatureNotSupportedError by default. Override only the ones the instrument actually supports (per the Step 1 spec). For unsupported optional methods, follow the reference driver's pattern (e.g. BK9115 raises FeatureNotSupportedError).

Step 4 — Write the driver module

Create the driver at the path the category actually uses (see Step 2): core categories use instro/<category>/drivers/<vendor>_<model>.py; vendor-subdir categories like scope use packages/instro-unstable/instro/unstable/<category>/drivers/<vendor>/<vendor>_<model>.py. File name is the snake_case form (e.g. siglent_spd3303.py, siglent_sds1000x_e.py). Class name is <Vendor><Model> (e.g. SiglentSPD3303, SiglentSDS1000XE).

Rules (from AGENTS.md "Patterns and constraints"):

• Subclass the category base. class SiglentSPD3303(PSUDriverBase):
• Compose, don't subclass, the transport. For SCPI/VISA instruments hold a VisaDriver in __init__ and accept str | VisaConfig: def __init__(self, visa_resource: str | VisaConfig) -> None: then self._visa = VisaDriver(visa_resource). Keep the union — VisaConfig is the canonical customization vehicle. Drivers on other transports (LabJack handle, Aardvark module) take whatever their transport needs.
• Implement open/close to delegate to the transport.
• Per-driver error helpers, only if the device supports SYST:ERR?. Add driver-local _write_checked / _check_errors / _query_checked_float like BK9115. Do NOT extract these to a shared mixin. The OK-prefix ("0" for B&K/Rigol, "+0" for Siglent), command form (SYST:ERR? vs :SYST:ERR?), and the vendor name in the raised message are all per-device — take them from the Step 1 spec.
• Stateful sequences inline the lock. If a command needs channel-select before write (e.g. INST <n> then write), hold self._visa.lock() across the whole sequence rather than using _write_checked — see bk_9140.py.
• Type hints on all public methods. mypy is enforced.
• One-line docstrings max. No multi-paragraph docstrings, no comments that restate the code.

DAQ drivers — extra rules

If the category is daq, follow "DAQ driver state tracking" in AGENTS.md exactly (reference: instro/daq/drivers/keysight_34980a.py):

• Call super().__init__() at the top of __init__ (the base initializes the private channel/timing dicts and points_in_buffer).
• Record channels on the private dicts inside configure_* (self._ai_channels[channel.alias] = channel, etc.) — after programming the device.
• Read driver-owned state via the private self._<dict>, never the read-only @property (which allocates a fresh snapshot per access).
• No InstroDAQ reach-back / imports.

Step 5 — Register the driver

Registration follows the category's existing pattern — check how a sibling driver is wired before assuming:

• Core categories: edit instro/<category>/drivers/__init__.py, adding both the import and the __all__ entry.
• Workspace vendor packages (e.g. daq, i2c): the driver lives in its own package under packages/; register it in that package's drivers/__init__.py (import + __all__). The category's top-level drivers/__init__.py relies on pkgutil.extend_path to make the vendor-package subpackage importable — don't remove it.
• Contrib drivers: register in the corresponding contrib drivers/__init__.py (the smoke test picks it up automatically).

Step 6 — Write tests

Put tests where the category's existing driver tests live — don't assume the path. Core categories use tests/<category>/test_<category>_drivers.py; some categories keep driver tests in a single top-level file (e.g. scope → tests/test_instro_scope.py). Grep for an existing driver class name in tests/ to find the right file. The canonical pattern is in tests/psu/test_psu_drivers.py:

• Keep tests targeted: cover each driver invariant or edge case with the least necessary complexity. Do not add redundant matrices, broad helper layers, or rewrites whose main effect is making tests look like candidates for shared behavior. Do not add tests just to increase coverage numbers or case counts. You're almost definitely working on a feature/bugfix that needs test coverage, make sure that the tests that you write are actually testing what you think they are.
• Patch the driver's VisaDriver reference with autospec=True: patch("instro.<category>.drivers.<vendor>_<model>.VisaDriver", autospec=True).
• Provide fixtures for the patched class and instance; default visa.query.return_value to a no-error response (e.g. '0,"No error"' or '+0,"No error"' matching the device's OK-prefix).
• Assert wire-level commands: visa.write.assert_called_once_with("VOLT 5.000"), and that the error query fires (visa.query.assert_called_once_with("SYST:ERR?")).
• Use side_effect lists for query+error-check sequences.
• Cover: init builds the transport from both str and VisaConfig; open/close delegate; each implemented method's wire command; response parsing; _check_errors raises on a non-OK prefix.

Step 7 — Update docs (same PR)

Per AGENTS.md "Documentation":

• README.md — add the model to the "Supported devices" table for core categories. Categories in instro-unstable (e.g. scope) are listed under "Experimental modules" instead — update that prose, not the table.
• docs/guides/instrumentation/<category>.mdx — add a guide entry only if the device introduces a new user-facing workflow.
• If a new public API/category was introduced (rare for a single driver), update docs/reference/src/ and docs/guides/docs.json navigation too.
• Do not hand-edit CHANGELOG.md (release-please generates it).

Step 8 — Verify

Run the repo gates and fix anything they flag:

just check    # ruff format, mypy, ruff lint
just test     # mocked unit tests, no hardware

If both pass, CI will pass. Then summarize for the user: the new driver, what optional capabilities it supports/omits (and why).

Step 9 — Offer hardware validation

Mocked unit tests prove the wire commands are shaped right; they cannot prove the driver works against the real instrument. Once the driver is written and the mocked gates pass, ask the user whether they have the physical device on hand:

The driver passes its mocked unit tests. Do you have the actual <vendor> <model> connected right now? If so, I can write a standalone hardware-validation script that exercises every method against the real device and self-correct the driver from what it finds.

• If yes: gather the device identifier/connection string, exact model, vendor, channel count, and what's wired to each channel (stimulus/loopback), then invoke the validate-driver-hardware skill with those details. It writes a hardware validation script, runs it against the device, and iterates on the driver until every supported method passes.
• If no: stop here. Remind the user the wire-level behavior should still be confirmed against real hardware before merge, and that they can run the validate-driver-hardware skill later when the device is available.

Anti-patterns to refuse

• No vendor-string factory (Instrument.create(vendor=...)). Construct drivers explicitly: InstroPSU(name="x", driver=BK9115(...), num_channels=1).
• No shared error-handling/transport mixin or base helper.
• No driver-side facade or reference back to the category HAL.
• No import-time dependency on optional vendor SDKs (defer in open() if the transport needs it, like Aardvark).
• No guessing commands the manual doesn't show. If a required method's command is unknown, flag it for the user rather than inventing one.
• No edits to shared/core library code. Scope is the driver module, its registration, its tests, and docs — never instro/lib/ (transports like VisaDriver, instro/lib/types.py), the category base class, or the HAL. If the driver seems to need a transport capability the public API doesn't expose, use the VISA escape hatch (self._visa._inst under self._visa.lock()) from within the driver, or flag the gap to the user — don't modify lib.