Host setup for TAO GPU backends. Checks and, after user approval, installs minimum-compatible NVIDIA driver, CUDA Toolkit, and NVIDIA Container Toolkit versions for Docker/local-Docker and Kubernetes GPU worker hosts. TAO-wide defaults can be overridden by the selected model's runtime profile. The `--check-only` path works on any Linux distribution; `--install` automates debian-family (Ubuntu/Debian/Pop!_OS/Mint/Zorin/Raspbian), rhel-family (Fedora/RHEL/Rocky/AlmaLinux), and suse-family (openSUSE/SLES) hosts, and prints actionable manual-install steps for everything else. Use when the user asks to "set up an NVIDIA GPU host", "check TAO Docker GPU runtime", or prepare a Kubernetes GPU worker for TAO.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Host setup for TAO GPU backends. Checks and, after user approval, installs minimum-compatible NVIDIA driver, CUDA Toolkit, and NVIDIA Container Toolkit versions for Docker/local-Docker and Kubernetes GPU worker hosts. TAO-wide defaults can be overridden by the selected model's runtime profile. The `--check-only` path works on any Linux distribution; `--install` automates debian-family (Ubuntu/Debian/Pop!_OS/Mint/Zorin/Raspbian), rhel-family (Fedora/RHEL/Rocky/AlmaLinux), and suse-family (openSUSE/SLES) hosts, and prints actionable manual-install steps for everything else. Use when the user asks to "set up an NVIDIA GPU host", "check TAO Docker GPU runtime", or prepare a Kubernetes GPU worker for TAO.
license
Apache-2.0
compatibility
Runs `--check-only` on any Linux distribution. `--install` automates Ubuntu 22.04/24.04 + Debian 12 (apt), Fedora + RHEL/Rocky/AlmaLinux 9/10 (dnf), and openSUSE Leap / SLES 15 (zypper). Requires sudo/root, internet access to NVIDIA package repositories (and download.docker.com on rhel-family), and an x86_64 or aarch64 (sbsa) host. Other distributions (Arch, Alpine, Gentoo, NixOS, …) get a clear error that names the version targets and the NVIDIA install-guide URL.
metadata
{"author":"NVIDIA Corporation","version":"0.1.2"}
allowed-tools
Read Bash
tags
["setup","nvidia","cuda","docker","kubernetes"]
NVIDIA GPU Host Setup
Standalone install? If this session was not initialized by the TAO skill bank plugin, run the tao-setup skill first (host preflight, credentials, cross-skill discovery).
Use this setup skill before TAO workflows run on the docker, local-docker,
or kubernetes backend. The TAO-wide default minimums are:
Docker engine — only installed for docker / local-docker backends and
only when Docker is missing. The package picked depends on the distro
family (docker.io on Debian-family by default, moby-engine /
docker-ce from download.docker.com on RHEL-family, docker on
SUSE-family). Pass --skip-docker-install to opt out.
The check is safe and read-only by default — it works on any Linux
distribution because it only probes nvidia-smi, the CUDA toolkit path,
the installed container-toolkit package version (via dpkg/rpm/the
nvidia-ctk binary version), and the Docker daemon's NVIDIA runtime.
Installation must be explicitly authorized by the user and rerun with
--install. The install path is automated for these distro families:
Family
Tested distros
Manager
Notes
debian
Ubuntu 22.04 / 24.04, Debian 12 (and derivatives Pop!_OS, Mint, Zorin, Raspbian, KDE Neon, etc. via UBUNTU_CODENAME / VERSION_CODENAME)
Adds NVIDIA cuda-<distro>.repo + Container Toolkit . Docker via Fedora when available, otherwise from .
.repo
moby-engine
docker-ce
download.docker.com
suse
openSUSE Leap 15, SLES 15
zypper
Adds the same NVIDIA .repo files. Docker via the distribution docker package.
other (Arch, Alpine, Gentoo, NixOS, FreeBSD, …)
n/a
n/a
--install exits with a clear error listing the version targets and the NVIDIA install-guide URLs. Install manually, then rerun --check-only.
Quick Start
From the skill bank root:
# Check the local Docker backend host.
bash skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh --backend docker --check-only
# Install or repair after user approval.
bash skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh --backend docker --install
# Check a Kubernetes GPU worker host.
bash skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh --backend kubernetes --check-only
⚠️ Note — running non-interactively (agent/skill runs): a skill run has no terminal, so the
installer's Continue? [y/N] prompt cannot be answered. After running --check-only to preview and
getting the user's approval, append the assume-yes flag (--yes) to the --install command so it
proceeds without a prompt — this auto-confirms installation of system packages (NVIDIA driver, CUDA
Toolkit, NVIDIA Container Toolkit, and Docker for Docker backends) and modifies the host, so only do
this on a host you control. A person running --install directly at a terminal gets the prompt instead.
Workflow Contract
Docker and Kubernetes workflows must run the check before submitting GPU work:
SB="${TAO_SKILL_BANK_PATH:-${TAO_SKILL_BANK_ROOT:-$PWD}}"
SETUP_SCRIPT="${SB}/skills/platform/tao-setup-nvidia-gpu-host/scripts/setup-nvidia-gpu-host.sh"
bash "$SETUP_SCRIPT" --backend docker --check-only || {
echo"MISSING: TAO GPU host runtime is not ready."echo"After user approval, run (append --yes for non-interactive agent runs):"echo" bash \"$SETUP_SCRIPT\" --backend docker --install"exit 1
}
Never install silently. If the check fails, explain what is missing, ask the
user to authorize the fix, then run the install command and rerun the check.
Model Runtime Override Contract
Platform defaults apply when a model has no override. A model that needs a
different validated host stack declares it in
references/skill_info.yaml:
Read those values before the final platform preflight and pass them to the
matching --min-*-version flags. Model minimums take precedence for that
workflow only; do not rewrite the platform defaults or requirements for other
models. Version checks use numeric lower bounds, so later compatible releases
pass. Always retain the selected-image GPU smoke test because a version bound
cannot prove support for a particular GPU architecture.
What The Installer Does
The installer dispatches on the detected distribution family. On every
supported family it adds NVIDIA's CUDA and Container Toolkit repositories
(if missing), installs packages that satisfy the active minimums, optionally
installs Docker, wires the NVIDIA Docker runtime, and adds the invoking user to
the docker group.
Common steps (all families):
Adds NVIDIA's CUDA repository if missing (apt cuda-keyring deb,
cuda-<distro>.repo for dnf/zypper).
Adds NVIDIA's Container Toolkit repository if missing (.list for apt,
.repo for dnf/zypper).
Installs the matching kernel header / devel package for the running
kernel.
Installs the current open-driver and Container Toolkit packages from the
configured repositories plus the CUDA Toolkit package selected by
--min-cuda-version, then verifies all three against the active minimums.
For Docker backends and when Docker is missing, installs Docker
(override / opt-out flags below), enables/starts the daemon, then runs
nvidia-ctk runtime configure --runtime=docker and restarts Docker
when systemctl is available.
Adds the invoking user ($SUDO_USER if available, else $USER) to the
docker group so subsequent shells can run docker without sudo —
opt out with --skip-docker-group. The new group membership does not
take effect in the current shell: log out and back in, or run
newgrp docker in each new shell.
Attempts modprobe nvidia so verification can pass before reboot.
current nvidia-open (override: $NVIDIA_DRIVER_PACKAGE_DEBIAN)
current nvidia-driver-cuda, kmod-nvidia-open-dkms (override: $NVIDIA_DRIVER_PACKAGE_RHEL, $NVIDIA_DRIVER_KMOD_RHEL)
current nvidia-open-driver-G06-signed-kmp-default (override: $NVIDIA_DRIVER_PACKAGE_SUSE)
CUDA toolkit
package derived from the active minimum, such as cuda-toolkit-13-0
same
same
Container Toolkit
current nvidia-container-toolkit + base/tools/libs, then minimum-version validation
same
same
Docker
docker.io (override: $DOCKER_PACKAGE_DEBIAN)
moby-engine+moby-cli on Fedora when available, else docker-ce docker-ce-cli containerd.io from download.docker.com
docker
Verification
After installation, verify:
nvidia-smi
nvcc --version
docker info --format '{{json .Runtimes}}' | grep nvidia
sudo docker run --rm --runtime=nvidia --gpus all "$TAO_IMAGE" nvidia-smi -L
The detected driver, CUDA Toolkit, and Container Toolkit versions must meet the
active TAO-wide or model-specific minimums. Then run the selected image's GPU
smoke test; version comparison alone is not sufficient compatibility proof.
For a Cosmos backend, extend that smoke with the backend contract's Python and
entrypoint checks. Cosmos Framework must execute
/workspace/.venv/bin/python as a non-root UID, import
cosmos_framework.callbacks.tao_status, find native torchrun, and verify the
A100 PatchEmbed compatibility marker when the host reports compute capability
8.0. Cosmos-RL must resolve its requested action executable, import
system PyAV for video workflows, resolve the restricted FFmpeg h264_cuvid
decoder, load libnvcuvid.so.1, verify the backward-safe linear Qwen3-VL
PatchEmbed marker, and verify its checkpoint loader accepts the prepared
qwen3_vl directory. A container that only passes nvidia-smi is not ready
for Cosmos training.
Kubernetes Notes
For self-managed Kubernetes clusters, run the host installer on every GPU
worker node or bake the same package set into the node image before installing
the NVIDIA GPU Operator or device plugin.
The workflow check also warns if kubectl is available but the cluster reports
no nvidia.com/gpu allocatable capacity. In that case, install/configure the
NVIDIA GPU Operator after the worker host runtime is ready:
Managed Kubernetes providers may own driver installation through node images or
GPU Operator policy. Do not overwrite a provider-managed GPU node without user
approval and a rollback plan.
Failure Modes
Unsupported distribution family: --install automates debian-, rhel-,
and suse-family hosts. On Arch, Alpine, Gentoo, NixOS, FreeBSD, or anything
without /etc/os-release (e.g. macOS), the script exits with a clear error
that lists the four version targets and the upstream NVIDIA install-guide
URLs:
Install those four pieces using your distribution's package manager and
rerun the script with --check-only to verify. The check is universally
portable — it only queries the binaries / package databases — so once the
runtime is in place the workflow contract is satisfied regardless of the
underlying distro.
Unsupported Ubuntu/Debian derivative: When ID is e.g. pop, mint,
zorin, raspbian, or another debian-family derivative, the script maps
the host onto the upstream Ubuntu/Debian CUDA repo via UBUNTU_CODENAME /
VERSION_CODENAME (focal/jammy/noble → Ubuntu 20.04/22.04/24.04;
bullseye/bookworm/trixie → Debian 11/12/12). If the host's codename
doesn't match a known upstream release, --install exits with the same
manual-install guidance described above.
Docker not installed: --check-only reports MISSING: Docker is not installed and prints the exact rerun command appropriate to the detected
distro family. The default --install path installs Docker (docker.io /
moby-engine / docker-ce / docker depending on family), enables/starts
the daemon, configures the NVIDIA runtime, and adds the invoking user to
the docker group. If you prefer to manage Docker yourself, install it
before rerunning the script or pass --skip-docker-install.
Docker installed but docker run still needs sudo: The script adds the
invoking user to the docker group, but Linux only refreshes group
membership on a new login session. Log out and back in, or run
newgrp docker in each new shell, until the new membership is active.
Docker runtime still missing: Restart Docker, then rerun
nvidia-ctk runtime configure --runtime=docker.
Detected version is below the active minimum: Rerun the same command with
--install after approval, preserving any model-specific --min-*-version
flags. Package-name environment overrides select distribution-specific driver
packages but do not weaken the minimum-version checks.
Driver installed but nvidia-smi fails: Load the module with
sudo modprobe nvidia or reboot. Secure Boot may require MOK enrollment on
systems where it is enabled.
Kubernetes still has no GPU capacity: Confirm the driver works on each GPU
node with nvidia-smi, then check the GPU Operator/device plugin pods and node
labels.
