exploration-workflow

name	exploration-workflow
description	SME-facing orchestrator for the Business Exploration Loop. Supports 4 session types (greenfield, brownfield, discovery-only, spike) with adaptive phase selection. Manages state via exploration-dashboard.md, enforces phase gates, and routes to child skills in sequence. Phases can be skipped based on session type. Single canonical entry point — invoke at the start of any exploration session or to resume an in-progress session. Trigger phrases: "start an exploration", "let's explore this idea", "resume my exploration", "where did we leave off", "start discovery".
allowed-tools	Read, Write

SME starts a brand-new exploration session from scratch. user: "Let's explore this idea I have for a staff scheduling tool." agent: [invokes exploration-workflow, bootstraps dashboard, asks for session type, begins Phase 1 discovery-planning] SME resumes an in-progress session after prior work. user: "Where did we leave off with the customer portal exploration?" agent: [invokes exploration-workflow, reads dashboard, presents status summary, routes to active phase] Negative — user wants to start a new discovery plan only, not the full workflow. user: "Run a discovery planning session for my onboarding redesign." agent: [invokes discovery-planning directly, NOT exploration-workflow]

Exploration Workflow — SME Orchestrator

This skill is the single canonical entry point for the Business Exploration Loop. It manages all session state via exploration-dashboard.md, enforces phase gates, and routes work to the correct child skill at each phase. The SME never needs to invoke any other skill directly.

Session Types

The workflow adapts to four session types, each with different phase requirements:

Type	When to use	Active Phases
Greenfield	Building a new app or system from scratch	All 4 phases
Brownfield	Adding a feature to an existing codebase	Phase 1 required, Phases 2 & 4 optional, Phase 3 builds into real codebase
Analysis/Docs	Non-software output: requirements, process maps, legacy code analysis, policy, strategy, workflow design	Phases 1 & 4 required, Phase 2 optional (structure not layout), Phase 3 skipped
Spike	Investigating a question or technology	Phase 1 required (may repeat), all others flexible

---

Execution Disciplines (powered by orba/superpowers)

Required dependency: The orba/superpowers plugin MUST be installed alongside this plugin. See the plugin README for installation instructions.

When Phase 3 is active, read references/phase3-execution-discipline.md for the full execution discipline protocol (superpowers availability check, worktree isolation, build delegation, TDD validation, branch finishing).

Summary: The orchestrator sets up isolation (worktrees), then delegates all build work to subagent-driven-prototyping. That skill owns component decomposition, dispatch, two-stage review, and TDD. When it signals complete, the orchestrator invokes finishing-a-development-branch for merge/PR options.

---

Block 0 — Pre-Flight & Dispatch Strategy (ask once during bootstrap)

Dispatch strategy details: references/dispatch-strategies.md Environment check: references/environment-check.md

Run the environment check silently first (see references/environment-check.md). Only surface results if something is missing or needs a fallback. Do not mention the check to the SME unless action is needed.

For Analysis/Docs sessions: Skip the dispatch strategy question. Default to direct.

Token Efficiency — Claude-only sessions

If the SME has no Copilot or Gemini CLI (strategy = claude-subagents or direct), apply these practices throughout:

• Simple capture passes (template filling, document extraction, format conversion): use the Agent tool with model: "haiku" (currently haiku-4.5) to keep the main context light.
• Q&A clarification: batch 3–5 questions, dispatch haiku to collect structured answers, write to exploration/captures/clarifications-[topic].md, read back once. Never run clarification loops inline in the main orchestrator turn.
• Compact before topic switches: if the session moves from one major phase to the next and earlier content is no longer needed, use /compact to reduce carry-forward context debt.
• Full details and Claude Code dispatch examples: references/dispatch-strategies.md.

For all other session types, ask the SME after session type selection:

"One more thing — how should I handle the heavy lifting when we get to building?

1. I have GitHub Copilot Pro — I'll use Copilot CLI. Simple tasks use gpt-5-mini (free). Complex tasks use claude-sonnet-4-6 or claude-opus-4-6 (1 premium request — all related tasks batched into one dense call).
2. I have Gemini CLI — Simple tasks use gemini-3.1-flash-lite-preview (cheap). Complex tasks use gemini-3.1-pro-preview.
3. Claude only — I'll use Claude sub-agents. Simple tasks use haiku-4.5 (cheapest). Complex tasks use sonnet.
4. I'll handle it myself — Everything happens directly in this session."

Record the choice in the dashboard as **Dispatch Strategy:** (copilot-cli, claude-subagents, or direct).

Fallback: If the chosen strategy becomes unavailable during Phase 3, silently fall back to direct mode and inform the SME.

---

Early Exit — Kill Session

At any point during the exploration, if the SME says something like "this isn't going to work", "kill it", "let's stop", or "the idea is bad", the workflow should exit cleanly:

1. Ask: "Got it — should I close the session? I'll save what we learned so it's not lost."
2. On confirmation, write a brief exploration/handoffs/handoff-package.md with:
   • What was explored
   • What was learned
   • Why the session was stopped
   • A ## Risk Assessment section containing: **Outcome:** Throwaway (Fail Fast) / **Reason:** [one sentence from SME] / **Delivery Path:** Session closed — learning preserved.
3. Mark all remaining phases as [~] (skipped) with note: (Session killed — fail fast)
4. Update **Status:** to Complete
5. Announce: "Session closed. The learning is saved in exploration/handoffs/. Failing fast and cheap is a valid outcome — you saved weeks of wasted effort."

This is the "Throwaway Prototype" outcome from the TierGate — it can happen at any phase, not just at handoff. The earlier it happens, the more valuable it is.

---

Block 1 — Bootstrap (run silently before speaking to the SME)

1. Check for exploration/exploration-dashboard.md.
2. If the file does NOT exist:
   • Create the exploration/ directory if it does not already exist.
   • Beat 1 — Name and goal: Ask:

     "What are we exploring today? Give it a short name so we can track it — and in a sentence or two, what are you hoping to achieve or solve?"

   • When the SME responds, immediately write a provisional dashboard with **Session:** set and **Session Type:** TBD. This anchors the session name before classification.
   • Beat 2 — Session type: Using the Scenario Routing Guide below, suggest a type with a one-sentence rationale:

     "That sounds like [Type X] — [why]. Does that fit, or would you describe it differently?"

   • If the SME confirms: proceed with that type.
   • If the SME corrects or says "not quite": take their word for it. Always defer to SME judgment.
   • If the SME says "I'm not sure" or "you tell me": present the full type menu (see below) with examples.
   • Update **Session Type:** in the dashboard to the confirmed type.
   • Immediately pre-mark non-applicable phases as - [~] based on the confirmed session type. Use the Active Phases table in the Session Types section above to determine which phases to skip. Add a parenthetical reason: (Skipped — [reason]). Do this before finalizing the dashboard — the SME should never see a phase as "upcoming" if this session type will never use it.
   • Write the final dashboard, then proceed to Block 3.
3. If the file EXISTS: Proceed to Block 2.

---

Scenario Routing Guide (for agent use — do NOT recite to SME)

Match on intent, not keywords. When uncertain, default to the type with more phases (easier to skip phases than to add them back).

What the SME describes	Suggested type	Key signal
Net-new app, portal, tool, system from scratch	Type 1 (Greenfield)	Nothing exists yet
New website (product site, marketing site, customer portal)	Type 1 (Greenfield)	Treat as greenfield even if using a CMS
Automated workflow, approval bot, notification system, integration	Type 1 (Greenfield)	New software, but ask: "Is the current manual process documented?" — if not, open with Analysis/Docs first
Add a feature or fix something in an existing app/codebase	Type 2 (Brownfield — feature addition)	Working codebase exists
Understand, document, or analyse an existing/legacy system	Type 2 (Brownfield — legacy analysis)	See Legacy Analysis sub-type below
Modernise, replatform, or migrate a legacy system	Type 2 (Brownfield — legacy analysis) → handoff to engineering	Start with analysis to understand what exists before planning the rebuild
Fix a broken business process, improve a workflow	Type 3 (Analysis/Docs — process) — but run Intervention Check first	Often NOT a software problem
Requirements gathering or documenting for an upcoming project	Type 3 (Analysis/Docs — requirements)	Deliverable is documents
Strategic planning, market entry, go-to-market, business decision	Type 3 (Analysis/Docs — strategic)	No code output
Policy, compliance, regulatory, risk assessment	Type 3 (Analysis/Docs — risk/compliance)	Deliverable is policy or risk doc
Should we build vs. buy? What are our options?	Type 4 (Spike)	Decision support, may not lead to building
I'm not sure if we even need software	Type 4 (Spike) or start Phase 1 directly — the Intervention Check will clarify	Do not force a type prematurely
Research a technology, validate a hypothesis	Type 4 (Spike)	Exploratory, outcome open

"Not sure if software is the answer" path:

"That's actually the most important question — let's not assume software is the answer yet. Let's start with Phase 1 and figure out what kind of solution actually fits. I'll ask a specific question about that during our planning conversation." Use Type 4 (Spike). The Intervention Check in Phase 1 will resolve this cleanly.

---

Session Type Templates

Type 1 — Greenfield (new app, system, or website): All 4 phases enabled.

Phase notes:

• Phase 2 (Visual Blueprinting): always run for software and websites. For websites: present page structure and layout options, not just UI widgets.
• Phase 3: builds a working prototype. For websites: focus on content structure, navigation, and one representative page before building all pages.
• Phase 4: required — produces handoff package with risk assessment.

Type 2 — Brownfield: Two distinct sub-types with different phase configurations:

Sub-type A — Feature addition or improvement:

• Phase 1: enabled
• Phase 2: optional — ask: "Does this feature need a layout discussion, or is the design straightforward enough to skip?"
• Phase 3: enabled — builds into the existing codebase directly (not a throwaway prototype)
• Phase 4: optional — ask: "Are you handing this off to someone else, or building it yourself?"

Sub-type B — Legacy analysis / modernisation / replatforming:

• Phase 1: enabled — problem framing focuses on "what does the current system do?" rather than "what do we want to build?"
• Phase 2: optional — use for architecture diagrams or migration maps if helpful
• Phase 3: disabled — this is an analysis session, not a build session. Output is documentation and a modernisation plan.
• Phase 4: enabled and required — the handoff IS the deliverable, typically a modernisation spec for a formal engineering team.

Record the sub-type in the dashboard under **Session Type:** (e.g., Brownfield — legacy analysis).

Type 3 — Analysis or documentation: Phase 1: enabled. Phase 2: optional — reframed as Structure Mapping (not "Visual Blueprinting"). Offer it proactively: "Before we start capturing, would it help to sketch out what the final document should look like? I can show you a few structure options." If yes, invoke visual-companion in document-structure mode (process flow diagrams, document outlines, decision trees, swimlanes). Output goes to exploration/captures/document-structure.md. Phase 3: disabled. Phase 4: enabled — the handoff IS the primary output.

Sub-types (record in dashboard):

• Process: Fix or improve a business workflow. Deliverable: process documentation + change recommendations.
• Requirements: Capture requirements for an upcoming project. Deliverable: BRD / user stories / acceptance criteria.
• Strategic: Plans, decisions, market analysis. Deliverable: strategic recommendation document.
• Risk/Compliance: Policy, regulatory, or security requirements. Deliverable: risk assessment or policy document.
• Legacy analysis: Document an existing system from the outside (no code access). Deliverable: system analysis report.

Note: for Process sub-type, flag to discovery-planning that the Intervention Check is especially important — this is the scenario most likely to reveal that software is NOT the right answer.

Type 4 — Spike or investigation: Phase 1: enabled, may repeat. Phases 2–4: flexible — the SME decides as the investigation unfolds. Use when the outcome is unclear, when decision support is needed, or when "I'm not sure if we need software."

For skipped phases, mark them - [~] in the dashboard and add a note: (Skipped — [reason]).

---

Block 2 — Read State (run silently)

1. Read exploration/exploration-dashboard.md.
2. Check session status first: If the dashboard contains **Status:** Complete, skip directly to the Completion Block. The session is already finished.
3. Identify the active phase using these explicit parsing rules:
   • - [x] or - [X] (case-insensitive) → phase is complete
   • - [~] → phase is intentionally skipped (treat as complete for routing purposes, but do not verify outcome files)
   • - [ ] (exactly one space between brackets) → phase is incomplete
   • The active phase is the first incomplete phase in the numbered list (skipping over [~] phases).
   • Malformed checkboxes (e.g., -[x] with no leading space, * [x] with asterisk, –[ ] with an em-dash) must NOT be silently mis-routed. If you encounter one, pause and tell the user:

     "The session dashboard has a formatting issue on one of the phase checkboxes. Let me show you so we can quickly confirm where we are." Display the raw affected line(s) and ask: "Is this phase complete or still in progress?" Correct the checkbox before continuing.

4. For every complete phase (excluding skipped [~] phases), verify that its listed Outcome file exists on disk.
   • If an Outcome file is missing for a completed phase, stop and say:

     "It looks like [Phase N] was marked complete but I can't find the expected output file at [path]. Let's take a quick look before continuing."

   • Do not advance to Block 3 until this is resolved.
5. Proceed to Block 3.

---

Block 3 — Orientation Summary (always shown to the SME)

Present a brief, friendly status message based on the dashboard state.

For a brand-new session (just bootstrapped):

"Great — we're all set up. We'll work through [N active phases] together, starting with Problem Framing. Ready to begin?"

If any phases were skipped during bootstrap, mention it naturally:

"We've skipped [Phase N] since [reason]. If that changes, we can always add it back."

For a mid-session resume (at least one phase complete):

"Welcome back! Here's where we are: [List each phase with ✅ if [x] complete, ⏭️ if [~] skipped, or 🔵 if it is the active phase]

Ready to pick up where we left off with [active phase name]?"

Wait for a soft confirmation before proceeding. Any clear affirmation counts: "Yes", "Let's go", "Go ahead", "Ready", "Sure". Do not proceed until received.

---

Block 4 — Phase Routing

Identify the active phase (first incomplete phase that is not skipped).

Skipped phases (- [~]) are not active — skip over them when finding the next phase to route to.

Route to the child skill for the active phase:

Active Phase	Child Skill to Invoke
Phase 1 — Problem Framing	discovery-planning
Phase 2 — Visual Blueprinting	visual-companion
Phase 3 — Build	subagent-driven-prototyping
Phase 4 — Handoff & Specs (Auto-runs User Stories & Specs)	exploration-handoff
All phases complete or skipped	→ Completion Block

When invoking a child skill, pass this structured context block — do NOT bury it in prose:

## Session Context (from orchestrator — read and act on before proceeding)
- Session type: [exact value from **Session Type:** in dashboard]
- Active phase: Phase [N] — [phase name]
- Discovery Plan: [path to most recent discovery-plan-*.md, or "not yet written"]
- Dispatch strategy: [value from **Dispatch Strategy:** in dashboard]
- Return signal: When this phase is complete, announce "PHASE [N] COMPLETE" then invoke the exploration-workflow skill to continue.

Child skills must read Session type and adapt their question tracks and outputs accordingly before doing anything else.

---

Mid-Session Revision Protocol

If the SME asks to go back and change something in a completed phase (e.g., "Can we revisit the discovery plan?", "I want to change who the users are"), follow this protocol:

1. Identify what changed. Ask one clarifying question: "What specifically needs to change — the problem statement, the users, the constraints, or something else?"

2. Assess downstream impact. Before reopening anything, tell the SME what would need to be redone:

   "If we change [X], it affects [Y]. Here's what we'd need to redo: [list affected phases/outputs]."

3. Get confirmation. "Should I go ahead and reopen Phase [N], knowing that [downstream impact]?" Wait for a clear yes.

4. On confirmation:

   • In the dashboard, change the affected phase's - [x] back to - [↩] (marks it as revised, not just incomplete).
   • Clear the Outcome file path note for that phase (set to TBD).
   • Re-invoke the child skill with the existing context as starting point, not a blank restart. Pass the prior output as: "Here's what we had — the SME wants to change [specific thing]. Update accordingly."

5. After revision is approved, restore the dashboard to - [x], update the Outcome file path, and log the revision in the Session Log with a note: (revised — [one-sentence reason).

The ↩ marker signals that this phase was completed, revised, and re-completed. It is distinct from [x] (complete), [ ] (not started), and [~] (skipped). If your dashboard template does not include this marker, add it manually.

---

Block 5 — HARD-GATE (phase completion approval)

<HARD-GATE> — This block runs when the child skill signals its phase is done.

1. Present a plain-language summary of what was produced (1–3 bullets).
2. Show the SME the Outcome file path.
3. Ask for explicit approval:

   "Does everything look right? If you're happy with it, just say the word and I'll mark Phase [N] complete."

4. Do NOT update the dashboard until the SME gives a clear affirmation. Accepted responses: "Yes", "Looks good", "Approved", "Go ahead", "That's right", or any equivalent clear confirmation.
5. If the SME requests changes: return control to the child skill, apply changes, then re-present for approval. Repeat until satisfied.

---

Block 6 — Dashboard Write (runs after HARD-GATE approval)

Using the Write tool, update exploration/exploration-dashboard.md:

1. Change - [ ] to - [x] for the now-completed phase.
2. Update **Current Phase:** to the name of the next phase, or to Complete if Phase 4 was just finished.
3. Update **Status:** to In Progress (or Complete if all phases are done).
4. In the Session Log table, fill in the completed phase row with today's date and a one-sentence note describing what was produced.

Then loop back to Block 3 to orient the SME for the next phase.

---

Completion Block

When all phases are either marked [x] (complete) or [~] (skipped):

Spike re-entry check: For spike sessions, before declaring completion, ask the SME: "You've completed this round of investigation. Would you like to loop back to Phase 1 with what you've learned, or are we done?"

If they want to loop:

1. Archive the current discovery plan: rename exploration/discovery-plans/discovery-plan-YYYY-MM-DD.md to discovery-plan-YYYY-MM-DD-v[N].md where N is the iteration number.
2. Clear the Phase 1 Outcome file path in the dashboard (set to TBD).
3. Reset Phase 1 to - [ ] in the dashboard.
4. Add a note in the Session Log: (Spike re-entry — iteration [N] — prior plan archived as [filename]).
5. Return to Block 3.

If they're done, proceed with completion below.

"Congratulations — your Exploration Session is complete! All phases are finished and your outputs are ready. Your exploration outputs are in the exploration/ folder."

If Phase 4 was skipped (brownfield self-build):

"Since you built this directly, you're already in Engineering mode. Your build documentation is at exploration/prototype/README.md."

If Phase 4 produced a handoff package, the completion message depends on the Risk Tier and session type recorded in the handoff:

Tier	Completion Message
Tier 1 (Low Risk)	"Your handoff assessed this as low risk. You're clear to deploy directly — no formal engineering cycle needed. Your build documentation and handoff are in exploration/."
Tier 2 (Moderate Risk)	"Your handoff assessed this as moderate risk. Before deploying, this needs a security review and red team assessment. Hand the file at exploration/handoffs/handoff-package.md to your security team."
Tier 3 (High Risk)	"Your handoff assessed this as high risk. The next step is a formal engineering cycle. Hand the package at exploration/handoffs/handoff-package.md to your development team — it includes the requirements, user stories, business rules, prototype notes, and risk assessment they need to begin a spec-driven build."
Non-software outcome	"The exploration concluded that the right solution here isn't a new system — it's a [process change / policy update / strategic recommendation]. Your recommendation document is at exploration/handoffs/handoff-package.md. Hand it to the team or person responsible for [implementing the change]."
Legacy analysis complete	"The analysis is done. Your modernisation plan is at exploration/handoffs/handoff-package.md. This is the input your engineering team needs to scope the replatforming project — hand it to them to begin formal planning."
Throwaway / Fail Fast	"The exploration revealed this idea isn't viable — and that's a valuable outcome. You discovered this at near-zero cost instead of months into a build. The session artifacts are preserved in exploration/ for reference."

If no tier is recorded in the handoff, default to the Tier 3 message (safest path).

Non-software and legacy analysis sessions: check the session type in the dashboard. If **Session Type:** contains "process", "strategic", "risk/compliance", or "legacy analysis", use the matching non-software or legacy analysis completion message above, regardless of tier.

Update **Status:** to Complete in the dashboard.