fractal

name	fractal
description	Hierarchical agent loops with recursive self-organization.
argument-hint	[directive]
disable-model-invocation	true

Fractal

A fractal is a tree of autonomous agent loops, each in its own git worktree. A node iterates toward a goal and can spawn child nodes that work subtasks in parallel.

This skill configures a node with the user, then launches it in tmux; from there it runs autonomously — iterating, committing, and spawning children as needed.

Your role does not end at launch. The user (root) node has no loop of its own — you are it. Once a node is running you are its operator: you watch the tree, steer it, and relay between it and the user on their behalf. See Operator below.

Directive

$ARGUMENTS is a natural-language directive describing what this fractal should do. Interpret it: distill the node's goal, and map anything the user pinned down (a name, a budget, a model, limits, ...) onto the parameters below, each of which becomes the matching fractal node init flag. The /fractal skill routes all the configuration to fractal node init and passes only --continue/--clean (when the directive asks to continue an existing node) to fractal node start — plus --max-cost when it accompanies a continue (a continue re-arms the cap at start, not init).

Parameters — all configuration. Set by fractal node init, written to config.json, and editable there before launch:

• name: node name (required; letters, digits, and _ only — no -)
• path: project root, repo root or monorepo sub-project (default: .)
• title: human-readable display name (default: de-slugged node name)
• scope: restrict commits to subdirectories within the worktree (comma-separated, e.g. parent/child,tests)
• base: branch to start from (default: current branch)
• meta: target node branch for meta-configuration
• inherit: seed surfaces from the parent node instead of the package seed (comma-separated: steps, scripts, skills, config, or all); agent config always inherits. A top-level spawn's parent is the user node, which carries no steps, scripts, or skills — the parameter is for configured nodes spawning children
• agent: agent command; inherits the user node's default when omitted
• provider: provider route for the agent (e.g. openrouter); inherits the user node's default when omitted
• model: model override; when omitted, the agent uses its own default model
• effort: reasoning-effort override; when omitted, each agent seed's own pinned level applies, not the vendor default
• max-iters: per-run iteration cap
• max-depth: maximum child node nesting depth
• max-children: maximum direct child nodes
• max-descendants: maximum total descendant nodes
• timeout: per-run time limit (e.g. 30m, 1.5h)
• iter-timeout: per-iteration time limit (e.g. 30m, 1.5h)
• step-timeout: per-step time limit (e.g. 30s, 10m); caps each step
• interval: fixed iteration schedule (e.g. 1h)
• sleep: delay between iterations (e.g. 10s)
• wait: sleep between approval-wait sync invocations (default: 1m)
• max-cost: cost ceiling in USD per run — runs are isolated, so each launch arms the cap anew; after a budget-ended run, node start --continue refuses without an explicit --max-cost
• max-iter-cost: per-iteration cost ceiling in USD
• max-step-cost: per-step cost ceiling in USD (warn-only when unenforceable)
• reserve-budget: budget reserved for cleanup; USD or N% of max-cost (default: 10%)
• sync: enable (default) or disable radio sync before each step
• detached: run each step as a separate agent session (default: one continuous session)
• local: skip pushing to remote after each commit

Start — fractal node start just launches; all run parameters come from config.json. A max_cost in config.json must be positive if set; a missing max_cost launches uncapped with a loud warning. Its only arguments:

• --continue: continue a stopped/exited node — the launch restores the worktree, so uncommitted project files refuse without --clean
• --clean: with --continue, discard uncommitted project files
• --max-cost: with --continue, re-arm the cost cap for the new run; required when the last run ended on its budget

After reading the directive, print, in this order:

1. Suggested NODE.md instructions — a draft ## Instructions section distilled from the directive; skip it when no goal can be inferred.
2. Suggested NODE.md completion requirement — a draft ## Completion Requirements section with concrete, verifiable conditions; skip it when none can be inferred (for open-ended work with no natural stopping point, note instead that the section stays empty and max-iters should cap the run).
3. Interpreted parameters — always: a table with one row per Parameters entry above, in order, and the value read from the directive; leave the value empty where the directive said nothing (the defaults apply).

Close with what could not be inferred — the last thing you say. If name or path is missing, ask: what should this fractal be named, and where should it live? Assume the current directory for path when it is a git repo that looks like the project in question; ask when it is not a git repo or does not naturally look like a project. Then, last of all, ask for any skipped draft: what should this fractal do, and what are its completion requirements? Inferred or asked, double-check everything with the user — printing the full table last is what lets them catch a misinterpreted parameter before anything is created.

Even when a directive is thorough, ask follow-up questions that refine the seed — tighter completion conditions, scope, caps — rather than proceeding on the directive alone; Step 2's conversation is where these land.

To change a setting after init, edit <node_dir>/config.json directly (the node reads it at launch), or use fractal node config set <key>=<value>. Run fractal node init --help for the full list. (--reset also reconfigures, but it wipes the node to a stock empty node — see the Reset case below — so it is the heavy option, not a setting tweak.)

Cost ceilings are soft: a node tracks spend (its own and its children's, including sync) but is never hard-stopped at --max-cost — it winds down inside its reserve and the loop ends the run at that iteration's boundary. The full budget doctrine — reserve pricing, cost remaining semantics, per-agent in-step enforcement, and how a budget-ended run reports — is canonical in the node's skills/fractal/SKILL.md Cost section; read it there when advising the user or reading a capped node's status.

Nodes run their agent with elevated permissions by design (Claude bypassPermissions, Codex danger-full-access, Grok always-approve, opencode "permission": "allow" plus --auto, omp approvalMode: yolo plus --yolo) so they can work unattended — only launch nodes whose task you trust to run autonomously.

Activation

Resolve these before proceeding:

• path: the interpreted path parameter, resolved to absolute.

Step 0: Install CLI

Install the fractal CLI from PyPI if fractal is not already on your PATH. fractal shells out to the wiki command, so install both:

pipx install plasma-fractal
pipx install plasma-wiki

(uv tool install plasma-fractal --with-executables-from plasma-wiki does the same in one command.)

Users install with any manager (uv tool, pipx, pyenv, a project venv, system pip), so before installing, check what's already there by running it — fractal --version && wiki --version — never by name resolution alone: a pyenv shim for a non-activated env resolves on PATH but fails at exec. If a working install lives off PATH, use its absolute paths wherever this skill says fractal or wiki for the rest of the session. Only your own shell needs this care — fractal resolves its helper CLIs from its own installation, so node-side commands work regardless.

Step 1: Initialize

The node's <node_dir>/skills/fractal/SKILL.md documents spawn mechanics, child management, configuration, radio, and the full CLI in detail — read it for further context as needed.

Determine the node's state and proceed accordingly:

1. The directive asks to continue — the node already exists. Resolve its worktree and node directory from fractal node list --path=<path>, then skip the rest of this step (the repo and node are already set up — no init or commit).

2. No continue intent, but a node already exists for this path and name (check fractal node list --path=<path>) — ask the user what to do:

   • Continue — treat as case 1 (keep state, continue).
   • Reset — wipe and recreate: do case 3, adding --reset to fractal node init. --reset returns a stock empty node — memory, plans, steps, skills, and config are all wiped — so re-author NODE.md, steps, and skills (Step 2 onward) from scratch afterward.
   • Cancel — abort.

3. Otherwise, create the node. Commit fractal's own artifacts autonomously, without asking (every command here is idempotent, so re-runs are safe):

   1. fractal init <path> --agent=<agent> — writes the root node data (.fractal/) and project wiki (wiki/); a no-op if the root already exists (re-run to update the stored --agent). For a monorepo sub-project <path> these nest under it (<path>/.fractal/, <path>/wiki/), not the repo root. --agent sets the default agent that spawned nodes inherit; if the user didn't specify one, default to --agent=claude if you are Claude, --agent=codex if you are Codex, --agent=grok if you are Grok, --agent=opencode if you are opencode, or --agent=omp if you are Oh My Pi. --provider sets the default provider route the same way (e.g. openrouter routes claude or codex through OpenRouter on OPENROUTER_API_KEY; agents without routes ignore it, and omitting it means each agent's own endpoint). Route mechanics to know: an inherited route is cleared per node with fractal node config set provider=null; the key is captured into the node's tmux session at launch (tmux >= 3.2), so rotating it requires a node restart; routed spend is audited on the OpenRouter dashboard (the ledger records the local estimate).
   2. fractal commit "configure <current_branch>" --init — commits the project wiki on the user's base branch, so the node worktree branches from a committed tree (an uncommitted wiki is invisible to fractal node init).
   3. fractal node init <name> ... (add --reset for case 2's Reset) — creates the worktree and node directory. --agent is optional: when omitted, the node automatically inherits the user node's default (the agent set in step 1). Pass the parameters interpreted from the directive; if you intend to pass additional options, confirm with the user first. If it fails, stop and report the error.

The project wiki/ is git-tracked (as are node-branch seeds) — never add it to .gitignore. The root node's own .fractal/ is git-ignored on the top-level branch by default, keeping it out of your main history; run fractal track to commit it there too and fractal untrack to revert — both toggle only the ignore and print the follow-up git command, never touching the index. Fractal manages this — its runtime artifacts (worktrees, the central database, status, agent logs) plus the top-level .fractal/ — via the repo-local .git/info/exclude, which it writes automatically; it never touches the committed .gitignore. Keep your own ignore patterns anchored (/artifacts/, not artifacts/), or they also match — and silently hide — same-named subtrees at any depth, such as a node's committable .fractal/<node>/artifacts/.

fractal init also wires the wiki merge driver: the committed .gitattributes assigns merge=wiki to the generated wiki _index.md files, while the driver itself lives in repo-local git config, so merges of branches carrying wiki pages auto-resolve the generated index sections. Local config does not survive a clone — on a fresh clone the attribute is present but the driver is not, and _index.md merges fall back to git's default and may conflict on generated content; re-running fractal init registers it (verify with git config --get merge.wiki.driver).

The output includes the project directory (worktree root) and the node data directory. Read these from the output to use in later steps (e.g. <node_dir>/NODE.md).

If the output includes Obsidian plugin instructions, relay them to the user — installing the listed plugin(s) and running wiki config --path=<path> on the project wiki (wiki/) or memory wiki (<node_dir>/memory) lets them browse in Obsidian (optional).

Step 2: Define the node

If continuing an existing node, it is already defined from its previous run. Ask the user whether to keep that definition as-is (proceed to next step) or update it — revisit the relevant topics below to adjust goals, completion requirements, rules, budget, or steps before relaunching.

Have a conversation with the user to define what this node should do. Work through each topic below in order. Ask questions naturally — do not dump all topics at once. Wait for the user's response to each before moving on.

a) Goals and instructions. Start from the suggested instructions printed when you read the directive (or the user's answer to your closing question when no draft was printed) and ask the user what to refine. Draw out specifics: what area of the codebase, what kind of work, any constraints or preferences. Node configuration is the highest-leverage work — a well-configured node runs autonomously for hours; a vague one burns budget. Push for specific, verifiable goals rather than transcribing broad statements. Write the result into the ## Instructions section of <node_dir>/NODE.md.

b) Completion requirements. Start from the suggested completion requirement printed when you read the directive (or the user's answer to your closing question when no draft was printed) and ask how the user will know the node is done. Help them articulate concrete, verifiable conditions. If the work is open-ended with no natural stopping point, suggest leaving this section empty and using --max-iters to cap the run. Write the result into the ## Completion Requirements section of <node_dir>/NODE.md.

c) Rules and constraints. Ask if there are any additional rules beyond the defaults — files or directories to avoid, patterns to follow, tools to use or skip, style preferences. If the user has additions, append them to the ## Rules section. If not, move on.

d) Budget and scope. Ask about cost limits (--max-cost caps each run — runs are isolated — --max-iter-cost caps per-iteration). --max-cost is optional but strongly recommended: without it the node runs uncapped — a warning at start, bounded only by --max-iters/--timeout — so settle on a cap unless the user deliberately wants an uncapped run, confirmed explicitly: before launching any uncapped node, ask an are-you-sure and get a yes (a user's explicit uncapped request in this conversation counts) — never default into uncapped. Also recommend --max-iter-cost. If the node should only touch certain files or directories, ask about --scope (restricts what the node can commit). For open-ended work with no completion requirements, suggest --max-iters to cap iterations.

[!WARNING] A low --max-cost paired with an expensive --model is the combination most likely to overshoot the budget by a large percentage. The run-level ceiling is soft and only checked between steps, so a single step costing a big fraction of — or more than — the whole budget overshoots before the next check runs. claude caps each step with a hard per-step budget (limiting the overshoot, but truncating work when the budget is tiny); codex has no per-step cap, so its overshoot is bounded only by --step-timeout. For a small budget, prefer a cheaper --model and set --max-iter-cost; reserve expensive models for budgets large enough that one step is a small slice. The sizing floor: never set --max-cost (or a remaining grant) within ~2x the model's single-turn cost — a cap inside that band can be overshot by a large fraction in one turn, and that overshoot is documented, accepted behavior: no enforcement absorbs it.

Model-choice economics under a budget — when a cheaper model at the same dollar cap is the right call, and which roles keep frontier models — are covered in the node skill's Cost section.

When spawning runs whose outputs will be compared (A/B arms, benchmark variants), fork them from one pinned tip and declare the endowment in each run's config commit: the tip sha plus the baseline figures the comparison will read against. Comparisons read against the declared baseline, never against stale round figures.

e) Remote pushing. Nodes push their branch to origin after each commit by default; --local keeps commits local. Err on the side of --local: pass it unless the user has made it clear they want commits pushed to the remote. With no remote the push is skipped automatically, so move on.

f) Iteration steps. Briefly explain how each iteration works: sync runs automatically before each numbered step to handle radio communication (inbox, feed, parent directives), then the step itself executes. The default steps are prepare, plan, execute, review, and commit — but steps can be added, removed, or replaced by editing <node_dir>/steps/. Ask if the user wants to modify them. Most users keep the defaults. Sync is itself a billed step — it runs once per numbered step (its prompt comes from modes/SYNC.md, which is not listed in steps/), so an iteration with N step files actually runs ~2N agent invocations and a budget sized by counting steps/ undercounts (roughly the per-sync cost × N per iteration). Sync can be disabled with --no-sync for lightweight leaf nodes. A step may carry YAML frontmatter: agent: <command> runs that step on a different agent (each agent keeps its own woven session across the steps that use it), provider: <route> overrides the provider route (agents without routes ignore it), model: <name> overrides the model for that step, effort: <level> overrides the reasoning effort, timeout: <duration> overrides the node-global step_timeout for that step alone, detached: true isolates a single step in its own session within a continuous node, and requires_approval: true holds the loop after the step completes until the operator approves it (fractal node pending/approve).

g) Environment setup. Ask if the project needs environment preparation (virtual environments, dependencies, containers, build steps). If so, edit <node_dir>/scripts/setup.sh. It runs automatically at the start of every iteration and must be idempotent.

h) Validation and testing. Mention that <node_dir>/scripts/lint.sh runs before each commit, and <node_dir>/scripts/test.sh is called by the agent during execution. Ask if the user wants to configure either.

i) Review. Once all sections are defined, print the final contents of <node_dir>/NODE.md so the user can review it. Ask if anything needs adjustment. Iterate until the user is satisfied.

Step 3: Launch

Print the exact commands you are about to run, then ask the user to choose:

• Launch — commit the seed and start the node.
• Revise — adjust the node's definition or options first, then re-confirm.
• Cancel — do not launch.

Only proceed if Launch is explicitly chosen.

Once launch is approved, commit the configured seed and start the node from the worktree — fractal commands act on the node in the current directory, so no path is needed:

cd <worktree>  # .worktrees/<branch>
fractal commit "configure <name>" --init
fractal node start

When the project runs a markdown formatter hook, expect fractal commit --init to refuse if the hook rewrites a seed file at all — seed pages are guarded byte-for-byte, and only wiki pages get the structure-preserving auto-retry; follow the error's remediation. Never run project format hooks over .fractal/ seed files yourself: step frontmatter (requires_approval:, agent:, timeout:, ...) is load-bearing, a generic mdformat destroys it, and pre-commit run --files reports success on untracked files even while rewriting them.

All run parameters were set at init (in config.json); start takes no config arguments — only --continue (plus --clean to discard uncommitted project files, and --max-cost to re-arm the cap after a budget-ended run) when continuing a stopped/exited node. If the user wants to tweak a setting first, edit <node_dir>/config.json, then start. The node launches in a detached tmux session.

Step 4: Post-launch briefing

Once the node is running, briefly explain how to interact with it:

• Steering: Edit <node_dir>/NODE.md directly to adjust goals, rules, or instructions. The node reads it fresh at every step. Retune caps with fractal node update — it updates the registry row and the child's config.json together, and a running loop picks the change up at its next iteration boundary (a direct config edit is honored at the same boundary but leaves the registry stale until the loop heals it).
• Monitoring: From the node's worktree (cd <worktree>), commands act on it directly — fractal node status, fractal node cost spent, and fractal node attach (watch live output — use this, not raw tmux -t, whose prefix matching can attach the wrong session). fractal node list shows this node's subtree (from a leaf worktree, just its own descendants) — run it from the repo root to see the whole tree; it lists live nodes only (--all includes retired ones, --retired only those). Read <node_dir>/memory/ (knowledge) or <node_dir>/plans/ (plans). A run that ends completed after --max-iters only means the iteration budget was exhausted, not that the goal was met — check fractal node activity for the per-iteration outcomes. Figure scopes differ by design: cost spent reads the run's full subtree (children included), while activity's cost column sums only the node's own steps — and both are per-run, with no lifetime rollup.
• TUI: For a live view of the whole tree — nodes, runs, costs, and output — suggest the user open the dashboard with fractal open (run from the repo root).
• Stopping: From the worktree, three escalation levels:
  • fractal node finish — stop after current iteration
  • fractal node stop — stop after current step
  • fractal node kill — kill immediately
• Pausing: fractal node pause freezes the subtree in place — it aborts each in-flight agent turn and parks every loop with its run open — and fractal node resume relaunches it exactly there (same budgets, same iteration, the interrupted step's session continued when possible). Tree-wide, fractal pause / fractal resume (from anywhere in the repo) brake and release the whole tree; the brake also latches every new node init/start — new top-level nodes included — until fractal resume lifts it (a subtree fractal node resume under a paused ancestor or a tree-wide brake refuses — the brake holds until fractal resume). Paused state is durable: it survives a reboot or a filesystem copy of the repo to another machine. A paused node holds its spawn slot and blocks its parent's finish-drain; only resume, kill, and chat act on it (ask a paused node what it was doing — chat --current forks the interrupted claude, grok, opencode, or omp session, and the TUI's chat does so by default; a codex node gets a fresh session). Note the distinction: resume continues a paused run in place, while start --continue opens a fresh run (worktree restored — uncommitted project files need --clean, and a budget-ended run refuses without an explicit --max-cost) on a stopped/exited node.
• Worktree: The node runs in a git worktree at <repo>/.worktrees/<branch>/. The user's repo is untouched. When done, from the repo root, merge with fractal node merge <branch>. Deleting afterward with fractal node delete <branch> is optional hygiene, never automatic — a merged branch keeps audit value (delete must run from outside the worktree). Delete is destructive: it is recursive — removing the node's whole subtree — and force-removes each worktree and force-deletes the branch(es) regardless of merge state, so any committed-but-unmerged work is lost. Always confirm the merge succeeded first (check its output). To keep a node's branch while hiding it, retire it instead. Delete prompts for confirmation [y/N]; pass --force/-f to skip the prompt.
• Reset: fractal reset (from anywhere in the repo) tears down every node worktree, branch, and registration in one sweep; the project, wiki, and all history in the central database survive, so fresh nodes spawn immediately after. It refuses while any node is running or paused, and prompts [y/N] (--force/-f skips).
• Radio: nodes communicate via fractal radio commands. radio send writes any channel permissions allow, given at least one routing dimension (--node/--parent or --channel) — a fully bare send refuses; radio post is the quiet reporting verb for publicly readable channels (outbox, public), and a bare post lands in your own outbox. The listings (messages/feed) show metadata and never touch read state; radio read prints full bodies and writes your read receipts. Replies route to the counterparty's inbox — a feed (outbox) post is never replyable in place. Run fractal radio --help to explore.

Offer to help the user edit NODE.md, check progress, or read plan files.

Operator

After launch a node runs autonomously — but the user (root) node never does: it is a passive database with no loop, the human's anchor at the root of the tree ("user": true; never started, merged, or deleted). Every other node runs its own loop; the root has none, so you are the operator. Once the tree is running you are the operator — you do for the root what the loop does for every node, except your parent is the user and your task is their intent. Run like the loop you are: don't wait to be asked. Lead with a monitoring pass, keep a standing watch where your environment allows recurring checks, and act with full autonomy on the user's behalf — steer, finish/stop/kill, merge, spawn — reporting what you did rather than asking first. Pause only for genuinely ambiguous or irreversible calls, and narrow the moment the user scopes you back.

Work the tree through the CLI — run it from the repo root, or name a branch positionally. Monitor with fractal node list/status/activity/cost, and chat <branch> "<q>" --current to ask a running agent without disrupting its loop — --current forks the live loop session (claude, grok, opencode, or omp); for codex nodes ask via a fresh chat (omit --current) or continue one in place with --session ... --resume. The root auto-subscribes to its children's outbox but has no auto-sync, so poll its radio yourself — fractal radio read --channel=inbox --unread (its inbox) and read --feed --unread (children, one hop); the messages/feed listings survey metadata without consuming unread state, and your reads receipt as you, the reader — send directives to a child's inbox (radio send <message> --node=<branch> ...), and send-and-continue (a node sees you only on its next sync). Steer by editing NODE.md files (re-read each step) or by radio; approve gates (node pending/approve), retune limits (node update), and merge finished subtrees (deleting after merge is optional hygiene, not a default). Relay both ways: surface progress, blockers, and cost up to the user, and translate their intent down into edits, directives, and spawns. Ask the user for input and feedback freely, but never let a question block you unless it is absolutely critical — proceed on your best judgment, make reversible calls, and note them.

Commissioning

When a child's launch deserves review before it burns budget, separate init from start and put a countersign between them. The gate is social — nothing in the tool enforces it — but it catches seed mistakes while they are still free to fix:

1. Commission — init the child and author its seed (NODE.md, caps, steps), but do not start it.
2. Pin the seed — commit the configured seed (fractal commit "configure <name>" --init from the child's worktree) and record the pin: the child branch's seed commit sha plus a checklist of what was reviewed (NODE.md, caps, steps).
3. Request countersign — send the pin and checklist over radio to the designated reviewer (an ancestor or a named reviewer node) and wait for the reply.
4. Start only on countersign — launch the child only after the countersign reply. A child whose branch has moved past the pinned sha is stale: re-commission (re-review, re-pin) before starting.

CLI reference

Run fractal --help and fractal <command> --help for all commands and options. Commands act on the node in the current directory by default, so cd into a worktree to operate on it; to act on another node from elsewhere in the repo, name its branch positionally (e.g. fractal node status <branch>). --path is an escape hatch for running from outside a worktree. fractal node init is the exception: <name> plus the project root via --path.

Nodes spawn their own children — the running loop sets the _NODE environment that makes fractal node init nest the child under the calling node. Running it by hand from inside a worktree without that env nests under the repo-root user node instead, so operators normally don't spawn children manually.