project-setup

name	project-setup
description	Project configuration initialization. Use when: first-time setup, auto-detecting framework, replacing CLAUDE.md placeholders. Not for: ongoing config checks (use claude-health), skill creation (use skill-creator). Output: configured CLAUDE.md + project settings + rules + hooks.
allowed-tools	Read, Grep, Glob, Edit, Write, Bash(node:*), Bash(git:*), Bash(ls:*), Bash(mkdir:*), Bash(diff:*), Bash(chmod:*), Bash(jq:*), Bash(bash:*)

Project Setup

Trigger

• Keywords: project setup, init, initialize, configure project, setup CLAUDE.md, customize placeholders

When NOT to Use

• CLAUDE.md placeholders are already fully replaced (no {...} remaining)
• Non Node.js/TypeScript project without a recognized manifest file -- run with --detect-only to see what can be auto-detected. Manual configuration may be needed for: {FRAMEWORK}, {CONFIG_FILE}, {BOOTSTRAP_FILE}. Script commands ({TEST_COMMAND}, etc.) can often be detected from manifest files
• Only want to modify a single placeholder -- just Edit CLAUDE.md directly

Workflow

Phase 1: Detect project environment
    │
    ├─ Read package.json (dependencies, devDependencies, scripts)
    ├─ Detect lockfile (pnpm-lock.yaml / yarn.lock / package-lock.json)
    ├─ Detect entrypoints (glob src/)
    └─ Compile results
    │
Phase 2: Confirm detection results
    │
    ├─ Present detection results table
    └─ Wait for user confirmation or corrections
    │
Phase 3: Write to .claude/CLAUDE.md (unless --detect-only)
    │
    ├─ Read CLAUDE.template.md, filter ecosystem blocks
    └─ Replace placeholders, write to .claude/CLAUDE.md
    │
Phase 4: Verify CLAUDE.md
    │
    ├─ Read .claude/CLAUDE.md to confirm no remaining placeholders
    └─ Output placeholder summary
    │
Phase 5: Install Rules + Backfill CLAUDE.md (unless --no-rules or --lite)
    │
    ├─ Locate plugin rules dir (3-level fallback)
    ├─ mkdir -p .claude/rules/ → copy 13 managed rules + 2 override templates
    ├─ Backfill: ensure .claude/CLAUDE.md has @rules/ references
    └─ Output rules install report
    │
Phase 6: Install Hooks (unless --no-hooks or --lite)
    │
    ├─ Locate plugin hooks dir (3-level fallback)
    ├─ mkdir -p .claude/hooks/ → copy 6 hooks + chmod +x
    ├─ Merge hook definitions into .claude/settings.json
    └─ Output hooks install report
    │
Phase 6.5: Install Scripts (unless --lite or --detect-only)
    │
    ├─ Locate plugin scripts dir (3-level fallback)
    ├─ mkdir -p .claude/scripts/lib → copy 5 scripts
    ├─ Update manifest .sd0x/install-state.json
    └─ Output scripts install report
    │
Phase 6.7: Configure Environment Variables (unless --detect-only or --lite)
    │
    ├─ Detect model context size (1M → recommend auto-compact window)
    ├─ Build env var catalog (model-aware vars; flag retired STOP_GUARD_MODE for removal)
    ├─ Present recommendations, wait for user confirmation
    ├─ Merge into .claude/settings.json env object
    └─ Output env config report
    │
Phase 7: Final Verification Report
    │
    ├─ Summarize all phases
    ├─ Closed-loop check (CLAUDE.md + rules + hooks + env)
    └─ Output next steps

Flag Short-Circuit Semantics

Flag	Phase 1-2	Phase 3-4	Phase 5-6.5	Phase 6.7	Phase 7
(none)	Execute	Execute	Execute	Execute	Full report
--detect-only	Execute	Skip	Skip	Skip	Detection results only
--lite	Execute	Execute	Skip	Skip	CLAUDE.md only
--no-rules	Execute	Execute	Skip rules	Execute	Report
--no-hooks	Execute	Execute	Skip hooks	Execute	Report
--env-only	Skip	Skip	Skip	Execute	Env report only (skill-level directive)

Phase 1: Detect Project Environment

Execute the following detections in order; see references/detection-rules.md for detailed rules:

Detection Steps

1. Detect Ecosystem — Glob for manifest files (package.json, pyproject.toml, Cargo.toml, go.mod, build.gradle, pom.xml, Gemfile). Priority order in references/detection-rules.md.
2. Read manifest — Extract project name, dependencies, scripts (Node.js: package.json; others: ecosystem manifest)
3. Detect Package Manager — Lockfile detection (Node.js only): pnpm-lock.yaml → pnpm, yarn.lock → yarn, else npm (priority order per references/detection-rules.md)
4. Detect Framework — From dependencies. See references/detection-rules.md#framework
5. Detect Database — From dependencies. See references/detection-rules.md#database
6. Detect Entrypoints — Glob framework-specific candidates. See references/detection-rules.md#entrypoints
7. Detect Scripts — From manifest scripts field. See references/detection-rules.md#scripts. Missing scripts → # N/A (no script found)

For non-Node.js ecosystems, skip Node-specific steps and use ecosystem-specific detection from references/detection-rules.md.

Phase 2: Confirm Detection Results

Present a table of all 9 auto-detected placeholders with | Placeholder | Detected Value | Source | columns. Additional manual placeholders ({TICKET_PATTERN}, {ISSUE_TRACKER_URL}, {TARGET_BRANCH}) may remain if not auto-detectable — these are acceptable and should be noted as "manual" in Phase 4 verification. Wait for user confirmation before proceeding to Phase 3.

Phase 2.5: Select Ecosystem Blocks

Based on detected manifest (from Phase 1.0):

Manifest	Ecosystem tag
package.json	node-ts
pyproject.toml	python
go.mod	go
Cargo.toml	rust
Gemfile	ruby
pom.xml / build.gradle	java

Phase 3: Write to .claude/CLAUDE.md

Prerequisite: User has confirmed, and not in --detect-only mode.

1. Read CLAUDE.template.md (if not found, fallback to CLAUDE.md)
2. Remove <!-- block:X -->...<!-- /block --> sections NOT matching detected ecosystem
3. Remove remaining block markers (<!-- block:... -->, <!-- /block -->)
4. Execute Edit for each placeholder (using replace_all: true)
5. Write to .claude/CLAUDE.md (create directory if needed)

If .claude/CLAUDE.md does not exist, create it from the rendered template.

Phase 4: Verify CLAUDE.md

1. Read .claude/CLAUDE.md
2. Grep: \{[A-Z_]+\} — confirm no remaining auto-detected placeholders. Exclude ${...} shell variable matches (e.g., ${CLAUDE_PLUGIN_ROOT}) from the count — these are intentional env var references, not unfilled placeholders.
3. Output summary table with all placeholder values and remaining count

If --detect-only or --lite, skip to Phase 7.

Phase 5: Install Rules + Backfill CLAUDE.md

Skip if: --no-rules or --lite or --detect-only.

5.1 Locate Plugin Rules Directory

Find the plugin's rules/ directory using this priority (short-circuit on first match):

1. Glob search — search known Claude plugin locations:

   Glob: ~/.claude/plugins/**/sd0x-dev-flow/rules/auto-loop.md
   Glob: ${REPO_ROOT}/node_modules/sd0x-dev-flow/rules/auto-loop.md
   

2. Plugin-relative fallback — try reading @rules/auto-loop.md to confirm accessibility. If readable, derive the rules directory.

3. Not found → hard error for this phase (do not silently skip). Output explicit failure with remediation steps:

   ⛔ Rule source not found. Auto-loop rules cannot be installed.
   
   Remediation (choose one):
   1. Install the plugin: /plugin marketplace add sd0xdev/sd0x-dev-flow && /plugin install sd0x-dev-flow@sd0xdev-marketplace
   2. Copy rules manually from a machine that has the plugin installed
   3. Re-run with --no-rules to skip (rules layer will be missing)
   

   Then skip Phase 5 and continue to Phase 6. Phase 7 will report this as ⚠️ Partial.

5.2 Copy Rules

1. mkdir -p ${REPO_ROOT}/.claude/rules/

2. Copy all 13 managed rules:

   Rule	Purpose
   auto-loop.md	Auto review loop (behaviour-layer contract; hooks remind, nothing blocks)
   codex-invocation.md	Codex independent research requirement
   discretion.md	Instruction tiers: Anchor / Default / Guidance
   fix-all-issues.md	Zero tolerance for unfixed issues
   framework.md	Framework conventions
   testing.md	Test structure and requirements
   security.md	OWASP security checklist
   git-workflow.md	Git branch and commit conventions
   logging.md	Structured logging standards
   docs-writing.md	Documentation writing conventions
   docs-numbering.md	Document numbering scheme
   self-improvement.md	Self-improvement loop
   context-management.md	Data-driven context monitoring

3. Create override template (unmanaged, not manifest-tracked):

   • auto-loop-project.md · testing-project.md — user-owned override templates (see Phase 3.6 in /install-rules)

4. Conflict strategy:

   Scenario	Action
   File does not exist	Install
   File exists, content identical	Skip
   File exists, content differs	Skip + warn as conflict

5. After copying, collect hashes and write manifest:

Note: /project-setup uses fresh-install semantics (install new / skip identical / warn on conflict; no smart merge). For smart merge (section merge, legacy migration, --legacy-strategy), run /install-rules directly. After rule installation, /install-rules automatically creates auto-loop-project.md (user-owned override template) if it doesn't exist. See skills/install-rules/SKILL.md.

5.3 Backfill CLAUDE.md (Closed-Loop Guarantee)

Ensure .claude/CLAUDE.md contains @rules/ references so the auto-loop engine can activate:

1. Grep .claude/CLAUDE.md for @rules/auto-loop.md
2. Found → check if @rules/auto-loop-project.md also present:
   • Both present → skip (fully configured)
   • auto-loop.md present, auto-loop-project.md missing → insert - @rules/auto-loop-project.md -- Project-specific auto-loop overrides (user-owned) after auto-loop.md line
3. Not found but file exists → append ## Rules block at end of file (15 @rules/ references (13 managed + 2 override templates) from CLAUDE.template.md ## Rules section)
4. File does not exist (edge case: Phase 3 was skipped) → extract from CLAUDE.template.md: ## Required Checks through ### Auto-Loop Rule sections + ## Rules section → create minimal .claude/CLAUDE.md

When extracting from template, remove ecosystem block markers and leave unresolved placeholders as {PLACEHOLDER}.

5.4 Output Rules Report

## Rules Install Report

**Source**: <plugin-rules-path>
**Target**: <repo-root>/.claude/rules/

| Rule | Status |
|------|--------|
| auto-loop.md | ✅ Installed |
| ... | ... |

**Installed**: N / **Skipped**: M / **Conflicts**: K
**Manifest**: .sd0x/install-state.json
**CLAUDE.md backfill**: ✅ @rules/ references present

Phase 6: Install Hooks

Skip if: --no-hooks or --lite or --detect-only.

6.1 Locate Plugin Hooks Directory

Same 3-level fallback as Phase 5.1, but search for hooks/pre-edit-guard.sh:

1. Glob: ~/.claude/plugins/**/sd0x-dev-flow/hooks/pre-edit-guard.sh

2. Glob: ${REPO_ROOT}/node_modules/sd0x-dev-flow/hooks/pre-edit-guard.sh

3. Plugin-relative fallback: @hooks/pre-edit-guard.sh

4. Not found → hard error for this phase (do not silently skip). Output explicit failure with remediation steps:

   ⛔ Hook source not found. The reminder-layer hooks cannot be installed.
   
   Remediation (choose one):
   1. Install the plugin: /plugin marketplace add sd0xdev/sd0x-dev-flow && /plugin install sd0x-dev-flow@sd0xdev-marketplace
   2. Copy hooks manually from a machine that has the plugin installed
   3. Re-run with --no-hooks to skip (reminder hooks will be missing)
   

   Then skip Phase 6 and continue to Phase 7. Phase 7 will report this as ⚠️ Partial.

6.2 Copy Hook Scripts

1. mkdir -p ${REPO_ROOT}/.claude/hooks/

2. Copy 6 hooks (exclude namespace-hint.sh — plugin-only):

   Hook	Event	Matcher	Purpose
   pre-edit-guard.sh	PreToolUse	Edit|Write|NotebookEdit	Block editing .env/.git
   post-edit-format.sh	PostToolUse	Edit|Write|NotebookEdit	Auto-format reminder
   post-skill-auto-loop.sh	PostToolUse	Skill	Post-review reminder (next gate)
   stop-guard.sh	Stop	—	Reminder: open gates at stop (markdown, exit 0)
   user-prompt-review-guard.sh	UserPromptSubmit	—	Per-prompt [AUTO_LOOP_STATE] fact line
   post-compact-auto-loop.sh	SessionStart	compact	Re-inject auto-loop reminders after compaction

3. chmod +x each installed script.

4. Conflict strategy: same as Phase 5.2.

6.3 Merge Hook Definitions into Settings

Target: ${REPO_ROOT}/.claude/settings.json

Hook definition mapping (uses $CLAUDE_PROJECT_DIR for portability):

{
  "hooks": {
    "PreToolUse": [
      {"matcher": "Edit|Write|NotebookEdit", "hooks": [{"type": "command", "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/pre-edit-guard.sh"}]}
    ],
    "PostToolUse": [
      {"matcher": "Edit|Write|NotebookEdit", "hooks": [{"type": "command", "command": "\"$CLAUDE_PROJECT_DIR\"/.claude/hooks/post-edit-format.sh"}]},
      {"matcher": "Skill", "hooks"    
    
     
            
    
     
            
    
     
            
    
  

Note: Environment variables are configured in Phase 6.7 (independent of hook installation). Phase 6.3 only handles hook definition merging.

Merge strategy:

• Read existing settings file (create {} if not exists)
• Legacy migration: scan for bare .claude/hooks/<name>.sh paths → upgrade to "$CLAUDE_PROJECT_DIR"/.claude/hooks/<name>.sh
• For each event: append-only merge (skip if same command path exists)
• Coexistence detection: if hooks/hooks.json exists at repo root (= plugin source repo), warn that plugin hooks and installed hooks may coexist. Runtime arbitration handles dedup automatically
• Write updated settings back (hook definitions only — env vars deferred to Phase 6.7)

6.4 Output Hooks Report

## Hooks Install Report

**Source**: <plugin-hooks-path>
**Scripts**: <repo-root>/.claude/hooks/
**Settings**: <repo-root>/.claude/settings.json

| Hook | Script | Settings | Status |
|------|--------|----------|--------|
| pre-edit-guard.sh | ✅ Copied | ✅ Added | Installed |
| ... | ... | ... | ... |

**Installed**: N / **Skipped**: M / **Conflicts**: K

Phase 6.5: Install Scripts

Skip if: --lite or --detect-only.

6.5.1 Locate Plugin Scripts Directory

Same 3-level fallback as Phase 5.1, but search for scripts/precommit-runner.js:

1. Glob: ~/.claude/plugins/**/sd0x-dev-flow/scripts/precommit-runner.js
2. Glob: ${REPO_ROOT}/node_modules/sd0x-dev-flow/scripts/precommit-runner.js
3. Plugin-relative fallback: @scripts/precommit-runner.js

Not found → warn + skip Phase 6.5. Phase 7 will report ⚠️ Partial.

6.5.2 Copy Scripts

1. mkdir -p ${REPO_ROOT}/.claude/scripts/lib
2. Copy 5 scripts:

Script	Purpose	Dependencies
precommit-runner.js	Precommit runner for /precommit, /precommit-fast; notes its own pass/fail via review-state.js	lib/utils.js, review-state.js
verify-runner.js	Verify runner for /verify	lib/utils.js
review-state.js	Reminder-state checker/noter (single slot per plane under ~/.cache/sd0x-dev-flow/) read by the locally installed hooks and by /remind, /next-step, /pre-pr-audit	lib/tree-digest.js
lib/utils.js	Shared utilities	None
lib/tree-digest.js	Per-plane content digests (binds a noted verdict to the tree that earned it)	None

1. Conflict strategy: same as Phase 5.2.

Scenario	Action
File does not exist	Install
File exists, content identical	Skip
File exists, content differs	Skip + warn as conflict

6.5.3 Update Manifest

1. Read .sd0x/install-state.json (create {} if not exists)
2. Read plugin version from .claude-plugin/plugin.json or package.json
3. Update: schema_version: 1, installed_at, plugin_version, scripts key
4. Compute hash per file: git hash-object --no-filters .claude/scripts/<name>
5. Preserve all existing top-level keys (e.g. rules, hook_scripts, and any unknown keys)
6. Write back to .sd0x/install-state.json

6.5.4 Output Scripts Report

## Scripts Install Report

**Source**: <plugin-scripts-path>
**Target**: <repo-root>/.claude/scripts/

| Script | Status |
|--------|--------|
| precommit-runner.js | Installed/Skipped/Conflict |
| verify-runner.js | Installed/Skipped/Conflict |
| review-state.js | Installed/Skipped/Conflict |
| lib/utils.js | Installed/Skipped/Conflict |
| lib/tree-digest.js | Installed/Skipped/Conflict |

**Installed**: N / **Skipped**: M / **Conflicts**: K

Phase 6.7: Configure Environment Variables

Skip if: --detect-only or --lite. Run exclusively with: --env-only (skip all other phases, jump directly to 6.7 → 7).

Purpose: Write recommended environment variables to .claude/settings.json env object, independent of hook installation. This phase runs even when --no-hooks is specified.

6.7.1 Env Var Catalog

Variable	Default	Condition	Description
CLAUDE_CODE_AUTO_COMPACT_WINDOW	320000	1M context model detected	Auto-compact window size (tokens) — delays compaction to preserve more context

Legacy Recommendations (auto-upgrade prompt)

When an existing setting matches a previously recommended value (not the current one), flag it as Upgrade in the interactive table so the user can explicitly confirm the change. Never rewrite silently.

Variable	Legacy value(s)	Current recommended	Retired on
CLAUDE_CODE_AUTO_COMPACT_WINDOW	456000	320000	2026-04-17
STOP_GUARD_MODE	strict, warn (any value)	Remove — the Stop hook is reminder-only since hook-lightweighting; the setting is dead config	2026-08-13

6.7.2 Large Context Model Detection

Determine whether CLAUDE_CODE_AUTO_COMPACT_WINDOW should be recommended:

1. Self-awareness check: Claude can inspect its own system environment description for "1M context" indicators (e.g. model description includes "1M context" or "(with 1M context)")
2. Detected → include CLAUDE_CODE_AUTO_COMPACT_WINDOW: "320000" in recommendations with note: "1M context model detected"
3. Not detected or uncertain → ask user: "Are you using a 1M context model? (e.g. Claude Opus 4.6 1M)" — include in recommendations only on confirmation
4. User declines → omit CLAUDE_CODE_AUTO_COMPACT_WINDOW from recommendations

6.7.3 Interactive Flow

1. Read existing env values from both .claude/settings.local.json and .claude/settings.json (create {} if not exists). Runtime precedence: settings.local.json > settings.json

2. Build recommendations table showing effective current value:

   ## Environment Variables
   
   Only one row per variable appears at a time; the examples below are **alternatives** for the same variable, selected by its current state.
   
   Example A — first-time install (variable not yet set):
   
   | Variable | Current (effective) | Source | Recommended | Action |
   |----------|---------------------|--------|-------------|--------|
   | CLAUDE_CODE_AUTO_COMPACT_WINDOW | (not set) | — | 320000 | Add (1M model) |
   
   Example B — upgrade path (variable already set to a legacy value):
   
   | Variable | Current (effective) | Source | Recommended | Action |
   |----------|---------------------|--------|-------------|--------|
   | CLAUDE_CODE_AUTO_COMPACT_WINDOW | 456000 | settings.json | 320000 | **Upgrade** (legacy value, retired 2026-04-17) |
   

3. Present to user for confirmation — user may accept all, modify values, or skip specific vars. For rows marked Upgrade, display the retirement date and reason so the user can make an informed decision.

4. Apply confirmed changes to .claude/settings.json (default) or .claude/settings.local.json (with --local)

6.7.4 Merge Strategy

• Read existing settings file (create {} if not exists)
• Merge env vars into env object:
  • If key does not exist → Add
  • If key exists and value matches current recommended → Skip
  • If key exists and value matches a Legacy value listed in 6.7.1 → Upgrade (surface retirement date + reason; apply only after user confirmation, never silently overwrite)
  • If key exists and value is user-custom (neither current nor legacy) → Update (only after user confirmation; default to preserving)
• Preserve all existing env keys not in the catalog (do not drop unknown keys)
• Preserve all non-env keys in settings (hooks, etc.)
• Write updated settings back

6.7.5 Interaction with Phase 6.3 and /install-hooks

• Phase 6.3 (within /project-setup) defers env writes to Phase 6.7
• When both run in the same session, Phase 6.7 runs after Phase 6 and writes to the same target file
• --no-hooks skips Phase 6 but Phase 6.7 still runs → env vars are always configured

6.7.6 Output Env Config Report

## Environment Config Report

**Target**: <repo-root>/.claude/settings.json (or settings.local.json with --local)

| Variable | Value | Effective Source | Status |
|----------|-------|-----------------|--------|
| CLAUDE_CODE_AUTO_COMPACT_WINDOW | 320000 | settings.json | ✅ Added (1M model) — or ✅ Upgraded (456000 → 320000, legacy retired 2026-04-17) when upgrading |

**Model**: Opus 4.6 (1M context) → auto-compact window recommended
**Precedence note**: Runtime resolves env > settings.local.json > settings.json > default

Phase 7: Final Verification Report

Summarize all phases and perform closed-loop check:

Closed-Loop Check

Condition	Check	Required
CLAUDE.md behavior text	Required Checks section exists	✅
@rules/ references	@rules/auto-loop.md in .claude/CLAUDE.md	✅
Rule files	.claude/rules/auto-loop.md exists	✅
Hook reminders	stop-guard in .claude/settings.json	✅
Script runners	.claude/scripts/precommit-runner.js exists	✅ (unless --lite or --detect-only)
Auto-compact window	env.CLAUDE_CODE_AUTO_COMPACT_WINDOW in target settings file	✅ (1M model only)

Output

## Project Setup Complete

| Phase | Status |
|-------|--------|
| Detection | ✅ Framework: X, PM: Y, DB: Z |
| CLAUDE.md | ✅ Configured (0 remaining placeholders) |
| Rules | ✅ 13/13 managed rules + 2 override templates |
| Hooks | ✅ 6/6 installed + settings merged |
| Scripts | ✅ 5/5 scripts installed |
| Env Config | ✅ AUTO_COMPACT_WINDOW=320000 (1M) |

### Closed-Loop Status
✅ Auto-loop reminder loop fully configured
(or ⚠️ Partial — missing: hooks (reminder layer inactive))
(or ⚠️ Partial — missing: rules)
(or ⚠️ Partial — missing: scripts (runner not installed))
(or ℹ️ Auto-compact window not set — standard context model detected)

### Next Steps
- Run `/repo-intake` for a full project scan
- Use `HOOK_BYPASS=1` as emergency escape hatch
- Use `/install-rules --force` to upgrade rules later

Verification

• All 9 auto-detected placeholders detected or marked N/A
• User confirmed detection results before writing
• No remaining auto-detected {UPPER_CASE} placeholders in .claude/CLAUDE.md after setup (manual placeholders like {TICKET_PATTERN} are acceptable)
• .claude/rules/ contains 15 .md files (13 managed + 2 override templates) (unless --no-rules or --lite)
• .claude/hooks/ contains 6 .sh files with execute permission (unless --no-hooks or --lite)
• .claude/settings.json contains hook definitions (unless --no-hooks or --lite)
• .claude/scripts/ contains precommit-runner.js, verify-runner.js, review-state.js, lib/utils.js, and lib/tree-digest.js (unless --lite or --detect-only)
• .claude/CLAUDE.md contains @rules/auto-loop.md reference (unless --lite)
• env.CLAUDE_CODE_AUTO_COMPACT_WINDOW is set in target settings file when 1M model detected (unless --detect-only or --lite)

References

See detection rules: detection-rules.md