Unified swap + bridge router combining WOOFi (best-price meta-aggregator on 14 EVM
chains) and the LayerZero Value Transfer API (broad multi-chain bridging incl.
Solana, Aptos, TON — discover supported chains/tokens dynamically). One workflow:
classify the request, validate the wallet can actually execute, quote, compare
complete routes, approve-then-requote-then-execute, and verify destination receipt.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Unified swap + bridge router combining WOOFi (best-price meta-aggregator on 14 EVM
chains) and the LayerZero Value Transfer API (broad multi-chain bridging incl.
Solana, Aptos, TON — discover supported chains/tokens dynamically). One workflow:
classify the request, validate the wallet can actually execute, quote, compare
complete routes, approve-then-requote-then-execute, and verify destination receipt.
["swap","bridge","trade","convert tokens","cross chain swap","bridge tokens","best price","best rate","swap and bridge","move tokens to another chain","transfer across chains"]
user-invocable
true
OmniRoute — Unified Swap + Bridge Router
One skill for any "get token A on chain X into token B on chain Y" request. It combines
two engines and selects the best complete executable route, not just the best quote:
Broad multi-chain bridging (EVM, Solana, Aptos, TON…) via OFT / Stargate / CCTP / Aori. Status polling with explorer URLs. Proxied auth via core.http_client.
Do not hard-code chain/token coverage claims — discover live via LayerZero
GET /v1/chains and GET /v1/tokens, and WOOFi's chain table below.
Step 0 — Classify the request
Same-chain swap on an EVM chain → WOOFi (/v2/swap). LayerZero does not do
same-chain swaps.
Cross-chain, both chains in WOOFi's 14 EVM list, both tokens ERC-20/native →
quote both engines and select per the route-ranking rules in Step 2.
Any non-EVM chain (Solana, Aptos, TON, Tron…), or a chain outside WOOFi's list,
or native-USDC-via-CCTP preference → LayerZero only.
Swap needed on the destination that LayerZero can't fulfill → chain the engines:
LayerZero bridge first, then WOOFi swap on the destination chain (two confirmations,
gas on both chains — tell the user, and include destination gas in the comparison).
WOOFi's documented v2 chain set (validate support at execution time — treat an API
error as "unsupported", not a bug): arbitrum, base, bsc, polygon, optimism, avalanche,
ethereum, linea, mantle, sonic, berachain, hyperevm, monad, zksync.
Native-token handling differs per engine:
WOOFi (EVM only): use the symbol ("ETH", "BNB", "AVAX", "POL", "MNT",
"S", "BERA", "MON") or the EVM placeholder
.
0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
LayerZero: do NOT assume a universal placeholder. Resolve the native/token
address per chain via GET /v1/chains (nativeCurrency.address) and
GET /v1/tokens — non-EVM chains (Solana, Aptos, TON…) use different address
formats entirely.
Step 1 — Pre-flight validation (two stages)
A better quote can still be an unexecutable route. Exact gas requirements are unknown
before transaction construction, so validation happens in two stages:
Stage A — before quoting:
Source token balance covers the sell amount (fetch on-chain, using the token's
real decimals — never assume 18).
Token identity: confirm chain ID, token address, decimals, and symbol together.
Never trust symbol resolution alone, especially for unknown or unverified tokens —
cross-check the resolved address against discovery data before quoting.
Destination address is valid for the destination chain's format and matches the
user's stated intent (source and destination wallets may legitimately differ —
confirm explicitly when they do).
Wallet compatibility in broad terms (e.g. can it sign EIP-712? can it sign on
Solana?).
Stage B — after transaction construction, before signing:
Native gas balance covers the actual built steps: approval gas + swap/bridge gas
any value/native_fee attached. For chained routes, also destination-chain gas.
Step types in the built route are all executable by the wallet.
Approval target and spender match the API-generated calldata.
Balances still sufficient for the exact amounts in the built transactions.
If any check fails, report it instead of proceeding.
The key is injected by sc-proxy — do not set LAYERZERO_API_KEY; route calls
through core.http_client (proxied_post/proxied_get). Plain curl works only for
the no-auth discovery endpoints (/chains, /tokens, /metadata).
from core.http_client import proxied_post
r = proxied_post(
"https://transfer.layerzero-api.com/v1/quotes",
json={
"srcChainKey": "base", "dstChainKey": "solana",
"srcTokenAddress": "<src token address, resolved via discovery>",
"dstTokenAddress": "<dst token address, resolved via discovery>",
"srcWalletAddress": "<wallet>", "dstWalletAddress": "<dst wallet>",
"amount": "1000000000000000", # STRING, token base units per its decimals"options": {"amountType": "EXACT_SRC_AMOUNT",
"feeTolerance": {"type": "PERCENT", "amount": 2}},
},
headers={"x-api-key": "proxy", "SC-CALLER-ID": f"chat:{thread_id}"},
timeout=40,
)
Handle the LayerZero response defensively:
The body may contain error, an empty quotes array, and/or rejectedQuotes.
Treat empty/error as "no route" and say why (surface rejection reasons if present).
Compare every entry in quotes on dstAmount, dstAmountMin, feeUsd, and
step count — do not blindly take quotes[0].
Inspect each quote's userSteps for step types: transaction steps vs signature
(EIP-712) steps. Only select routes whose step types the wallet can execute.
Quotes expire — track age and re-quote if execution is delayed.
Comparison rules
Never subtract feeUsd from a destination token quantity. Compare destination
output in human token units (convert LayerZero base units using the destination
token's decimals; WOOFi amounts are already human-readable).
Minimum received is an amount, not a price. LayerZero returns it directly as
dstAmountMin. WOOFi's guaranteed_price is a price: compute WOOFi's minimum
output as guaranteed_price × sell_amount (or use a returned minimum-output field
if the response provides one). Never present the two fields as equivalent.
Display these separately, never blended into one number:
protocol destination output (expected)
minimum received, in destination-token units (computed as above)
native gas cost on source (and destination, for chained routes)
bridge/protocol fee (feeUsd, native_fee)
estimated USD value of the output (informational)
Account for approval gas, and for chained routes the destination swap's gas and
slippage, when ranking.
Route ranking (no fixed engine preference)
Rank candidate routes by, in order of weight:
Net destination value, defined as:
output USD value − source gas USD − destination gas USD − protocol fees USD.
Token and native-gas USD prices must come from a stated live source (e.g. token
price.usd from LayerZero /v1/tokens, or another live price feed named in the
comparison). If reliable live prices are unavailable, do not claim a definitive
net-value winner — present the raw per-route figures and let the user choose.
Minimum received (worst-case protection)
Total gas across all required transactions
Estimated duration
Number of signatures/transactions and route reliability — when outputs are
close, prefer the route with fewer transactions and fewer failure points
Slippage exposure
Present the comparison and get explicit user confirmation before signing anything.
Step 3 — Execute
⚠️ Approval sequencing — never blindly iterate original tx_steps
After an approval confirms, rebuild the transaction: quotes, calldata, allowance
state, and routing conditions may have changed since the original response was built,
and executing the stale step risks a revert (observed in live testing). For both
WOOFi same-chain and cross-chain routes:
If needs_approve is true, send only the approval step first.
Before signing it, verify the approval's to is the sell token's contract and
the approved spender matches the spender in the API-generated calldata. Use an
exact-amount approval where possible — never unlimited allowances.
Wait for the approval transaction to confirm on-chain.
Re-call /v2/swap (or /v2/cross_chain/swap) to rebuild the transaction.
Verify the fresh response has needs_approve: false.
Execute the fresh swap step. If it still reports approval needed, stop and report —
do not loop retries.
The same principle applies to LayerZero userSteps: after an approval step confirms,
prefer regenerating steps (POST /v1/build-user-steps with {"quoteId": ...}) before
sending the bridge transaction, and always regenerate for Solana (blockhashes expire
in ~60s).
Before every signature
Decode and display to the user: destination contract, chain, token, amount, spender
(for approvals), and native value attached. Enforce guardrails: maximum total fee,
maximum slippage, and minimum received — abort if the fresh transaction violates what
was confirmed.
Confirmation validity: a rebuilt/fresh quote may execute without asking the user
again only if amount, destination address, spender, slippage, minimum received, and
total fee all remain within the limits the user already approved. Any material change
to any of these requires renewed confirmation.
LayerZero step types
Transaction steps: sign and send in order, waiting for confirmation between steps.
Signature steps (AORI/intent): sign the EIP-712 payload in
userStep.signature.typedData, then POST /v1/submit-signature with
{"quoteId", "signatures": ["0x..."]}.
AA wallets: if the wallet returns only a user_operation_hash, resolve it to
the final on-chain transaction hash — via the bundler receipt when available,
otherwise via wallet transaction history or destination transfer records. A
missing bundler receipt is not evidence of failure: never mark a transfer failed
merely because the receipt is unavailable; fall back to on-chain verification.
Step 4 — Verify completion (not just "tx sent")
Success requires all of the following, not merely an explorer link:
Source transaction confirmed (final tx hash, not a user-op hash).
Source wallet actually debited the expected amount.
Destination receipt — primary evidence is the destination transaction receipt
and its token Transfer logs (amount, recipient, token contract). Use the
destination wallet's balance delta only as corroboration: unrelated concurrent
transfers can distort a balance-only check, and for native assets the delta is
also skewed by destination gas or other activity. Compare the received amount
against the minimum received — flag if below.
Report the exact destination amount received, in human units.
Polling:
LayerZero:GET /v1/status/{quoteId}?txHash=0x... (proxied) every ~4s.
Terminal: SUCCEEDED, FAILED, UNKNOWN; non-terminal: PENDING, PROCESSING.
Share explorerUrl — but still perform the destination receipt/log verification
above.
WOOFi cross-chain: LayerZeroScan (https://layerzeroscan.com/tx/<hash>) is a
tracking aid only — completion is confirmed by the destination receipt/log
verification.
Chained flows (bridge → swap): start the destination-chain WOOFi swap only after
the bridge is verified complete (funds visible), then run the full approval-requote
sequence again on the destination chain.
Safety rules
⚠️ Never approve the LZMulticall (Wrapper) contract as a token spender. Execute
API-returned steps as-is; never hand-craft approvals.
Prefer exact-amount approvals; never unlimited allowances.
Quotes expire — re-quote if execution is delayed; never reuse a stale quote.
Check source token and native gas balances before asking the user to confirm.
Rate limits: WOOFi 5 req/s; keep LayerZero status polling at ~4s intervals.
Never retry a failed transaction automatically. On revert, FAILED, or
UNKNOWN, report the tx hash / explorerUrl and the decoded cause if available,
then wait for the user.
State chain, token, amount, fees, spender, and destination address before every
signature; re-verify guardrails against the freshest quote, not the original one.
Pre-release test gate
Before treating a deployment as production-ready, pass live tests for:
same-chain ERC-20→ERC-20; native→ERC-20 and ERC-20→native; cross-chain same-token
EVM→EVM; cross-chain token conversion; LayerZero-only EVM→Solana and Solana→EVM;
bridge-then-destination-swap; existing-allowance and approval-required paths;
insufficient token and insufficient gas; expired quote, reverted swap, failed bridge,
delayed destination; different source vs destination wallets; AA wallet returning only
user_operation_hash.
