postgresql

name	postgresql
description	PostgreSQL database documentation - SQL queries, database design, administration, performance tuning, and advanced features. Use when working with PostgreSQL databases, writing SQL, or managing database systems. Use when this capability is needed.
metadata	{"author":"ComeOnOliver"}

Postgresql Skill

Comprehensive assistance with postgresql development, generated from official documentation.

When to Use This Skill

This skill should be triggered when:

• Working with postgresql
• Asking about postgresql features or APIs
• Implementing postgresql solutions
• Debugging postgresql code
• Learning postgresql best practices

Quick Reference

Common Patterns

Pattern 1: 32.1. Database Connection Control Functions # 32.1.1. Connection Strings 32.1.2. Parameter Key Words The following functions deal with making a connection to a PostgreSQL backend server. An application program can have several backend connections open at one time. (One reason to do that is to access more than one database.) Each connection is represented by a PGconn object, which is obtained from the function PQconnectdb, PQconnectdbParams, or PQsetdbLogin. Note that these functions will always return a non-null object pointer, unless perhaps there is too little memory even to allocate the PGconn object. The PQstatus function should be called to check the return value for a successful connection before queries are sent via the connection object. Warning If untrusted users have access to a database that has not adopted a secure schema usage pattern, begin each session by removing publicly-writable schemas from search_path. One can set parameter key word options to value -csearch_path=. Alternately, one can issue PQexec(conn, "SELECT pg_catalog.set_config('search_path', '', false)") after connecting. This consideration is not specific to libpq; it applies to every interface for executing arbitrary SQL commands. Warning On Unix, forking a process with open libpq connections can lead to unpredictable results because the parent and child processes share the same sockets and operating system resources. For this reason, such usage is not recommended, though doing an exec from the child process to load a new executable is safe. PQconnectdbParams # Makes a new connection to the database server. PGconn *PQconnectdbParams(const char * const *keywords, const char * const *values, int expand_dbname); This function opens a new database connection using the parameters taken from two NULL-terminated arrays. The first, keywords, is defined as an array of strings, each one being a key word. The second, values, gives the value for each key word. Unlike PQsetdbLogin below, the parameter set can be extended without changing the function signature, so use of this function (or its nonblocking analogs PQconnectStartParams and PQconnectPoll) is preferred for new application programming. The currently recognized parameter key words are listed in Section 32.1.2. The passed arrays can be empty to use all default parameters, or can contain one or more parameter settings. They must be matched in length. Processing will stop at the first NULL entry in the keywords array. Also, if the values entry associated with a non-NULL keywords entry is NULL or an empty string, that entry is ignored and processing continues with the next pair of array entries. When expand_dbname is non-zero, the value for the first dbname key word is checked to see if it is a connection string. If so, it is “expanded” into the individual connection parameters extracted from the string. The value is considered to be a connection string, rather than just a database name, if it contains an equal sign (=) or it begins with a URI scheme designator. (More details on connection string formats appear in Section 32.1.1.) Only the first occurrence of dbname is treated in this way; any subsequent dbname parameter is processed as a plain database name. In general the parameter arrays are processed from start to end. If any key word is repeated, the last value (that is not NULL or empty) is used. This rule applies in particular when a key word found in a connection string conflicts with one appearing in the keywords array. Thus, the programmer may determine whether array entries can override or be overridden by values taken from a connection string. Array entries appearing before an expanded dbname entry can be overridden by fields of the connection string, and in turn those fields are overridden by array entries appearing after dbname (but, again, only if those entries supply non-empty values). After processing all the array entries and any expanded connection string, any connection parameters that remain unset are filled with default values. If an unset parameter's corresponding environment variable (see Section 32.15) is set, its value is used. If the environment variable is not set either, then the parameter's built-in default value is used. PQconnectdb # Makes a new connection to the database server. PGconn *PQconnectdb(const char *conninfo); This function opens a new database connection using the parameters taken from the string conninfo. The passed string can be empty to use all default parameters, or it can contain one or more parameter settings separated by whitespace, or it can contain a URI. See Section 32.1.1 for details. PQsetdbLogin # Makes a new connection to the database server. PGconn *PQsetdbLogin(const char *pghost, const char *pgport, const char *pgoptions, const char *pgtty, const char *dbName, const char *login, const char *pwd); This is the predecessor of PQconnectdb with a fixed set of parameters. It has the same functionality except that the missing parameters will always take on default values. Write NULL or an empty string for any one of the fixed parameters that is to be defaulted. If the dbName contains an = sign or has a valid connection URI prefix, it is taken as a conninfo string in exactly the same way as if it had been passed to PQconnectdb, and the remaining parameters are then applied as specified for PQconnectdbParams. pgtty is no longer used and any value passed will be ignored. PQsetdb # Makes a new connection to the database server. PGconn *PQsetdb(char *pghost, char *pgport, char *pgoptions, char *pgtty, char *dbName); This is a macro that calls PQsetdbLogin with null pointers for the login and pwd parameters. It is provided for backward compatibility with very old programs. PQconnectStartParamsPQconnectStartPQconnectPoll # Make a connection to the database server in a nonblocking manner. PGconn *PQconnectStartParams(const char * const *keywords, const char * const *values, int expand_dbname); PGconn *PQconnectStart(const char *conninfo); PostgresPollingStatusType PQconnectPoll(PGconn *conn); These three functions are used to open a connection to a database server such that your application's thread of execution is not blocked on remote I/O whilst doing so. The point of this approach is that the waits for I/O to complete can occur in the application's main loop, rather than down inside PQconnectdbParams or PQconnectdb, and so the application can manage this operation in parallel with other activities. With PQconnectStartParams, the database connection is made using the parameters taken from the keywords and values arrays, and controlled by expand_dbname, as described above for PQconnectdbParams. With PQconnectStart, the database connection is made using the parameters taken from the string conninfo as described above for PQconnectdb. Neither PQconnectStartParams nor PQconnectStart nor PQconnectPoll will block, so long as a number of restrictions are met: The hostaddr parameter must be used appropriately to prevent DNS queries from being made. See the documentation of this parameter in Section 32.1.2 for details. If you call PQtrace, ensure that the stream object into which you trace will not block. You must ensure that the socket is in the appropriate state before calling PQconnectPoll, as described below. To begin a nonblocking connection request, call PQconnectStart or PQconnectStartParams. If the result is null, then libpq has been unable to allocate a new PGconn structure. Otherwise, a valid PGconn pointer is returned (though not yet representing a valid connection to the database). Next call PQstatus(conn). If the result is CONNECTION_BAD, the connection attempt has already failed, typically because of invalid connection parameters. If PQconnectStart or PQconnectStartParams succeeds, the next stage is to poll libpq so that it can proceed with the connection sequence. Use PQsocket(conn) to obtain the descriptor of the socket underlying the database connection. (Caution: do not assume that the socket remains the same across PQconnectPoll calls.) Loop thus: If PQconnectPoll(conn) last returned PGRES_POLLING_READING, wait until the socket is ready to read (as indicated by select(), poll(), or similar system function). Note that PQsocketPoll can help reduce boilerplate by abstracting the setup of select(2) or poll(2) if it is available on your system. Then call PQconnectPoll(conn) again. Conversely, if PQconnectPoll(conn) last returned PGRES_POLLING_WRITING, wait until the socket is ready to write, then call PQconnectPoll(conn) again. On the first iteration, i.e., if you have yet to call PQconnectPoll, behave as if it last returned PGRES_POLLING_WRITING. Continue this loop until PQconnectPoll(conn) returns PGRES_POLLING_FAILED, indicating the connection procedure has failed, or PGRES_POLLING_OK, indicating the connection has been successfully made. At any time during connection, the status of the connection can be checked by calling PQstatus. If this call returns CONNECTION_BAD, then the connection procedure has failed; if the call returns CONNECTION_OK, then the connection is ready. Both of these states are equally detectable from the return value of PQconnectPoll, described above. Other states might also occur during (and only during) an asynchronous connection procedure. These indicate the current stage of the connection procedure and might be useful to provide feedback to the user for example. These statuses are: CONNECTION_STARTED # Waiting for connection to be made. CONNECTION_MADE # Connection OK; waiting to send. CONNECTION_AWAITING_RESPONSE # Waiting for a response from the server. CONNECTION_AUTH_OK # Received authentication; waiting for backend start-up to finish. CONNECTION_SSL_STARTUP # Negotiating SSL encryption. CONNECTION_GSS_STARTUP # Negotiating GSS encryption. CONNECTION_CHECK_WRITABLE # Checking if connection is able to handle write transactions. CONNECTION_CHECK_STANDBY # Checking if connection is to a server in standby mode. CONNECTION_CONSUME # Consuming any remaining response messages on connection. Note that, although these constants will remain (in order to maintain compatibility), an application should never rely upon these occurring in a particular order, or at all, or on the status always being one of these documented values. An application might do something like this: switch(PQstatus(conn)) { case CONNECTION_STARTED: feedback = "Connecting..."; break; case CONNECTION_MADE: feedback = "Connected to server..."; break; . . . default: feedback = "Connecting..."; } The connect_timeout connection parameter is ignored when using PQconnectPoll; it is the application's responsibility to decide whether an excessive amount of time has elapsed. Otherwise, PQconnectStart followed by a PQconnectPoll loop is equivalent to PQconnectdb. Note that when PQconnectStart or PQconnectStartParams returns a non-null pointer, you must call PQfinish when you are finished with it, in order to dispose of the structure and any associated memory blocks. This must be done even if the connection attempt fails or is abandoned. PQsocketPoll # Poll a connection's underlying socket descriptor retrieved with PQsocket. The primary use of this function is iterating through the connection sequence described in the documentation of PQconnectStartParams. typedef int64_t pg_usec_time_t; int PQsocketPoll(int sock, int forRead, int forWrite, pg_usec_time_t end_time); This function performs polling of a file descriptor, optionally with a timeout. If forRead is nonzero, the function will terminate when the socket is ready for reading. If forWrite is nonzero, the function will terminate when the socket is ready for writing. The timeout is specified by end_time, which is the time to stop waiting expressed as a number of microseconds since the Unix epoch (that is, time_t times 1 million). Timeout is infinite if end_time is -1. Timeout is immediate (no blocking) if end_time is 0 (or indeed, any time before now). Timeout values can be calculated conveniently by adding the desired number of microseconds to the result of PQgetCurrentTimeUSec. Note that the underlying system calls may have less than microsecond precision, so that the actual delay may be imprecise. The function returns a value greater than 0 if the specified condition is met, 0 if a timeout occurred, or -1 if an error occurred. The error can be retrieved by checking the errno(3) value. In the event both forRead and forWrite are zero, the function immediately returns a timeout indication. PQsocketPoll is implemented using either poll(2) or select(2), depending on platform. See POLLIN and POLLOUT from poll(2), or readfds and writefds from select(2), for more information. PQconndefaults # Returns the default connection options. PQconninfoOption *PQconndefaults(void); typedef struct { char keyword; / The keyword of the option */ char envvar; / Fallback environment variable name */ char compiled; / Fallback compiled in default value */ char val; / Option's current value, or NULL */ char label; / Label for field in connect dialog / char dispchar; / Indicates how to display this field in a connect dialog. Values are: "" Display entered value as is "" Password field - hide value "D" Debug option - don't show by default / int dispsize; / Field size in characters for dialog */ } PQconninfoOption; Returns a connection options array. This can be used to determine all possible PQconnectdb options and their current default values. The return value points to an array of PQconninfoOption structures, which ends with an entry having a null keyword pointer. The null pointer is returned if memory could not be allocated. Note that the current default values (val fields) will depend on environment variables and other context. A missing or invalid service file will be silently ignored. Callers must treat the connection options data as read-only. After processing the options array, free it by passing it to PQconninfoFree. If this is not done, a small amount of memory is leaked for each call to PQconndefaults. PQconninfo # Returns the connection options used by a live connection. PQconninfoOption *PQconninfo(PGconn *conn); Returns a connection options array. This can be used to determine all possible PQconnectdb options and the values that were used to connect to the server. The return value points to an array of PQconninfoOption structures, which ends with an entry having a null keyword pointer. All notes above for PQconndefaults also apply to the result of PQconninfo. PQconninfoParse # Returns parsed connection options from the provided connection string. PQconninfoOption *PQconninfoParse(const char *conninfo, char **errmsg); Parses a connection string and returns the resulting options as an array; or returns NULL if there is a problem with the connection string. This function can be used to extract the PQconnectdb options in the provided connection string. The return value points to an array of PQconninfoOption structures, which ends with an entry having a null keyword pointer. All legal options will be present in the result array, but the PQconninfoOption for any option not present in the connection string will have val set to NULL; default values are not inserted. If errmsg is not NULL, then *errmsg is set to NULL on success, else to a malloc'd error string explaining the problem. (It is also possible for *errmsg to be set to NULL and the function to return NULL; this indicates an out-of-memory condition.) After processing the options array, free it by passing it to PQconninfoFree. If this is not done, some memory is leaked for each call to PQconninfoParse. Conversely, if an error occurs and errmsg is not NULL, be sure to free the error string using PQfreemem. PQfinish # Closes the connection to the server. Also frees memory used by the PGconn object. void PQfinish(PGconn *conn); Note that even if the server connection attempt fails (as indicated by PQstatus), the application should call PQfinish to free the memory used by the PGconn object. The PGconn pointer must not be used again after PQfinish has been called. PQreset # Resets the communication channel to the server. void PQreset(PGconn *conn); This function will close the connection to the server and attempt to establish a new connection, using all the same parameters previously used. This might be useful for error recovery if a working connection is lost. PQresetStartPQresetPoll # Reset the communication channel to the server, in a nonblocking manner. int PQresetStart(PGconn *conn); PostgresPollingStatusType PQresetPoll(PGconn *conn); These functions will close the connection to the server and attempt to establish a new connection, using all the same parameters previously used. This can be useful for error recovery if a working connection is lost. They differ from PQreset (above) in that they act in a nonblocking manner. These functions suffer from the same restrictions as PQconnectStartParams, PQconnectStart and PQconnectPoll. To initiate a connection reset, call PQresetStart. If it returns 0, the reset has failed. If it returns 1, poll the reset using PQresetPoll in exactly the same way as you would create the connection using PQconnectPoll. PQpingParams # PQpingParams reports the status of the server. It accepts connection parameters identical to those of PQconnectdbParams, described above. It is not necessary to supply correct user name, password, or database name values to obtain the server status; however, if incorrect values are provided, the server will log a failed connection attempt. PGPing PQpingParams(const char * const *keywords, const char * const *values, int expand_dbname); The function returns one of the following values: PQPING_OK # The server is running and appears to be accepting connections. PQPING_REJECT # The server is running but is in a state that disallows connections (startup, shutdown, or crash recovery). PQPING_NO_RESPONSE # The server could not be contacted. This might indicate that the server is not running, or that there is something wrong with the given connection parameters (for example, wrong port number), or that there is a network connectivity problem (for example, a firewall blocking the connection request). PQPING_NO_ATTEMPT # No attempt was made to contact the server, because the supplied parameters were obviously incorrect or there was some client-side problem (for example, out of memory). PQping # PQping reports the status of the server. It accepts connection parameters identical to those of PQconnectdb, described above. It is not necessary to supply correct user name, password, or database name values to obtain the server status; however, if incorrect values are provided, the server will log a failed connection attempt. PGPing PQping(const char *conninfo); The return values are the same as for PQpingParams. PQsetSSLKeyPassHook_OpenSSL # PQsetSSLKeyPassHook_OpenSSL lets an application override libpq's default handling of encrypted client certificate key files using sslpassword or interactive prompting. void PQsetSSLKeyPassHook_OpenSSL(PQsslKeyPassHook_OpenSSL_type hook); The application passes a pointer to a callback function with signature: int callback_fn(char *buf, int size, PGconn *conn); which libpq will then call instead of its default PQdefaultSSLKeyPassHook_OpenSSL handler. The callback should determine the password for the key and copy it to result-buffer buf of size size. The string in buf must be null-terminated. The callback must return the length of the password stored in buf excluding the null terminator. On failure, the callback should set buf[0] = '\0' and return 0. See PQdefaultSSLKeyPassHook_OpenSSL in libpq's source code for an example. If the user specified an explicit key location, its path will be in conn->sslkey when the callback is invoked. This will be empty if the default key path is being used. For keys that are engine specifiers, it is up to engine implementations whether they use the OpenSSL password callback or define their own handling. The app callback may choose to delegate unhandled cases to PQdefaultSSLKeyPassHook_OpenSSL, or call it first and try something else if it returns 0, or completely override it. The callback must not escape normal flow control with exceptions, longjmp(...), etc. It must return normally. PQgetSSLKeyPassHook_OpenSSL # PQgetSSLKeyPassHook_OpenSSL returns the current client certificate key password hook, or NULL if none has been set. PQsslKeyPassHook_OpenSSL_type PQgetSSLKeyPassHook_OpenSSL(void); 32.1.1. Connection Strings # Several libpq functions parse a user-specified string to obtain connection parameters. There are two accepted formats for these strings: plain keyword/value strings and URIs. URIs generally follow RFC 3986, except that multi-host connection strings are allowed as further described below. 32.1.1.1. Keyword/Value Connection Strings # In the keyword/value format, each parameter setting is in the form keyword = value, with space(s) between settings. Spaces around a setting's equal sign are optional. To write an empty value, or a value containing spaces, surround it with single quotes, for example keyword = 'a value'. Single quotes and backslashes within a value must be escaped with a backslash, i.e., ' and \. Example: host=localhost port=5432 dbname=mydb connect_timeout=10 The recognized parameter key words are listed in Section 32.1.2. 32.1.1.2. Connection URIs # The general form for a connection URI is: postgresql://[userspec@][hostspec][/dbname][?paramspec] where userspec is: user[:password] and hostspec is: [host][:port][,...] and paramspec is: name=value[&...] The URI scheme designator can be either postgresql:// or postgres://. Each of the remaining URI parts is optional. The following examples illustrate valid URI syntax: postgresql:// postgresql://localhost postgresql://localhost:5433 postgresql://localhost/mydb postgresql://user@localhost postgresql://user:secret@localhost postgresql://other@localhost/otherdb?connect_timeout=10&application_name=myapp postgresql://host1:123,host2:456/somedb?target_session_attrs=any&application_name=myapp Values that would normally appear in the hierarchical part of the URI can alternatively be given as named parameters. For example: postgresql:///mydb?host=localhost&port=5433 All named parameters must match key words listed in Section 32.1.2, except that for compatibility with JDBC connection URIs, instances of ssl=true are translated into sslmode=require. The connection URI needs to be encoded with percent-encoding if it includes symbols with special meaning in any of its parts. Here is an example where the equal sign (=) is replaced with %3D and the space character with %20: postgresql://user@localhost:5433/mydb?options=-c%20synchronous_commit%3Doff The host part may be either a host name or an IP address. To specify an IPv6 address, enclose it in square brackets: postgresql://[2001:db8::1234]/database The host part is interpreted as described for the parameter host. In particular, a Unix-domain socket connection is chosen if the host part is either empty or looks like an absolute path name, otherwise a TCP/IP connection is initiated. Note, however, that the slash is a reserved character in the hierarchical part of the URI. So, to specify a non-standard Unix-domain socket directory, either omit the host part of the URI and specify the host as a named parameter, or percent-encode the path in the host part of the URI: postgresql:///dbname?host=/var/lib/postgresql postgresql://%2Fvar%2Flib%2Fpostgresql/dbname It is possible to specify multiple host components, each with an optional port component, in a single URI. A URI of the form postgresql://host1:port1,host2:port2,host3:port3/ is equivalent to a connection string of the form host=host1,host2,host3 port=port1,port2,port3. As further described below, each host will be tried in turn until a connection is successfully established. 32.1.1.3. Specifying Multiple Hosts # It is possible to specify multiple hosts to connect to, so that they are tried in the given order. In the Keyword/Value format, the host, hostaddr, and port options accept comma-separated lists of values. The same number of elements must be given in each option that is specified, such that e.g., the first hostaddr corresponds to the first host name, the second hostaddr corresponds to the second host name, and so forth. As an exception, if only one port is specified, it applies to all the hosts. In the connection URI format, you can list multiple host:port pairs separated by commas in the host component of the URI. In either format, a single host name can translate to multiple network addresses. A common example of this is a host that has both an IPv4 and an IPv6 address. When multiple hosts are specified, or when a single host name is translated to multiple addresses, all the hosts and addresses will be tried in order, until one succeeds. If none of the hosts can be reached, the connection fails. If a connection is established successfully, but authentication fails, the remaining hosts in the list are not tried. If a password file is used, you can have different passwords for different hosts. All the other connection options are the same for every host in the list; it is not possible to e.g., specify different usernames for different hosts. 32.1.2. Parameter Key Words # The currently recognized parameter key words are: host # Name of host to connect to. If a host name looks like an absolute path name, it specifies Unix-domain communication rather than TCP/IP communication; the value is the name of the directory in which the socket file is stored. (On Unix, an absolute path name begins with a slash. On Windows, paths starting with drive letters are also recognized.) If the host name starts with @, it is taken as a Unix-domain socket in the abstract namespace (currently supported on Linux and Windows). The default behavior when host is not specified, or is empty, is to connect to a Unix-domain socket in /tmp (or whatever socket directory was specified when PostgreSQL was built). On Windows, the default is to connect to localhost. A comma-separated list of host names is also accepted, in which case each host name in the list is tried in order; an empty item in the list selects the default behavior as explained above. See Section 32.1.1.3 for details. hostaddr # Numeric IP address of host to connect to. This should be in the standard IPv4 address format, e.g., 172.28.40.9. If your machine supports IPv6, you can also use those addresses. TCP/IP communication is always used when a nonempty string is specified for this parameter. If this parameter is not specified, the value of host will be looked up to find the corresponding IP address — or, if host specifies an IP address, that value will be used directly. Using hostaddr allows the application to avoid a host name look-up, which might be important in applications with time constraints. However, a host name is required for GSSAPI or SSPI authentication methods, as well as for verify-full SSL certificate verification. The following rules are used: If host is specified without hostaddr, a host name lookup occurs. (When using PQconnectPoll, the lookup occurs when PQconnectPoll first considers this host name, and it may cause PQconnectPoll to block for a significant amount of time.) If hostaddr is specified without host, the value for hostaddr gives the server network address. The connection attempt will fail if the authentication method requires a host name. If both host and hostaddr are specified, the value for hostaddr gives the server network address. The value for host is ignored unless the authentication method requires it, in which case it will be used as the host name. Note that authentication is likely to fail if host is not the name of the server at network address hostaddr. Also, when both host and hostaddr are specified, host is used to identify the connection in a password file (see Section 32.16). A comma-separated list of hostaddr values is also accepted, in which case each host in the list is tried in order. An empty item in the list causes the corresponding host name to be used, or the default host name if that is empty as well. See Section 32.1.1.3 for details. Without either a host name or host address, libpq will connect using a local Unix-domain socket; or on Windows, it will attempt to connect to localhost. port # Port number to connect to at the server host, or socket file name extension for Unix-domain connections. If multiple hosts were given in the host or hostaddr parameters, this parameter may specify a comma-separated list of ports of the same length as the host list, or it may specify a single port number to be used for all hosts. An empty string, or an empty item in a comma-separated list, specifies the default port number established when PostgreSQL was built. dbname # The database name. Defaults to be the same as the user name. In certain contexts, the value is checked for extended formats; see Section 32.1.1 for more details on those. user # PostgreSQL user name to connect as. Defaults to be the same as the operating system name of the user running the application. password # Password to be used if the server demands password authentication. passfile # Specifies the name of the file used to store passwords (see Section 32.16). Defaults to ~/.pgpass, or %APPDATA%\postgresql\pgpass.conf on Microsoft Windows. (No error is reported if this file does not exist.) require_auth # Specifies the authentication method that the client requires from the server. If the server does not use the required method to authenticate the client, or if the authentication handshake is not fully completed by the server, the connection will fail. A comma-separated list of methods may also be provided, of which the server must use exactly one in order for the connection to succeed. By default, any authentication method is accepted, and the server is free to skip authentication altogether. Methods may be negated with the addition of a ! prefix, in which case the server must not attempt the listed method; any other method is accepted, and the server is free not to authenticate the client at all. If a comma-separated list is provided, the server may not attempt any of the listed negated methods. Negated and non-negated forms may not be combined in the same setting. As a final special case, the none method requires the server not to use an authentication challenge. (It may also be negated, to require some form of authentication.) The following methods may be specified: password The server must request plaintext password authentication. md5 The server must request MD5 hashed password authentication. Warning Support for MD5-encrypted passwords is deprecated and will be removed in a future release of PostgreSQL. Refer to Section 20.5 for details about migrating to another password type. gss The server must either request a Kerberos handshake via GSSAPI or establish a GSS-encrypted channel (see also gssencmode). sspi The server must request Windows SSPI authentication. scram-sha-256 The server must successfully complete a SCRAM-SHA-256 authentication exchange with the client. oauth The server must request an OAuth bearer token from the client. none The server must not prompt the client for an authentication exchange. (This does not prohibit client certificate authentication via TLS, nor GSS authentication via its encrypted transport.) channel_binding # This option controls the client's use of channel binding. A setting of require means that the connection must employ channel binding, prefer means that the client will choose channel binding if available, and disable prevents the use of channel binding. The default is prefer if PostgreSQL is compiled with SSL support; otherwise the default is disable. Channel binding is a method for the server to authenticate itself to the client. It is only supported over SSL connections with PostgreSQL 11 or later servers using the SCRAM authentication method. connect_timeout # Maximum time to wait while connecting, in seconds (write as a decimal integer, e.g., 10). Zero, negative, or not specified means wait indefinitely. This timeout applies separately to each host name or IP address. For example, if you specify two hosts and connect_timeout is 5, each host will time out if no connection is made within 5 seconds, so the total time spent waiting for a connection might be up to 10 seconds. client_encoding # This sets the client_encoding configuration parameter for this connection. In addition to the values accepted by the corresponding server option, you can use auto to determine the right encoding from the current locale in the client (LC_CTYPE environment variable on Unix systems). options # Specifies command-line options to send to the server at connection start. For example, setting this to -c geqo=off or --geqo=off sets the session's value of the geqo parameter to off. Spaces within this string are considered to separate command-line arguments, unless escaped with a backslash (); write \ to represent a literal backslash. For a detailed discussion of the available options, consult Chapter 19. application_name # Specifies a value for the application_name configuration parameter. fallback_application_name # Specifies a fallback value for the application_name configuration parameter. This value will be used if no value has been given for application_name via a connection parameter or the PGAPPNAME environment variable. Specifying a fallback name is useful in generic utility programs that wish to set a default application name but allow it to be overridden by the user. keepalives # Controls whether client-side TCP keepalives are used. The default value is 1, meaning on, but you can change this to 0, meaning off, if keepalives are not wanted. This parameter is ignored for connections made via a Unix-domain socket. keepalives_idle # Controls the number of seconds of inactivity after which TCP should send a keepalive message to the server. A value of zero uses the system default. This parameter is ignored for connections made via a Unix-domain socket, or if keepalives are disabled. It is only supported on systems where TCP_KEEPIDLE or an equivalent socket option is available, and on Windows; on other systems, it has no effect. keepalives_interval # Controls the number of seconds after which a TCP keepalive message that is not acknowledged by the server should be retransmitted. A value of zero uses the system default. This parameter is ignored for connections made via a Unix-domain socket, or if keepalives are disabled. It is only supported on systems where TCP_KEEPINTVL or an equivalent socket option is available, and on Windows; on other systems, it has no effect. keepalives_count # Controls the number of TCP keepalives that can be lost before the client's connection to the server is considered dead. A value of zero uses the system default. This parameter is ignored for connections made via a Unix-domain socket, or if keepalives are disabled. It is only supported on systems where TCP_KEEPCNT or an equivalent socket option is available; on other systems, it has no effect. tcp_user_timeout # Controls the number of milliseconds that transmitted data may remain unacknowledged before a connection is forcibly closed. A value of zero uses the system default. This parameter is ignored for connections made via a Unix-domain socket. It is only supported on systems where TCP_USER_TIMEOUT is available; on other systems, it has no effect. replication # This option determines whether the connection should use the replication protocol instead of the normal protocol. This is what PostgreSQL replication connections as well as tools such as pg_basebackup use internally, but it can also be used by third-party applications. For a description of the replication protocol, consult Section 54.4. The following values, which are case-insensitive, are supported: true, on, yes, 1 The connection goes into physical replication mode. database The connection goes into logical replication mode, connecting to the database specified in the dbname parameter. false, off, no, 0 The connection is a regular one, which is the default behavior. In physical or logical replication mode, only the simple query protocol can be used. gssencmode # This option determines whether or with what priority a secure GSS TCP/IP connection will be negotiated with the server. There are three modes: disable only try a non-GSSAPI-encrypted connection prefer (default) if there are GSSAPI credentials present (i.e., in a credentials cache), first try a GSSAPI-encrypted connection; if that fails or there are no credentials, try a non-GSSAPI-encrypted connection. This is the default when PostgreSQL has been compiled with GSSAPI support. require only try a GSSAPI-encrypted connection gssencmode is ignored for Unix domain socket communication. If PostgreSQL is compiled without GSSAPI support, using the require option will cause an error, while prefer will be accepted but libpq will not actually attempt a GSSAPI-encrypted connection. sslmode # This option determines whether or with what priority a secure SSL TCP/IP connection will be negotiated with the server. There are six modes: disable only try a non-SSL connection allow first try a non-SSL connection; if that fails, try an SSL connection prefer (default) first try an SSL connection; if that fails, try a non-SSL connection require only try an SSL connection. If a root CA file is present, verify the certificate in the same way as if verify-ca was specified verify-ca only try an SSL connection, and verify that the server certificate is issued by a trusted certificate authority (CA) verify-full only try an SSL connection, verify that the server certificate is issued by a trusted CA and that the requested server host name matches that in the certificate See Section 32.19 for a detailed description of how these options work. sslmode is ignored for Unix domain socket communication. If PostgreSQL is compiled without SSL support, using options require, verify-ca, or verify-full will cause an error, while options allow and prefer will be accepted but libpq will not actually attempt an SSL connection. Note that if GSSAPI encryption is possible, that will be used in preference to SSL encryption, regardless of the value of sslmode. To force use of SSL encryption in an environment that has working GSSAPI infrastructure (such as a Kerberos server), also set gssencmode to disable. requiressl # This option is deprecated in favor of the sslmode setting. If set to 1, an SSL connection to the server is required (this is equivalent to sslmode require). libpq will then refuse to connect if the server does not accept an SSL connection. If set to 0 (default), libpq will negotiate the connection type with the server (equivalent to sslmode prefer). This option is only available if PostgreSQL is compiled with SSL support. sslnegotiation # This option controls how SSL encryption is negotiated with the server, if SSL is used. In the default postgres mode, the client first asks the server if SSL is supported. In direct mode, the client starts the standard SSL handshake directly after establishing the TCP/IP connection. Traditional PostgreSQL protocol negotiation is the most flexible with different server configurations. If the server is known to support direct SSL connections then the latter requires one fewer round trip reducing connection latency and also allows the use of protocol agnostic SSL network tools. The direct SSL option was introduced in PostgreSQL version 17. postgres perform PostgreSQL protocol negotiation. This is the default if the option is not provided. direct start SSL handshake directly after establishing the TCP/IP connection. This is only allowed with sslmode=require or higher, because the weaker settings could lead to unintended fallback to plaintext authentication when the server does not support direct SSL handshake. sslcompression # If set to 1, data sent over SSL connections will be compressed. If set to 0, compression will be disabled. The default is 0. This parameter is ignored if a connection without SSL is made. SSL compression is nowadays considered insecure and its use is no longer recommended. OpenSSL 1.1.0 disabled compression by default, and many operating system distributions disabled it in prior versions as well, so setting this parameter to on will not have any effect if the server does not accept compression. PostgreSQL 14 disabled compression completely in the backend. If security is not a primary concern, compression can improve throughput if the network is the bottleneck. Disabling compression can improve response time and throughput if CPU performance is the limiting factor. sslcert # This parameter specifies the file name of the client SSL certificate, replacing the default ~/.postgresql/postgresql.crt. This parameter is ignored if an SSL connection is not made. sslkey # This parameter specifies the location for the secret key used for the client certificate. It can either specify a file name that will be used instead of the default ~/.postgresql/postgresql.key, or it can specify a key obtained from an external “engine” (engines are OpenSSL loadable modules). An external engine specification should consist of a colon-separated engine name and an engine-specific key identifier. This parameter is ignored if an SSL connection is not made. sslkeylogfile # This parameter specifies the location where libpq will log keys used in this SSL context. This is useful for debugging PostgreSQL protocol interactions or client connections using network inspection tools like Wireshark. This parameter is ignored if an SSL connection is not made, or if LibreSSL is used (LibreSSL does not support key logging). Keys are logged using the NSS format. Warning Key logging will expose potentially sensitive information in the keylog file. Keylog files should be handled with the same care as sslkey files. sslpassword # This parameter specifies the password for the secret key specified in sslkey, allowing client certificate private keys to be stored in encrypted form on disk even when interactive passphrase input is not practical. Specifying this parameter with any non-empty value suppresses the Enter PEM pass phrase: prompt that OpenSSL will emit by default when an encrypted client certificate key is provided to libpq. If the key is not encrypted this parameter is ignored. The parameter has no effect on keys specified by OpenSSL engines unless the engine uses the OpenSSL password callback mechanism for prompts. There is no environment variable equivalent to this option, and no facility for looking it up in .pgpass. It can be used in a service file connection definition. Users with more sophisticated uses should consider using OpenSSL engines and tools like PKCS#11 or USB crypto offload devices. sslcertmode # This option determines whether a client certificate may be sent to the server, and whether the server is required to request one. There are three modes: disable A client certificate is never sent, even if one is available (default location or provided via sslcert). allow (default) A certificate may be sent, if the server requests one and the client has one to send. require The server must request a certificate. The connection will fail if the client does not send a certificate and the server successfully authenticates the client anyway. Note sslcertmode=require doesn't add any additional security, since there is no guarantee that the server is validating the certificate correctly; PostgreSQL servers generally request TLS certificates from clients whether they validate them or not. The option may be useful when troubleshooting more complicated TLS setups. sslrootcert # This parameter specifies the name of a file containing SSL certificate authority (CA) certificate(s). If the file exists, the server's certificate will be verified to be signed by one of these authorities. The default is ~/.postgresql/root.crt. The special value system may be specified instead, in which case the trusted CA roots from the SSL implementation will be loaded. The exact locations of these root certificates differ by SSL implementation and platform. For OpenSSL in particular, the locations may be further modified by the SSL_CERT_DIR and SSL_CERT_FILE environment variables. Note When using sslrootcert=system, the default sslmode is changed to verify-full, and any weaker setting will result in an error. In most cases it is trivial for anyone to obtain a certificate trusted by the system for a hostname they control, rendering verify-ca and all weaker modes useless. The magic system value will take precedence over a local certificate file with the same name. If for some reason you find yourself in this situation, use an alternative path like sslrootcert=./system instead. sslcrl # This parameter specifies the file name of the SSL server certificate revocation list (CRL). Certificates listed in this file, if it exists, will be rejected while attempting to authenticate the server's certificate. If neither sslcrl nor sslcrldir is set, this setting is taken as ~/.postgresql/root.crl. sslcrldir # This parameter specifies the directory name of the SSL server certificate revocation list (CRL). Certificates listed in the files in this directory, if it exists, will be rejected while attempting to authenticate the server's certificate. The directory needs to be prepared with the OpenSSL command openssl rehash or c_rehash. See its documentation for details. Both sslcrl and sslcrldir can be specified together. sslsni # If set to 1 (default), libpq sets the TLS extension “Server Name Indication” (SNI) on SSL-enabled connections. By setting this parameter to 0, this is turned off. The Server Name Indication can be used by SSL-aware proxies to route connections without having to decrypt the SSL stream. (Note that unless the proxy is aware of the PostgreSQL protocol handshake this would require setting sslnegotiation to direct.) However, SNI makes the destination host name appear in cleartext in the network traffic, so it might be undesirable in some cases. requirepeer # This parameter specifies the operating-system user name of the server, for example requirepeer=postgres. When making a Unix-domain socket connection, if this parameter is set, the client checks at the beginning of the connection that the server process is running under the specified user name; if it is not, the connection is aborted with an error. This parameter can be used to provide server authentication similar to that available with SSL certificates on TCP/IP connections. (Note that if the Unix-domain socket is in /tmp or another publicly writable location, any user could start a server listening there. Use this parameter to ensure that you are connected to a server run by a trusted user.) This option is only supported on platforms for which the peer authentication method is implemented; see Section 20.9. ssl_min_protocol_version # This parameter specifies the minimum SSL/TLS protocol version to allow for the connection. Valid values are TLSv1, TLSv1.1, TLSv1.2 and TLSv1.3. The supported protocols depend on the version of OpenSSL used, older versions not supporting the most modern protocol versions. If not specified, the default is TLSv1.2, which satisfies industry best practices as of this writing. ssl_max_protocol_version # This parameter specifies the maximum SSL/TLS protocol version to allow for the connection. Valid values are TLSv1, TLSv1.1, TLSv1.2 and TLSv1.3. The supported protocols depend on the version of OpenSSL used, older versions not supporting the most modern protocol versions. If not set, this parameter is ignored and the connection will use the maximum bound defined by the backend, if set. Setting the maximum protocol version is mainly useful for testing or if some component has issues working with a newer protocol. min_protocol_version # Specifies the minimum protocol version to allow for the connection. The default is to allow any version of the PostgreSQL protocol supported by libpq, which currently means 3.0. If the server does not support at least this protocol version the connection will be closed. The current supported values are 3.0, 3.2, and latest. The latest value is equivalent to the latest protocol version supported by the libpq version being used, which is currently 3.2. max_protocol_version # Specifies the protocol version to request from the server. The default is to use version 3.0 of the PostgreSQL protocol, unless the connection string specifies a feature that relies on a higher protocol version, in which case the latest version supported by libpq is used. If the server does not support the protocol version requested by the client, the connection is automatically downgraded to a lower minor protocol version that the server supports. After the connection attempt has completed you can use PQprotocolVersion to find out which exact protocol version was negotiated. The current supported values are 3.0, 3.2, and latest. The latest value is equivalent to the latest protocol version supported by the libpq version being used, which is currently 3.2. krbsrvname # Kerberos service name to use when authenticating with GSSAPI. This must match the service name specified in the server configuration for Kerberos authentication to succeed. (See also Section 20.6.) The default value is normally postgres, but that can be changed when building PostgreSQL via the --with-krb-srvnam option of configure. In most environments, this parameter never needs to be changed. Some Kerberos implementations might require a different service name, such as Microsoft Active Directory which requires the service name to be in upper case (POSTGRES). gsslib # GSS library to use for GSSAPI authentication. Currently this is disregarded except on Windows builds that include both GSSAPI and SSPI support. In that case, set this to gssapi to cause libpq to use the GSSAPI library for authentication instead of the default SSPI. gssdelegation # Forward (delegate) GSS credentials to the server. The default is 0 which means credentials will not be forwarded to the server. Set this to 1 to have credentials forwarded when possible. scram_client_key # The base64-encoded SCRAM client key. This can be used by foreign-data wrappers or similar middleware to enable pass-through SCRAM authentication. See Section F.38.1.10 for one such implementation. It is not meant to be specified directly by users or client applications. scram_server_key # The base64-encoded SCRAM server key. This can be used by foreign-data wrappers or similar middleware to enable pass-through SCRAM authentication. See Section F.38.1.10 for one such implementation. It is not meant to be specified directly by users or client applications. service # Service name to use for additional parameters. It specifies a service name in pg_service.conf that holds additional connection parameters. This allows applications to specify only a service name so connection parameters can be centrally maintained. See Section 32.17. target_session_attrs # This option determines whether the session must have certain properties to be acceptable. It's typically used in combination with multiple host names to select the first acceptable alternative among several hosts. There are six modes: any (default) any successful connection is acceptable read-write session must accept read-write transactions by default (that is, the server must not be in hot standby mode and the default_transaction_read_only parameter must be off) read-only session must not accept read-write transactions by default (the converse) primary server must not be in hot standby mode standby server must be in hot standby mode prefer-standby first try to find a standby server, but if none of the listed hosts is a standby server, try again in any mode load_balance_hosts # Controls the order in which the client tries to connect to the available hosts and addresses. Once a connection attempt is successful no other hosts and addresses will be tried. This parameter is typically used in combination with multiple host names or a DNS record that returns multiple IPs. This parameter can be used in combination with target_session_attrs to, for example, load balance over standby servers only. Once successfully connected, subsequent queries on the returned connection will all be sent to the same server. There are currently two modes: disable (default) No load balancing across hosts is performed. Hosts are tried in the order in which they are provided and addresses are tried in the order they are received from DNS or a hosts file. random Hosts and addresses are tried in random order. This value is mostly useful when opening multiple connections at the same time, possibly from different machines. This way connections can be load balanced across multiple PostgreSQL servers. While random load balancing, due to its random nature, will almost never result in a completely uniform distribution, it statistically gets quite close. One important aspect here is that this algorithm uses two levels of random choices: First the hosts will be resolved in random order. Then secondly, before resolving the next host, all resolved addresses for the current host will be tried in random order. This behaviour can skew the amount of connections each node gets greatly in certain cases, for instance when some hosts resolve to more addresses than others. But such a skew can also be used on purpose, e.g. to increase the number of connections a larger server gets by providing its hostname multiple times in the host string. When using this value it's recommended to also configure a reasonable value for connect_timeout. Because then, if one of the nodes that are used for load balancing is not responding, a new node will be tried. oauth_issuer # The HTTPS URL of a trusted issuer to contact if the server requests an OAuth token for the connection. This parameter is required for all OAuth connections; it should exactly match the issuer setting in the server's HBA configuration. As part of the standard authentication handshake, libpq will ask the server for a discovery document: a URL providing a set of OAuth configuration parameters. The server must provide a URL that is directly constructed from the components of the oauth_issuer, and this value must exactly match the issuer identifier that is declared in the discovery document itself, or the connection will fail. This is required to prevent a class of "mix-up attacks" on OAuth clients. You may also explicitly set oauth_issuer to the /.well-known/ URI used for OAuth discovery. In this case, if the server asks for a different URL, the connection will fail, but a custom OAuth flow may be able to speed up the standard handshake by using previously cached tokens. (In this case, it is recommended that oauth_scope be set as well, since the client will not have a chance to ask the server for a correct scope setting, and the default scopes for a token may not be sufficient to connect.) libpq currently supports the following well-known endpoints: /.well-known/openid-configuration /.well-known/oauth-authorization-server Warning Issuers are highly privileged during the OAuth connection handshake. As a rule of thumb, if you would not trust the operator of a URL to handle access to your servers, or to impersonate you directly, that URL should not be trusted as an oauth_issuer. oauth_client_id # An OAuth 2.0 client identifier, as issued by the authorization server. If the PostgreSQL server requests an OAuth token for the connection (and if no custom OAuth hook is installed to provide one), then this parameter must be set; otherwise, the connection will fail. oauth_client_secret # The client password, if any, to use when contacting the OAuth authorization server. Whether this parameter is required or not is determined by the OAuth provider; "public" clients generally do not use a secret, whereas "confidential" clients generally do. oauth_scope # The scope of the access request sent to the authorization server, specified as a (possibly empty) space-separated list of OAuth scope identifiers. This parameter is optional and intended for advanced usage. Usually the client will obtain appropriate scope settings from the PostgreSQL server. If this parameter is used, the server's requested scope list will be ignored. This can prevent a less-trusted server from requesting inappropriate access scopes from the end user. However, if the client's scope setting does not contain the server's required scopes, the server is likely to reject the issued token, and the connection will fail. The meaning of an empty scope list is provider-dependent. An OAuth authorization server may choose to issue a token with "default scope", whatever that happens to be, or it may reject the token request entirely.

PGconn

Pattern 2: 32.1.1. Connection Strings # Several libpq functions parse a user-specified string to obtain connection parameters. There are two accepted formats for these strings: plain keyword/value strings and URIs. URIs generally follow RFC 3986, except that multi-host connection strings are allowed as further described below. 32.1.1.1. Keyword/Value Connection Strings # In the keyword/value format, each parameter setting is in the form keyword = value, with space(s) between settings. Spaces around a setting's equal sign are optional. To write an empty value, or a value containing spaces, surround it with single quotes, for example keyword = 'a value'. Single quotes and backslashes within a value must be escaped with a backslash, i.e., ' and \. Example: host=localhost port=5432 dbname=mydb connect_timeout=10 The recognized parameter key words are listed in Section 32.1.2. 32.1.1.2. Connection URIs # The general form for a connection URI is: postgresql://[userspec@][hostspec][/dbname][?paramspec] where userspec is: user[:password] and hostspec is: [host][:port][,...] and paramspec is: name=value[&...] The URI scheme designator can be either postgresql:// or postgres://. Each of the remaining URI parts is optional. The following examples illustrate valid URI syntax: postgresql:// postgresql://localhost postgresql://localhost:5433 postgresql://localhost/mydb postgresql://user@localhost postgresql://user:secret@localhost postgresql://other@localhost/otherdb?connect_timeout=10&application_name=myapp postgresql://host1:123,host2:456/somedb?target_session_attrs=any&application_name=myapp Values that would normally appear in the hierarchical part of the URI can alternatively be given as named parameters. For example: postgresql:///mydb?host=localhost&port=5433 All named parameters must match key words listed in Section 32.1.2, except that for compatibility with JDBC connection URIs, instances of ssl=true are translated into sslmode=require. The connection URI needs to be encoded with percent-encoding if it includes symbols with special meaning in any of its parts. Here is an example where the equal sign (=) is replaced with %3D and the space character with %20: postgresql://user@localhost:5433/mydb?options=-c%20synchronous_commit%3Doff The host part may be either a host name or an IP address. To specify an IPv6 address, enclose it in square brackets: postgresql://[2001:db8::1234]/database The host part is interpreted as described for the parameter host. In particular, a Unix-domain socket connection is chosen if the host part is either empty or looks like an absolute path name, otherwise a TCP/IP connection is initiated. Note, however, that the slash is a reserved character in the hierarchical part of the URI. So, to specify a non-standard Unix-domain socket directory, either omit the host part of the URI and specify the host as a named parameter, or percent-encode the path in the host part of the URI: postgresql:///dbname?host=/var/lib/postgresql postgresql://%2Fvar%2Flib%2Fpostgresql/dbname It is possible to specify multiple host components, each with an optional port component, in a single URI. A URI of the form postgresql://host1:port1,host2:port2,host3:port3/ is equivalent to a connection string of the form host=host1,host2,host3 port=port1,port2,port3. As further described below, each host will be tried in turn until a connection is successfully established. 32.1.1.3. Specifying Multiple Hosts # It is possible to specify multiple hosts to connect to, so that they are tried in the given order. In the Keyword/Value format, the host, hostaddr, and port options accept comma-separated lists of values. The same number of elements must be given in each option that is specified, such that e.g., the first hostaddr corresponds to the first host name, the second hostaddr corresponds to the second host name, and so forth. As an exception, if only one port is specified, it applies to all the hosts. In the connection URI format, you can list multiple host:port pairs separated by commas in the host component of the URI. In either format, a single host name can translate to multiple network addresses. A common example of this is a host that has both an IPv4 and an IPv6 address. When multiple hosts are specified, or when a single host name is translated to multiple addresses, all the hosts and addresses will be tried in order, until one succeeds. If none of the hosts can be reached, the connection fails. If a connection is established successfully, but authentication fails, the remaining hosts in the list are not tried. If a password file is used, you can have different passwords for different hosts. All the other connection options are the same for every host in the list; it is not possible to e.g., specify different usernames for different hosts.

keyword

Pattern 3: Example:

host=localhost port=5432 dbname=mydb connect_timeout=10

Pattern 4: 32.1.1.2. Connection URIs # The general form for a connection URI is: postgresql://[userspec@][hostspec][/dbname][?paramspec] where userspec is: user[:password] and hostspec is: [host][:port][,...] and paramspec is: name=value[&...] The URI scheme designator can be either postgresql:// or postgres://. Each of the remaining URI parts is optional. The following examples illustrate valid URI syntax: postgresql:// postgresql://localhost postgresql://localhost:5433 postgresql://localhost/mydb postgresql://user@localhost postgresql://user:secret@localhost postgresql://other@localhost/otherdb?connect_timeout=10&application_name=myapp postgresql://host1:123,host2:456/somedb?target_session_attrs=any&application_name=myapp Values that would normally appear in the hierarchical part of the URI can alternatively be given as named parameters. For example: postgresql:///mydb?host=localhost&port=5433 All named parameters must match key words listed in Section 32.1.2, except that for compatibility with JDBC connection URIs, instances of ssl=true are translated into sslmode=require. The connection URI needs to be encoded with percent-encoding if it includes symbols with special meaning in any of its parts. Here is an example where the equal sign (=) is replaced with %3D and the space character with %20: postgresql://user@localhost:5433/mydb?options=-c%20synchronous_commit%3Doff The host part may be either a host name or an IP address. To specify an IPv6 address, enclose it in square brackets: postgresql://[2001:db8::1234]/database The host part is interpreted as described for the parameter host. In particular, a Unix-domain socket connection is chosen if the host part is either empty or looks like an absolute path name, otherwise a TCP/IP connection is initiated. Note, however, that the slash is a reserved character in the hierarchical part of the URI. So, to specify a non-standard Unix-domain socket directory, either omit the host part of the URI and specify the host as a named parameter, or percent-encode the path in the host part of the URI: postgresql:///dbname?host=/var/lib/postgresql postgresql://%2Fvar%2Flib%2Fpostgresql/dbname It is possible to specify multiple host components, each with an optional port component, in a single URI. A URI of the form postgresql://host1:port1,host2:port2,host3:port3/ is equivalent to a connection string of the form host=host1,host2,host3 port=port1,port2,port3. As further described below, each host will be tried in turn until a connection is successfully established.

postgresql://[userspec@][hostspec][/dbname][?paramspec]

where userspec is:

user[:password]

and hostspec is:

[host][:port][,...]

and paramspec is:

name=value[&...]

Pattern 5: 21.5. Predefined Roles # PostgreSQL provides a set of predefined roles that provide access to certain, commonly needed, privileged capabilities and information. Administrators (including roles that have the CREATEROLE privilege) can GRANT these roles to users and/or other roles in their environment, providing those users with access to the specified capabilities and information. For example: GRANT pg_signal_backend TO admin_user; Warning Care should be taken when granting these roles to ensure they are only used where needed and with the understanding that these roles grant access to privileged information. The predefined roles are described below. Note that the specific permissions for each of the roles may change in the future as additional capabilities are added. Administrators should monitor the release notes for changes. pg_checkpoint # pg_checkpoint allows executing the CHECKPOINT command. pg_create_subscription # pg_create_subscription allows users with CREATE permission on the database to issue CREATE SUBSCRIPTION. pg_database_owner # pg_database_owner always has exactly one implicit member: the current database owner. It cannot be granted membership in any role, and no role can be granted membership in pg_database_owner. However, like any other role, it can own objects and receive grants of access privileges. Consequently, once pg_database_owner has rights within a template database, each owner of a database instantiated from that template will possess those rights. Initially, this role owns the public schema, so each database owner governs local use of that schema. pg_maintain # pg_maintain allows executing VACUUM, ANALYZE, CLUSTER, REFRESH MATERIALIZED VIEW, REINDEX, and LOCK TABLE on all relations, as if having MAINTAIN rights on those objects. pg_monitorpg_read_all_settingspg_read_all_statspg_stat_scan_tables # These roles are intended to allow administrators to easily configure a role for the purpose of monitoring the database server. They grant a set of common privileges allowing the role to read various useful configuration settings, statistics, and other system information normally restricted to superusers. pg_monitor allows reading/executing various monitoring views and functions. This role is a member of pg_read_all_settings, pg_read_all_stats and pg_stat_scan_tables. pg_read_all_settings allows reading all configuration variables, even those normally visible only to superusers. pg_read_all_stats allows reading all pg_stat_* views and use various statistics related extensions, even those normally visible only to superusers. pg_stat_scan_tables allows executing monitoring functions that may take ACCESS SHARE locks on tables, potentially for a long time (e.g., pgrowlocks(text) in the pgrowlocks extension). pg_read_all_datapg_write_all_data # pg_read_all_data allows reading all data (tables, views, sequences), as if having SELECT rights on those objects and USAGE rights on all schemas. This role does not bypass row-level security (RLS) policies. If RLS is being used, an administrator may wish to set BYPASSRLS on roles which this role is granted to. pg_write_all_data allows writing all data (tables, views, sequences), as if having INSERT, UPDATE, and DELETE rights on those objects and USAGE rights on all schemas. This role does not bypass row-level security (RLS) policies. If RLS is being used, an administrator may wish to set BYPASSRLS on roles which this role is granted to. pg_read_server_filespg_write_server_filespg_execute_server_program # These roles are intended to allow administrators to have trusted, but non-superuser, roles which are able to access files and run programs on the database server as the user the database runs as. They bypass all database-level permission checks when accessing files directly and they could be used to gain superuser-level access. Therefore, great care should be taken when granting these roles to users. pg_read_server_files allows reading files from any location the database can access on the server using COPY and other file-access functions. pg_write_server_files allows writing to files in any location the database can access on the server using COPY and other file-access functions. pg_execute_server_program allows executing programs on the database server as the user the database runs as using COPY and other functions which allow executing a server-side program. pg_signal_autovacuum_worker # pg_signal_autovacuum_worker allows signaling autovacuum workers to cancel the current table's vacuum or terminate its session. See Section 9.28.2. pg_signal_backend # pg_signal_backend allows signaling another backend to cancel a query or terminate its session. Note that this role does not permit signaling backends owned by a superuser. See Section 9.28.2. pg_use_reserved_connections # pg_use_reserved_connections allows use of connection slots reserved via reserved_connections.

CREATEROLE

Pattern 6: 6.4. Returning Data from Modified Rows # Sometimes it is useful to obtain data from modified rows while they are being manipulated. The INSERT, UPDATE, DELETE, and MERGE commands all have an optional RETURNING clause that supports this. Use of RETURNING avoids performing an extra database query to collect the data, and is especially valuable when it would otherwise be difficult to identify the modified rows reliably. The allowed contents of a RETURNING clause are the same as a SELECT command's output list (see Section 7.3). It can contain column names of the command's target table, or value expressions using those columns. A common shorthand is RETURNING *, which selects all columns of the target table in order. In an INSERT, the default data available to RETURNING is the row as it was inserted. This is not so useful in trivial inserts, since it would just repeat the data provided by the client. But it can be very handy when relying on computed default values. For example, when using a serial column to provide unique identifiers, RETURNING can return the ID assigned to a new row: CREATE TABLE users (firstname text, lastname text, id serial primary key); INSERT INTO users (firstname, lastname) VALUES ('Joe', 'Cool') RETURNING id; The RETURNING clause is also very useful with INSERT ... SELECT. In an UPDATE, the default data available to RETURNING is the new content of the modified row. For example: UPDATE products SET price = price * 1.10 WHERE price <= 99.99 RETURNING name, price AS new_price; In a DELETE, the default data available to RETURNING is the content of the deleted row. For example: DELETE FROM products WHERE obsoletion_date = 'today' RETURNING ; In a MERGE, the default data available to RETURNING is the content of the source row plus the content of the inserted, updated, or deleted target row. Since it is quite common for the source and target to have many of the same columns, specifying RETURNING * can lead to a lot of duplicated columns, so it is often more useful to qualify it so as to return just the source or target row. For example: MERGE INTO products p USING new_products n ON p.product_no = n.product_no WHEN NOT MATCHED THEN INSERT VALUES (n.product_no, n.name, n.price) WHEN MATCHED THEN UPDATE SET name = n.name, price = n.price RETURNING p.; In each of these commands, it is also possible to explicitly return the old and new content of the modified row. For example: UPDATE products SET price = price * 1.10 WHERE price <= 99.99 RETURNING name, old.price AS old_price, new.price AS new_price, new.price - old.price AS price_change; In this example, writing new.price is the same as just writing price, but it makes the meaning clearer. This syntax for returning old and new values is available in INSERT, UPDATE, DELETE, and MERGE commands, but typically old values will be NULL for an INSERT, and new values will be NULL for a DELETE. However, there are situations where it can still be useful for those commands. For example, in an INSERT with an ON CONFLICT DO UPDATE clause, the old values will be non-NULL for conflicting rows. Similarly, if a DELETE is turned into an UPDATE by a rewrite rule, the new values may be non-NULL. If there are triggers (Chapter 37) on the target table, the data available to RETURNING is the row as modified by the triggers. Thus, inspecting columns computed by triggers is another common use-case for RETURNING.

INSERT

Pattern 7: In an UPDATE, the default data available to RETURNING is the new content of the modified row. For example:

UPDATE

Pattern 8: In a DELETE, the default data available to RETURNING is the content of the deleted row. For example:

DELETE

Example Code Patterns

Example 1 (javascript):

PGconn *PQconnectdbParams(const char * const *keywords,
                          const char * const *values,
                          int expand_dbname);

Example 2 (javascript):

PGconn *PQconnectdb(const char *conninfo);

Reference Files

This skill includes comprehensive documentation in references/:

• getting_started.md - Getting Started documentation
• sql.md - Sql documentation

Use view to read specific reference files when detailed information is needed.

Working with This Skill

For Beginners

Start with the getting_started or tutorials reference files for foundational concepts.

For Specific Features

Use the appropriate category reference file (api, guides, etc.) for detailed information.

For Code Examples

The quick reference section above contains common patterns extracted from the official docs.

Resources

references/

Organized documentation extracted from official sources. These files contain:

• Detailed explanations
• Code examples with language annotations
• Links to original documentation
• Table of contents for quick navigation

scripts/

Add helper scripts here for common automation tasks.

assets/

Add templates, boilerplate, or example projects here.

Notes

• This skill was automatically generated from official documentation
• Reference files preserve the structure and examples from source docs
• Code examples include language detection for better syntax highlighting
• Quick reference patterns are extracted from common usage examples in the docs

Updating

To refresh this skill with updated documentation:

1. Re-run the scraper with the same configuration
2. The skill will be rebuilt with the latest information

---

Source: ComeOnOliver/skillshub — distributed by TomeVault.