adafruit

The Adafruit TinyUSB Arduino build contract. Use when a change must be verified by building, when an agent needs the boards and example sketches a diff affects, when a HIL run or debug session needs firmware and its build record, or when a workflow asks for…

The Adafruit TinyUSB Arduino HIL contract, under agentrc's `hil` rules. Use when running the Arduino HIL battery on rig boards (Raspberry Pi Pico, Pico W, Pico 2, Adafruit Fruit Jam, Metro M4, ESP32-S3 DevKitM, ESP32-P4 Function EV), when a HIL run fails,…

The TinyUF2 build contract. Use when a change must be verified by building, when an agent needs the boards a diff affects, or when a workflow asks for "the project's build". Resolves scope to boards, builds each the way CI does in a private dir, runs the…

The TinyUF2 HIL contract: its roster, selection, build record, battery, locks, report and recovery under agentrc's `hil` rules. Use when a change needs hardware evidence on a rig board, when a debug or validation session must take, flash, clean up or release…

The Adafruit SPIFlash HIL contract, under agentrc's `hil` rules. Use when running the SPIFlash HIL test on rig boards (Metro M4 Express QSPI flash, Raspberry Pi Pico internal flash), when a HIL run fails, hangs or reports a board locked, when reading its…

The Adafruit SPIFlash build contract. Use when a change must be verified by building, when an agent needs the boards and sketches a diff affects, when a HIL run or debug session needs firmware and its build record, or when a workflow asks for "the project's…

Guides adding a new I2C sensor component to Adafruit IO WipperSnapper v1 firmware and the Wippersnapper_Components definition repo. Use this skill whenever the user wants to add a new sensor, create a WipperSnapper driver, register an I2C device, or…

Guides adding a new board (microcontroller / development board) to Adafruit IO WipperSnapper v1 firmware and the Wippersnapper_Boards companion definition repo, including adding support for new WiFi coprocessors (with an existing main MCU or a new board). Use…

Use this skill to add a new board to the WipperSnapper repository. This involves researching the board's specifications, creating a hardware description model in JSON format, and ensuring it adheres to the required structure outlined in the README.md file.…

Use this skill to add a new board to the WipperSnapper repository. This involves researching the board's specifications, creating a hardware description model in JSON format, and ensuring it adheres to the required structure outlined in the README.md file.…

Run CircuitPython code on a connected CircuitPython device and read the output. Use when testing CircuitPython code, debugging hardware interactions, or working with microcontrollers.

Write and run I2C driver validation tests that compare Arduino and CircuitPython I2C transactions for a given sensor/breakout. Use when validating that an Arduino driver and a CircuitPython driver produce equivalent I2C bus traffic for chip ID reads and all…

Interact with a physical embodiment kit microcontroller located in the user's room. Send commands to control a display (faces, messages, prompts), NeoPixel lights, a piezo buzzer, and a vibration motor — and to read sensors (temperature, humidity, pressure,…

Adds a new I2C sensor component definition to the Wippersnapper_Components repository. Use this skill whenever the user wants to create a matching PR from the firmware repo, add a new sensor component, create a definition.json, add an image for a…