watch-ci

name	watch-ci
description	Monitor GitHub Actions CI runs until completion. Use when: watching CI after push, checking build status, monitoring PR checks, waiting for CI completion, user says 'watch CI', 'check CI', 'CI status', 'monitor build', or /watch-ci. Not for: pushing code (use push-ci), creating PRs (use create-pr). Output: per-run verdict (pass/fail/timeout).
allowed-tools	Bash(gh:*), Bash(git:*), Read, Monitor

Watch CI

Monitor GitHub Actions CI runs for the current HEAD (or a specified SHA) until completion, then report verdict.

Trigger

• Keywords: watch CI, check CI, CI status, monitor build, build status, is CI passing, watch actions, CI result

When NOT to Use

• Pushing code to remote (use /push-ci)
• Creating pull requests (use /create-pr)
• Running local tests (use /verify or /precommit)

Workflow

Auto-detect (branch + SHA) → Find matching runs → Quick-check status → Watch or Report → Verdict

Step 1: Resolve Target

Determine which CI runs to monitor. Use arguments if provided, otherwise auto-detect.

BRANCH=${ARG_BRANCH:-$(git rev-parse --abbrev-ref HEAD)}
HEAD_SHA=${ARG_SHA:-$(git rev-parse HEAD)}
TIMEOUT=${ARG_TIMEOUT:-10}
INTERVAL=${ARG_INTERVAL:-30}

If --run-id <id> is specified, skip run discovery and monitor that specific run directly.

Step 2: Find CI Runs

Find runs matching the target SHA on the target branch:

gh run list --branch "$BRANCH" --limit 30 \
  --json databaseId,headSha,status,name,url

Note: Use --limit 30 (not 10) to avoid missing target SHA runs on busy branches. Filter results client-side by HEAD_SHA.

Filter results to those matching HEAD_SHA.

Retry logic: If no matching runs found, retry up to 3 times by re-running the gh run list command. The natural processing delay between retries provides sufficient wait time — do not use sleep N (N ≥ 2) as the first command, the harness will block it. All retry commands must start with gh or git to match allowed-tools. CI workflows may take a few seconds to trigger after push.

If still no runs found after retries:

⚠️ No CI run detected for SHA <sha>. Possible causes:
- No workflow configured for this branch
- Path-filtered workflow didn't trigger
- Check: gh run list --branch <branch>

Step 3a: Quick Status Check

Before starting a long-running watch, check if runs are already completed:

gh run view <run-id> --json status,conclusion,name,url

Result	Action
All runs completed	Skip to Step 4 (Verdict) immediately — no watching needed
Some completed, some in progress	Report completed verdicts, watch remaining (Step 3b)
All in progress	Proceed to Step 3b

Step 3b: Watch Runs

For each in-progress run, monitor with gh run watch:

gh run watch <run-id> --exit-status -i "$INTERVAL"

Poll interval: $INTERVAL defaults to 30 seconds (configurable via --interval). gh's own default is 3 seconds; at that rate, Monitor streaming surfaces ~20 notifications per minute, which has been reported as noisy. 30 seconds reduces poll noise by ~90% at the cost of ≤ 27 s additional completion-detection lag, which is negligible for typical multi-minute CI runs. Pass --interval 3 to restore the old cadence when near-real-time feedback matters.

Execution mode: Monitor streaming is the default — non-blocking, reliable notifications for each status line.

Mode	When	Behavior
Monitor (default)	No mode flag	Stream gh run watch via Monitor tool. Each stdout line arrives as a notification. Claude processes verdict on completion. Non-blocking.
Foreground (--blocking)	--blocking flag passed	Execute gh run watch inline (blocking). Claude waits for completion, then reports verdict. Use when Monitor is unavailable or for simple single-run cases.
Background (--background)	--background flag passed	Launch with Bash(run_in_background: true). Legacy fallback only — run_in_background delivers a single completion event, not streaming progress, so Monitor is preferred for rich updates. Provide a manual check command.

Monitor mode (default) — behavior:

1. Launch gh run watch <run-id> --exit-status -i "$INTERVAL" via Monitor tool with description: "CI run <run-id> (<name>)" and timeout_ms: TIMEOUT * 60 * 1000
2. Each stdout line (status update) arrives as a streaming notification — $INTERVAL controls how often those lines fire
3. On exit (run completes or fails), parse final output for pass/fail status
4. Report verdict

Foreground mode (--blocking) — behavior:

1. Execute gh run watch <run-id> --exit-status -i "$INTERVAL" inline via Bash
2. Wait for completion (blocking) — $INTERVAL only affects how often gh polls the API, not wall-clock completion
3. Parse output for pass/fail status
4. Report verdict

Background mode (--background) — legacy fallback only:

1. Quick-check (Step 3a) first — if already completed, report immediately and skip background
2. If still running, launch gh run watch <run-id> --exit-status -i "$INTERVAL" with Bash(run_in_background: true); $INTERVAL still applies (same gh call), but because background mode only surfaces a single completion event, poll cadence has no user-visible effect here
3. Inform the user honestly: "CI monitoring launched in background for run <id>. Background notifications may not auto-report reliably. To check manually: gh run view <id> or re-run /watch-ci"
4. Do NOT promise streaming progress updates — Bash(run_in_background: true) only delivers a single completion event, not per-status-line streaming; for rich updates, use Monitor mode

Multiple runs: If multiple workflow runs match (e.g. CI + Auto Release), launch parallel Monitor instances — one per run. Each Monitor reports its own per-run verdict via notifications. Overall verdict = worst individual result (any fail → overall fail). In --blocking mode, watch sequentially. In --background mode, launch each as a separate background task.

Timeout enforcement: Default 10 minutes (configurable via --timeout). In Monitor mode, set timeout_ms: TIMEOUT * 60 * 1000 (Monitor tool enforces deadline). In --blocking mode, enforce via Bash tool's timeout parameter (milliseconds). If a timeout occurs, report the run as timed out. Timeout applies per individual run invocation, not to the entire monitoring session.

Step 4: Verdict

CI Result	Output
All pass	"✅ CI passed" + per-run URLs
Any fail	Failing jobs + gh run view <id> --log-failed summary
Timeout	"⚠️ CI still running after min — gh run watch <id>"

Overall verdict = worst individual result (any fail → overall fail).

Prohibited Actions

❌ Running `gh run view` once and treating that as "monitoring" — one-shot status check is NOT watching
❌ Promising per-status-line streaming updates in background mode — `Bash(run_in_background: true)` only delivers a single completion event; use Monitor for rich streaming
❌ Skipping the quick-check step (Step 3a) — always check status before deciding to watch
❌ Reporting "CI monitoring started" without actually launching `gh run watch`
❌ Using `gh run list` results as the final verdict — list shows status at query time, not completion
❌ Using `sleep N` (N ≥ 2) as the first Bash command — harness blocks it; retry by re-running `gh run list` directly
❌ Using commands outside `allowed-tools` (only `gh`, `git`, `Read`, and `Monitor` are permitted)
❌ Using `Bash(run_in_background: true)` when Monitor is available — Monitor is the preferred streaming mechanism

Arguments

Argument	Description	Default
--sha <sha>	SHA to monitor	git rev-parse HEAD
--branch <branch>	Branch to filter runs	git rev-parse --abbrev-ref HEAD
--timeout <min>	Watch timeout in minutes	10
--interval <sec>	Poll interval for gh run watch -i — controls how often gh queries the API and emits a status line (Monitor mode surfaces each line as one notification)	30
--run-id <id>	Monitor a specific run ID directly	auto-detect
--blocking	Use foreground blocking mode instead of Monitor streaming	Monitor
--background	Legacy fallback: launch in background (unreliable auto-reporting)	Monitor

Output

## CI Monitor Report

**Branch**: `<branch>`
**SHA**: `<sha>`

| Run | Name | Status | URL |
|-----|------|--------|-----|
| 123 | CI | ✅ Pass | https://github.com/.../runs/123 |
| 124 | Auto Release | ✅ Pass | https://github.com/.../runs/124 |

## Verdict: ✅ All Pass / ⛔ N failures

Verification

• Target SHA resolved (from argument or auto-detect)
• CI runs matched by SHA (not "latest")
• All matching runs monitored
• Verdict reported (pass/fail/timeout)

Examples

Input: /watch-ci
Action: Auto-detect HEAD SHA → find matching runs → quick-check status
  If completed → report verdict immediately
  If still running → launch Monitor stream per run → receive status notifications → report verdict on completion

Input: /watch-ci --sha abc1234
Action: Find runs for SHA → quick-check → Monitor stream if needed → verdict

Input: /watch-ci --run-id 12345678
Action: Quick-check run 12345678 → Monitor stream if still running → verdict

Input: /watch-ci --blocking
Action: Auto-detect → find runs → quick-check
  If completed → report immediately
  If still running → foreground watch (blocking) → wait → report verdict

Input: /watch-ci --background
Action: Auto-detect → find runs → quick-check
  If completed → report immediately (no background needed)
  If still running → launch background watch (legacy) → "CI monitoring launched, check manually with `gh run view <id>`"

Input: Is CI passing?
Action: Auto-detect → find runs → quick-check → Monitor stream if needed → verdict