install

name

install

description

Run `helm install` (or `helm upgrade --install`) for the LlamaCloud chart, monitor the rollout in real time, surface failing pods immediately, and capture a diagnostic bundle if anything fails. Use when the user says "install the chart", "run helm install", "deploy llamacloud", "upgrade", or naturally follows a successful preinstall-check. Runs with `--wait --timeout` and intentionally **does not** pass `--atomic`, so failed pods remain in place for the `debug` skill to investigate. Read-only against the cluster except for the helm install itself.

Install the LlamaCloud Helm chart

Goal: take the user from a validated values.yaml to a healthy release, surface failures within seconds (not at the helm timeout), and produce a diagnostic bundle if the install fails so the user can hand it to LlamaIndex support without further debugging.

Pre-flight gate

Before touching anything, confirm:

1. A recent preinstall-report.md exists next to the values file and ends in READY TO INSTALL. If not, refuse and direct the user to run the preinstall-check skill first. Customer installs that skip preinstall checks fail roughly an order of magnitude more often.
2. Re-confirm kubectl config current-context and pause for explicit approval. Yes, this is the second time today — confirm anyway.
3. Confirm the release name, namespace, chart version, and values file paths.
4. Confirm the install mode:
   • Fresh install → helm install <release> ...
   • Upgrade an existing release → helm upgrade --install <release> ... and warn that an upgrade may run database schema migrations. If downgrading, point at runbooks/downgrade.md and stop — downgrades require an extra manual schema step before the helm command.

Helm repo setup

If the user is installing from the published chart:

helm repo add llamaindex https://run-llama.github.io/helm-charts
helm repo update llamaindex
helm search repo llamaindex/llamacloud --versions | head -10

If installing from a local chart directory (e.g. testing a checkout), skip the repo dance and use the path directly. Confirm Chart.yaml is present and its version matches what the user expects.

The install command

Strong defaults — do not relax any of these without an explicit reason from the user:

helm upgrade --install <release> llamaindex/llamacloud \
  --version <chart-version> \
  --namespace <namespace> \
  --create-namespace \
  -f <values-file> \
  [-f <additional-values>] \
  --wait \
  --timeout 20m \
  --debug

Why each flag matters:

Flag	Why
--wait	Block until all Deployments / StatefulSets / Jobs report ready. Otherwise helm returns success the moment the API objects are created, before pods actually start.
--timeout 20m	LlamaCloud has 8+ Deployments plus optional Temporal + llama-agents subcharts. Database migrations can run for several minutes on a fresh install. 15m is too tight; 30m is fine if the user wants extra slack.
--debug	Streams template render details to stderr. Cheap insurance against silent template failures.

Do NOT use --atomic. It is tempting because it gives a clean "success or rolled-back" outcome, but on failure it deletes all the pods immediately — which destroys the evidence needed to diagnose what went wrong. Failed pods must stay in place so the debug skill (or the user / LlamaIndex support) can read their logs and events. The downside of leaving a failed release in place is recoverable: see "On failure" below for the manual cleanup path. Loss of debugging evidence is not.

Similarly, do NOT use --cleanup-on-fail for upgrades — same reason.

Run the install in the background so monitoring can run concurrently:

helm upgrade --install ... > /tmp/llamacloud-helm-install-$(date +%s).log 2>&1 &
HELM_PID=$!

Capture the PID. Tail the log periodically and surface salient lines.

Parallel monitoring loop

Goal: detect bad pods early so the user gets actionable feedback within seconds of a failure, not 20 minutes later when helm gives up. With --atomic removed, failing pods will remain in place after the timeout, but capturing logs continuously is still valuable — pods sometimes get evicted or restarted by the kubelet between failure and the user inspecting them, and kubectl logs --previous only goes back one container generation.

While the helm process is alive, every 10–15 seconds:

# Pod status table
kubectl get pods -n <ns> -o json | jq -r '
  .items[] | [
    .metadata.name,
    .status.phase,
    (.status.containerStatuses // [] | map(.ready) | all | tostring),
    (.status.containerStatuses // [] | map(.restartCount) | add // 0 | tostring),
    (.status.containerStatuses // [] | map(.state | keys[0]) | unique | join(","))
  ] | @tsv'

# Recent warning events
kubectl get events -n <ns> --field-selector type=Warning \
  --sort-by=.lastTimestamp -o json | jq -r '
  .items[-20:] | .[] | [.lastTimestamp, .involvedObject.kind, .involvedObject.name, .reason, .message] | @tsv'

Categorize each pod into:

• healthy — Running and all containers ready
• starting — Pending or container Waiting with reason ContainerCreating/PodInitializing and pod age < 90s
• stuck — Pending with reason FailedScheduling, or Waiting with reason in {ImagePullBackOff, ErrImagePull, CrashLoopBackOff, CreateContainerConfigError}, or Terminated with reason in {Error, OOMKilled, ContainerCannotRun}
• migrating — backend pod whose log lines indicate a schema migration is in progress (e.g. Running upgrade) — these can legitimately take minutes; do not flag as stuck on the basis of 0/1 Ready alone

For each pod that flips from starting to stuck, immediately and synchronously capture:

kubectl describe pod <pod> -n <ns> > /tmp/llamacloud-install-bundle/<pod>-describe.txt
kubectl logs <pod> -n <ns> --all-containers --tail=500 > /tmp/llamacloud-install-bundle/<pod>-logs.txt 2>&1
kubectl logs <pod> -n <ns> --all-containers --previous --tail=500 > /tmp/llamacloud-install-bundle/<pod>-logs-previous.txt 2>&1 || true

Surface a one-line summary to the user immediately:

⚠️ Pod llamacloud-7d8f-xyz (backend) entered CrashLoopBackOff. Last log line: ERROR: connection to server at "..." failed: Connection refused. Captured to /tmp/llamacloud-install-bundle/.

Do not auto-abort on the user's behalf. The pods stay put (because the install command does not pass --atomic), so the user has time to review. Offer to abort if the failure mode is one that won't self-resolve (e.g. ImagePullBackOff on a wrong tag) but let them decide.

Decision points during monitoring

While monitoring, you may need to surface options to the user:

1. Image pull stuck for >60s — capture diagnostics now and offer the user the option to abort (the failed pods will remain so the debug skill can investigate). Image pull issues will not self-resolve. Suggested abort sequence (only if the user agrees):

   • kill $HELM_PID to stop helm waiting
   • For a fresh install: helm uninstall <release> -n <ns> --keep-history (keeps history for inspection; pods are removed when the release is uninstalled, so capture logs first)
   • For an upgrade: leave the release in place; the previous revision is still active

2. Backend pod restarting >3 times with schema-migration error lines — migrations are failing. Capture, then advise the user to check whether their Postgres user has CREATE privileges on the database. Do not auto-abort; migrations on large databases can legitimately take time.

3. All pods Ready before timeout — wait for the helm process to exit with success. Do not declare success on pod readiness alone; helm's post-install Job hooks may still be running.

4. Helm exits with release "<name>" failed — pods remain in place. The debug skill takes over from here. Consolidate the diagnostic bundle and point the user at it.

On success

When the helm process exits 0:

helm status <release> -n <ns>
kubectl get all -n <ns>
kubectl get ingress -n <ns>

Report to the user:

• The release status and revision number from helm status.
• Pod-by-Deployment summary (ready/desired counts).
• How to reach the frontend:
  • If ingress.enabled: true, the configured ingress.host.
  • Otherwise: kubectl port-forward -n <ns> svc/llamacloud-web 3000:80 (Service is named llamacloud-web, port 80 → targetPort 3000; the user can then open http://localhost:3000).
• Suggest one smoke test: load the frontend URL in a browser, sign in via the configured OIDC provider, and confirm the dashboard renders. If anything breaks at this stage, route to the debug skill.
• Remind them to delete /tmp/llamacloud-helm-install-*.log if it contains anything sensitive (it should not, but check).

On failure

When helm exits non-zero (timeout, dependency failure, etc.) — pods remain in place. The user is in a position to debug or hand off to the debug skill.

1. Consolidate the diagnostic bundle. Final structure:

   /tmp/llamacloud-install-bundle/
     SUMMARY.md                 ← top-level, human-readable
     helm-install.log           ← stderr/stdout of the helm process
     helm-history.txt           ← `helm history <release> -n <ns>`
     events.txt                 ← `kubectl get events -n <ns> --sort-by=.lastTimestamp`
     pods.txt                   ← `kubectl get pods -n <ns> -o wide`
     <pod>-describe.txt         ← per-pod describes captured during monitoring
     <pod>-logs.txt             ← per-pod logs captured during monitoring
     <pod>-logs-previous.txt    ← per-pod previous-container logs
     values-resolved.yaml       ← `helm get values <release> -n <ns>` if release exists, with secrets masked
   

2. Write SUMMARY.md with:

   • Release / namespace / chart version / values files
   • Helm exit message
   • Top 3 most likely root causes, ranked, with concrete remediations
   • Pointer to the relevant examples/*.yaml for each remediation

3. Mask any secret in values-resolved.yaml. Use helm get values <release> -n <ns> -o yaml | yq and run a final regex sweep before writing. If unsure, mask.

4. Tell the user where the bundle is and what to do next:

   • The release is still in place. They can inspect pods with kubectl get pods, kubectl describe pod, kubectl logs --previous directly.
   • For structured triage, suggest the debug skill — it handles symptom-routing automatically.
   • When ready to retry: fix the root cause in values.yaml, then re-run this skill. Helm will detect the existing release and run an upgrade. If the release is in a stuck pending-install state, run helm uninstall <release> -n <ns> first (this WILL delete pods — capture anything you need first).
   • The bundle is shareable with LlamaIndex support after a final secret review.

Common install failures and what to look for

These are the highest-frequency failure signatures during a fresh install. When you see them, jump straight to the matching remediation.

ImagePullBackOff / ErrImagePull

• For docker.io/llamaindex/... images: usually Docker Hub anonymous pull rate limits. Suggest configuring imagePullSecrets with a Docker Hub PAT, or mirroring images to the customer's own registry. The shape is shown in examples/private-registry-config.yaml (note: this is an overlay file, layer it on top of basic-config.yaml with -f basic-config.yaml -f private-registry-config.yaml).
• For private-registry images: imagePullSecrets missing, or the secret exists but does not have auths.<registry> matching the image's registry host.
• For tags that don't exist: typo in appVersion or one of the <component>.image overrides.

CrashLoopBackOff on backend with connection refused / could not translate host name

• Postgres / MongoDB / RabbitMQ / Redis hostname doesn't resolve from inside the cluster, or the cluster security group is not in the inbound rules of the dependency. Re-run preinstall-check Phase 4 to verify routing. The fix is almost always a security group / NSG / firewall rule, not a values change.

CrashLoopBackOff on backend with License validation failed

• license.key is wrong, expired, or being read from a Secret that is empty / wrong key name. Confirm the value with the user (without echoing it).

CrashLoopBackOff on backend with Can't locate revision schema-migration error

• Postgres database state is ahead of the chart version (e.g. user attempted to install an older chart over a newer schema). Stop and route to runbooks/downgrade.md — this needs the manual schema-downgrade procedure before the install can proceed.

Pods stuck Pending with 0/N nodes available: insufficient cpu/memory

• Cluster is too small. Either scale up nodes, or reduce the chart's resource requests. Note that llamaParse and jobsWorker set requests == limits (Guaranteed QoS) so they can't be packed tightly.

Pods stuck Pending with 0/N nodes available: 1 node(s) had untolerated taint {nvidia.com/gpu: true}

• Inverted: the pod expects GPU but lacks the toleration, or vice versa. Check llamaParseOcr.tolerations and llamaParseLayoutDetection*.tolerations against the actual taints on the GPU nodes (kubectl get nodes -o json | jq '.items[].spec.taints').

Temporal subchart pods crashing

• Bundled deps left enabled. Confirm temporal-subchart.{cassandra,mysql,postgresql,elasticsearch,prometheus,grafana}.enabled: false.
• Postgres user lacks CREATE DATABASE privileges. Temporal's setup job creates temporal and temporal_visibility databases. Either grant the privilege or pre-create the databases and set temporal-subchart.schema.createDatabase.enabled: false.

Pods stuck Init:0/1 or Init:0/N

• An init container is waiting on an external dependency (DB, Temporal frontend, etc.) that's unreachable. kubectl logs <pod> -c <init-container> shows what it's waiting on; route to the matching connectivity pattern.
• If the customer runs a service mesh (Istio, Linkerd, Cilium, etc.) and the mesh's sidecar/init injection is broken, the pod's init can hang waiting for the mesh control plane. This is not a chart issue. The customer needs to fix their mesh, or remove mesh injection annotations from the affected component's *.podAnnotations until the mesh is healthy.

Critical rules

• Never use --atomic or --cleanup-on-fail. They roll back on failure, which deletes the pods. The user (or the debug skill) needs the failed pods in place to diagnose root cause. Loss of evidence is much more painful than a release left in a failed state — the latter is recoverable with a single helm uninstall once the user has finished debugging.
• Capture diagnostics during the install. The kubelet may restart pods between failure and inspection; kubectl logs --previous only goes back one container generation. The monitoring loop's captured logs are the canonical record.
• Mask secrets in the bundle. helm get values prints them in plaintext by default; do not write that to disk untouched.
• Stay read-only outside helm. No kubectl edit, no kubectl patch, no kubectl delete of customer resources during the install. Helm is the only mutator.
• One install at a time. If helm reports another operation (install/upgrade/rollback) is in progress, do not pass --force. Stop and figure out what the previous operation was doing.