run-llms

name

run-llms

description

Comprehensive guide for setting up and running local LLMs using Harbor. Use when user wants to run LLMs locally, set up or troubleshoot Ollama, Open WebUI, llama.cpp, vLLM, SearXNG, Open Terminal, or similar local AI services. Covers full setup from Docker prerequisites through running models, per-service configuration, VRAM optimization, GPU troubleshooting, web search integration, code execution, profiles, tunnels, and advanced features. Includes decision trees for autonomous agent workflows and step-by-step troubleshooting playbooks.

Run LLMs Locally with Harbor

Harbor is a containerized LLM toolkit. This skill enables autonomous setup, configuration, troubleshooting, and operation of local LLM infrastructure.

Agent Decision Trees

Use these decision trees to determine what action to take for common user requests.

User wants to run an LLM

1. Is Harbor installed?
   → NO: Install Harbor (see Initial Setup)
   → YES: Continue
2. Is Docker running?
   → Run: docker info
   → FAIL: Start Docker daemon, check installation
   → OK: Continue
3. Does the user have a specific model in mind?
   → YES: Determine format (Ollama tag, GGUF, HF safetensors)
     → Ollama tag (e.g. qwen3:4b): harbor pull <model> && harbor up
     → GGUF from HuggingFace: harbor pull <org/repo> && harbor up llamacpp
     → Safetensors/HF model: harbor vllm model <user/repo> && harbor up vllm
   → NO: Recommend a small default: harbor pull qwen3:4b && harbor up
4. Verify: harbor ps → confirm services healthy
5. Open UI: harbor open

User has GPU issues

1. Check NVIDIA drivers: nvidia-smi
   → FAIL: User needs to install NVIDIA drivers
   → OK: Continue
2. Check Container Toolkit: docker run --rm --gpus all nvidia/cuda:12.0-base nvidia-smi
   → FAIL: Install NVIDIA Container Toolkit, restart Docker
   → OK: Continue
3. Check service logs: harbor logs <service>
   → Look for: "CUDA error", "out of memory", "no GPU"
   → OOM: See "Model won't load / OOM" troubleshooting
   → No GPU detected: Check /etc/docker/daemon.json for nvidia runtime
4. Restart: sudo systemctl restart docker && harbor down && harbor up

User wants web search in chat

1. Start SearXNG: harbor up searxng
   → SearXNG auto-wires to Open WebUI when both run together
2. If WebUI was already running: harbor restart webui
3. Verify: harbor ps | grep searxng
4. Open UI: harbor open → Web search is now available in chat

User wants to change the model

1. Which backend is running?
   → harbor ps → identify running backend
2. Apply correct command:
   → Ollama: harbor pull <model> → select in UI dropdown
   → llama.cpp (single model): harbor llamacpp model <url> → harbor restart llamacpp
   → llama.cpp (router mode): harbor pull <org/repo> → model auto-discovered
   → vLLM: harbor vllm model <user/repo> → harbor restart vllm
3. Verify: harbor logs <backend> → wait for ready message

User wants code execution in chat

1. Start Open Terminal: harbor up openterminal
   → Auto-wires to Open WebUI with shared bearer token
2. Verify: harbor ps | grep openterminal
3. Open UI: harbor open → Code blocks now have "Run" button

User wants to expose Harbor to network/internet

1. LAN access:
   → harbor url --lan webui → get LAN URL
   → harbor qr webui → QR code for mobile
2. Internet tunnel:
   → harbor tunnel webui → creates cloudflared tunnel
   → Share the generated URL
   → harbor tunnel down → when done

Initial Setup Workflow

1. Check prerequisites
2. Install Harbor CLI
3. Start default services (Ollama + Open WebUI)
4. Pull a model
5. Verify the setup

Step 1: Check Prerequisites

docker --version        # Need Docker 20.10+
docker compose version  # Need Docker Compose 2.23.1+
git --version

If Docker missing:

• Linux: Install via official Docker repo
• macOS: Install Docker Desktop
• Windows: Install Docker Desktop + WSL2 (run all commands in WSL2)

If Docker Compose too old:

# Ubuntu/Debian
sudo apt-get update && sudo apt-get install docker-compose-plugin

Linux permission fix (if docker commands fail):

sudo usermod -aG docker $USER
# Log out and back in

Step 2: Install Harbor

# Check if installed
harbor --version

# Install if missing
curl https://av.codes/get-harbor.sh | bash
source ~/.bashrc  # or ~/.zshrc

Verify:

harbor doctor  # All checks should pass

Step 3: Start Harbor

harbor up

First run downloads images (may take several minutes). Wait for healthy output:

✔ Container harbor.ollama  Healthy
✔ Container harbor.webui   Healthy

Open UI: harbor open

First launch requires creating a local admin account in the browser.

Step 4: Pull a Model

# Recommended small model
harbor pull qwen3:4b

# Verify
harbor ollama list

Step 5: Verify

1. harbor open — opens UI in browser
2. Select the pulled model from dropdown
3. Send a test message

Core Commands

Command	Purpose
harbor up [services...]	Start services (defaults + specified)
harbor up --no-defaults <svc>	Start only specified services
harbor down	Stop all services
harbor ps	Show running services
harbor logs [service]	Tail logs
harbor logs -n 1000 <service>	Extended logs
harbor open [service]	Open in browser
harbor url [service]	Print service URL
harbor url --lan <service>	Print LAN URL
harbor url -i <service>	Print Docker-internal URL
harbor pull <model|service>	Download model or pull Docker image
harbor restart [service]	Restart service(s)
harbor build <service>	Build service image
harbor shell <service>	Interactive shell in container
harbor exec <service> <cmd>	Run command in container
harbor run <service> <cmd>	One-off command in fresh container
harbor doctor	System diagnostics
harbor fixfs	Fix file system ACLs for service volumes
harbor top	GPU monitoring via nvtop
harbor size	Show disk usage
harbor find <pattern>	Find files in caches
harbor eject	Export standalone docker-compose config
harbor qr <service>	Generate QR code for service URL

Model Management

Pull Sources

# Ollama registry
harbor pull qwen3:4b
harbor pull llama3.2:3b
harbor pull gemma3:4b

# HuggingFace via Ollama (hf.co prefix)
harbor pull hf.co/bartowski/gemma-2-2b-it-GGUF:Q4_K_M

# HuggingFace for llama.cpp / vLLM (org/repo format)
harbor pull microsoft/Phi-3.5-mini-instruct-gguf
harbor pull microsoft/Phi-3.5-mini-instruct-gguf:Q4_K_M

Pull routing logic: specs with / are tried against HuggingFace first (HEAD request, 5s timeout), then fall through to Ollama if unreachable.

Cross-Source Model Management

# List all models across Ollama, HuggingFace, and llama.cpp caches
harbor models ls

# List as JSON for scripting
harbor models ls --json

# Pull (auto-routes to HF or Ollama)
harbor models pull unsloth/Qwen3-4B-Instruct-GGUF

# Remove from all sources
harbor models rm qwen3.5:9b
harbor models rm unsloth/Qwen3-4B-Instruct-GGUF

HuggingFace Tools

harbor hf scan-cache           # Show cache status
harbor hf token <token>        # Set token for gated models
harbor hf download user/repo   # Download model
harbor hf find gguf gemma      # Search HF in browser
harbor hf path user/repo       # Find local cache path
harbor hf cache                # Show cache location
harbor hf cache /path/to/cache # Change cache location

Service: Ollama

Handle: ollama | Port: 33821 | Default service (starts with harbor up)

Ergonomic wrapper around llama.cpp with model management, auto-pull, and OpenAI-compatible API.

Ollama CLI

harbor ollama list              # List cached models
harbor ollama ls                # Alias for list
harbor ollama pull <model>      # Pull model from registry
harbor ollama rm <model>        # Remove model
harbor ollama run <model>       # Interactive chat in terminal
harbor ollama cp <src> <dst>    # Copy/alias a model
harbor ollama create -f <file> <name>  # Create from Modelfile
harbor ollama show <model> --modelfile # Show model's Modelfile
harbor ollama ps                # Show currently loaded models
harbor ollama ctx               # Get current context length
harbor ollama ctx <n>           # Set global context length
harbor ollama --help            # Full CLI help
harbor ollama version           # Show Ollama version
harbor ollama serve --help      # Show supported env vars

Ollama Model Sources

From Ollama registry:

harbor pull phi4
harbor pull qwen3:4b
harbor pull llama3.2:3b

From HuggingFace (hf.co prefix):

harbor ollama pull hf.co/unsloth/DeepSeek-R1-Distill-Llama-8B-GGUF:Q8_0

# Copy to a shorter alias
harbor ollama cp hf.co/unsloth/DeepSeek-R1-Distill-Llama-8B-GGUF:Q8_0 r1-8b

Ollama Custom Modelfiles

# Create a Modelfile
touch mymodel.Modelfile

# Edit with your settings (FROM, PARAMETER, SYSTEM, etc.)
# Import into Ollama (run from the directory containing the Modelfile)
harbor ollama create -f mymodel.Modelfile mymodel

# Source from existing model as template
harbor ollama show modelname:latest --modelfile > mymodel.Modelfile

# Test
harbor ollama run mymodel

Modelfiles in $(harbor home)/services/ollama/modelfiles/ can be referenced as:

harbor ollama create -f /modelfiles/mymodel.Modelfile mymodel

Ollama Context Length

# Get current global default
harbor ollama ctx

# Set global default (applies to all models)
harbor ollama ctx 8192

# Alternative via env
harbor env ollama OLLAMA_CONTEXT_LENGTH 8192

Note: harbor ollama ctx syncs to env, but not vice versa.

Ollama Configuration

# See all config keys
harbor config ls | grep OLLAMA

# Set version (docker tag)
harbor config set ollama.version 0.3.7-rc5-rocm

# Set env overrides
harbor env ollama OLLAMA_DEBUG 1
harbor env ollama OLLAMA_NUM_PARALLEL 4

Config Key	Default	Purpose
OLLAMA_CACHE	~/.ollama	Cache location (absolute or relative to harbor home)
OLLAMA_HOST_PORT	33821	Host port
OLLAMA_VERSION	latest	Docker image tag
OLLAMA_INTERNAL_URL	http://ollama:11434	URL given to connected services (change to use external Ollama)
OLLAMA_DEFAULT_MODELS	mxbai-embed-large:latest	Comma-separated models to pull on startup
OLLAMA_CONTEXT_LENGTH	4096	Global default context length

Switching to External Ollama

# Point all Harbor services to an external Ollama instance
# Use host.docker.internal or 172.17.0.1 instead of localhost
harbor config set ollama.internal_url http://172.17.0.1:11434

Ollama Troubleshooting

Model loading failures:

harbor logs ollama          # Check for errors
# Common: insufficient VRAM → try smaller quant
harbor pull model:q4_k_m    # Instead of larger quant

Slow first inference: Expected — model is loading into memory. Subsequent requests are fast.

Context length issues:

harbor ollama ctx 4096      # Reduce if OOM
harbor ollama ctx 131072    # Increase for large-context models

Model not found after pull:

harbor ollama list           # Verify model exists
harbor restart ollama        # Restart if needed

Service: llama.cpp

Handle: llamacpp | Port: 33831

LLM inference in C/C++. Bypasses Ollama's release cycle for access to latest models and features.

llama.cpp Modes

Single-model mode — set a specific model, server loads it on start:

harbor llamacpp model https://huggingface.co/user/repo/blob/main/file.gguf
harbor up llamacpp

Router mode (default when no model specifier set) — auto-discovers all cached GGUF models, loads on demand:

# Clear model specifier to use router mode
harbor config set llamacpp.model.specifier ""
harbor up llamacpp
# All downloaded GGUFs are available

Router mode discovers models from:

• HuggingFace cache (mounted at /root/.cache/huggingface)
• Models directory: place GGUFs in ./llamacpp/data/models
• Preset file: INI at ./llamacpp/data/models.ini

llama.cpp Pull Workflow

# Pull a GGUF model from HuggingFace
harbor pull bartowski/Qwen2.5-Coder-7B-Instruct-GGUF

# Pull with specific quantization
harbor pull unsloth/gemma-4-31B-it-GGUF:Q4_K_M

# Start llama.cpp (router mode auto-discovers the model)
harbor up llamacpp

llama.cpp CLI

harbor llamacpp model              # Get current model
harbor llamacpp model <hf_url>     # Set model (HuggingFace URL)
harbor llamacpp gguf               # Get current GGUF path
harbor llamacpp gguf /path/to.gguf # Set local GGUF path
harbor llamacpp args               # Get current extra args
harbor llamacpp args '<args>'      # Set extra args
harbor llamacpp models             # List loaded models (when running)
harbor llamacpp build on           # Enable build from source
harbor llamacpp build off          # Disable build from source
harbor llamacpp build ref          # Get current build ref
harbor llamacpp build ref <ref>    # Set build ref (branch/tag/commit)

llama.cpp Configuration

# Set extra CLI arguments
harbor llamacpp args '-c 4096 -n 512'

# See llama.cpp server help
harbor run llamacpp --server --help

# Access llama.cpp helper tools
harbor exec llamacpp ls

Config Key	Default	Purpose
LLAMACPP_CACHE	~/.cache/llama.cpp	Legacy cache path (models now stored in HF cache)
LLAMACPP_HOST_PORT	33831	Host port
LLAMACPP_IMAGE_CPU	ghcr.io/ggml-org/llama.cpp:server	CPU image
LLAMACPP_IMAGE_NVIDIA	ghcr.io/ggml-org/llama.cpp:server-cuda	NVIDIA GPU image
LLAMACPP_IMAGE_ROCM	ghcr.io/ggml-org/llama.cpp:server-rocm	AMD ROCm image

To override a specific capability image:

harbor config set llamacpp.image.nvidia ghcr.io/your-org/llama.cpp:server-cuda

llama.cpp Router Mode Details

# Configure model sources
harbor llamacpp args "--models-dir /app/data/models"
# Or use preset file
harbor llamacpp args "--models-preset /app/data/models.ini"
# Optional limits
harbor llamacpp args "--models-dir /app/data/models --models-max 4 --no-models-autoload"

Router API:

# List known models
curl http://localhost:33831/models

# Load a model
curl -X POST http://localhost:33831/models/load \
  -H "Content-Type: application/json" \
  -d '{"model":"ggml-org/gemma-3-4b-it-GGUF:Q4_K_M"}'

llama.cpp Build from Source

When pre-built images lag behind releases:

# Enable build from source
harbor llamacpp build on

# Optionally pin to a specific ref
harbor llamacpp build ref b5678

# Build (auto-detects GPU, picks correct Dockerfile)
harbor build llamacpp

# Start as usual
harbor up llamacpp

# Switch back to pre-built
harbor llamacpp build off
harbor pull llamacpp
harbor up llamacpp

llama.cpp with AMD Strix Halo (gfx1151)

AMD Strix Halo is a unified-memory APU requiring special images.

Image selection:

harbor config set llamacpp.image.rocm kyuz0/amd-strix-halo-toolboxes:rocm-7.2

Available tags: rocm-7.2, rocm-6.4.4, vulkan-radv (most stable for large models), vulkan-amdvlk.

Mandatory extra args:

harbor llamacpp args "llama-server -fa 1 --no-mmap"

Recommended full configuration:

harbor llamacpp args "llama-server -fa 1 --no-mmap -ngl 999 -c 65536 --cache-type-k q8_0 --cache-type-v q8_0 --batch-size 4096 --ubatch-size 512"

For MoE models, use --cache-type-k q4_0 --cache-type-v q4_0 --ubatch-size 256.

llama.cpp Troubleshooting

Router mode shows no models:

# Need to pull a GGUF model first
harbor pull bartowski/Qwen2.5-Coder-7B-Instruct-GGUF
harbor restart llamacpp

Model fails to load:

harbor logs llamacpp            # Check for errors
# Reduce GPU layers or context to fit VRAM
harbor llamacpp args '-c 2048 --n-gpu-layers 20'
harbor restart llamacpp

Service: vLLM

Handle: vllm | Port: 33911

High-throughput, memory-efficient inference engine. Best for production workloads with safetensors/HF models.

vLLM CLI

harbor vllm model               # Get current model
harbor vllm model <user/repo>   # Set model
harbor vllm args                 # Get current extra args
harbor vllm args '<args>'        # Set extra args
harbor vllm attention            # Get attention backend
harbor vllm attention ROCM_FLASH # Set attention backend
harbor vllm version              # Get current version
harbor vllm version <tag>        # Set version (docker tag)
harbor run vllm --help           # Show engine CLI help

vLLM Setup

# Set model
harbor vllm model Qwen/Qwen3.5-4B

# For gated models, set HF token first
harbor hf token <your-token>
harbor vllm model meta-llama/Llama-3.2-8B-Instruct

# Start (Harbor builds custom image with bitsandbytes)
harbor up vllm

# Monitor startup (wait for "Application startup complete")
harbor logs vllm

vLLM VRAM Optimization

These strategies are critical when models don't fit in VRAM. Apply in order of preference:

1. Reduce context length (most effective):

harbor vllm args '--max-model-len 4096'

2. Quantize on load (significant VRAM savings):

harbor vllm args '--load-format bitsandbytes --quantization bitsandbytes'

3. Offload layers to CPU:

harbor vllm args '--cpu-offload-gb 4'

4. Disable CUDA graphs (saves VRAM spike at load, reduces speed):

harbor vllm args '--enforce-eager'

5. Tune GPU memory cap:

harbor vllm args '--gpu-memory-utilization 0.85'

6. CPU-only mode (very slow, last resort):

harbor vllm args '--device cpu'

Combined example for tight VRAM:

harbor vllm args '--max-model-len 4096 --load-format bitsandbytes --quantization bitsandbytes --enforce-eager'

vLLM Configuration

# Set version
harbor vllm version v0.9.1
harbor vllm version latest

# Set custom image
harbor config set vllm.image custom/vllm

# Force pull latest
docker pull $(harbor config get vllm.image):$(harbor config get vllm.version)

# Set host port
harbor config set vllm.host.port 4090

vLLM Troubleshooting

OOM on startup:

harbor logs vllm  # Look for "OutOfMemoryError"
# Apply VRAM optimization strategies above
harbor vllm args '--max-model-len 2048 --enforce-eager'
harbor restart vllm

Model not loading (gated):

harbor hf token <token>   # Set HF token
harbor restart vllm

Slow startup: Expected — vLLM compiles CUDA graphs on first run. Use --enforce-eager to skip (at inference speed cost).

Service: Open WebUI

Handle: webui | Port: 33801 | Default service (starts with harbor up)

Full-featured chat UI with model management, prompt library, persistent history, document RAG, web RAG, tools, and functions.

Open WebUI Starting

# Starts automatically with defaults
harbor up

# Or explicitly
harbor up webui

# Pre-pull image
harbor pull webui

First launch requires creating an admin account in the browser.

Open WebUI Auto-Wired Integrations

When started together, these services auto-connect to Open WebUI:

harbor up searxng          # Web search / Web RAG
harbor up comfyui          # Image generation
harbor up speaches         # TTS / STT
harbor up pipelines        # LLM orchestration pipelines
harbor up metamcp mcpo     # MCP tool servers
harbor up cognee           # Knowledge graph (MCP)
harbor up openterminal     # Terminal + notebook execution

Open WebUI CLI

harbor webui version              # Get current version
harbor webui version dev-cuda     # Set version (docker tag)
harbor webui version main         # Use main branch
harbor webui name                 # Get UI display name
harbor webui name "My AI"         # Set UI display name
harbor webui secret               # Get JWT secret
harbor webui secret sk-203948     # Set JWT secret
harbor webui log                  # Get log level
harbor webui log DEBUG            # Set log level (DEBUG, INFO, WARNING, ERROR)

Open WebUI Config Override

Harbor assembles config from integration pieces. To override without Harbor resetting:

# Edit the override file (applied last, always wins)
open $(harbor home)/services/webui/configs/config.override.json

Open WebUI Configuration

Config Key	Default	Purpose
WEBUI_HOST_PORT	33801	Host port
WEBUI_SECRET	h@rb0r	JWT token secret
WEBUI_NAME	Harbor	UI display name
WEBUI_LOG_LEVEL	INFO	Log level
WEBUI_VERSION	main	Docker image tag
HARBOR_WEBUI_IMAGE	ghcr.io/open-webui/open-webui:main	Docker image

# Set arbitrary env vars
harbor env webui ENABLE_REALTIME_CHAT_SAVE false

Open WebUI Troubleshooting

Can't create admin account: Clear browser cache, try incognito. Check harbor logs webui.

Backend models not showing: Check Settings → Connections in UI. Verify backend running with harbor ps.

Config changes lost on restart: Use config.override.json instead of the UI settings panel for persistent overrides.

Service: SearXNG

Handle: searxng | Port: 33811

Metasearch engine that aggregates results from multiple search services. Provides web search / Web RAG to Open WebUI and other frontends.

SearXNG Setup

# Start — auto-connects to Open WebUI
harbor up searxng

# If WebUI was already running, restart to pick up connection
harbor restart webui

# Verify
harbor ps | grep searxng
harbor url searxng

SearXNG Auto-Integrations

Auto-connects to: webui, ldr, chatui, chatnio, perplexica, anythingllm

SearXNG Configuration

# Point Harbor to an external SearXNG instance
harbor config set searxng.internal_url http://external:8080

Config files are in $(harbor home)/searxng/ (settings.yml, limiter.toml). See SearXNG configuration reference for engine customization.

Config Key	Default	Purpose
SEARXNG_HOST_PORT	33811	Host port
SEARXNG_IMAGE	searxng/searxng	Docker image
SEARXNG_VERSION	latest	Docker image tag
SEARXNG_INTERNAL_URL	http://searxng:8080	URL used by connected services
SEARXNG_WORKSPACE	./searxng	Config files location

SearXNG Troubleshooting

Web search not appearing in WebUI:

harbor ps | grep searxng       # Confirm running
harbor logs searxng            # Check for errors
harbor restart webui           # Restart WebUI to pick up connection

Service: Open Terminal

Handle: openterminal | Port: 34771

Remote shell and file-management API for AI agents. Provides terminal + notebook execution capability to Open WebUI.

Open Terminal Setup

# Start — auto-wires to Open WebUI
harbor up openterminal

# Start with WebUI explicitly
harbor up webui openterminal

# Check API key
harbor config get openterminal.api.key

When started with WebUI, Harbor auto-configures the bearer token and internal URL — no manual setup needed.

Open Terminal Filesystem

• /home/user — Harbor-managed sandbox (default workspace, persists across restarts)
• /workspace/host — optional mount of a real host folder (opt-in)
• Docker socket mount is opt-in

Open Terminal Package Installation

# Install system packages (space-separated)
harbor config set openterminal.packages "ripgrep fd-find jq"

# Install Python packages (space-separated)
harbor config set openterminal.pip_packages "httpx polars pandas numpy"

# Restart to apply
harbor restart openterminal

Open Terminal Host Workspace Mount

# Mount a real host folder at /workspace/host
harbor config set openterminal.host.workspace /absolute/path/to/project
harbor restart openterminal

Open Terminal Docker Access

# Enable Docker socket (trusted environments only)
harbor config set openterminal.docker.socket true
harbor restart openterminal

Open Terminal Configuration

Config Key	Default	Purpose
HARBOR_OPENTERMINAL_HOST_PORT	34771	Host port
HARBOR_OPENTERMINAL_IMAGE	ghcr.io/open-webui/open-terminal	Docker image
HARBOR_OPENTERMINAL_VERSION	v0.10.2	Image version
HARBOR_OPENTERMINAL_WORKSPACE	./services/openterminal/data	Persistent sandbox path
HARBOR_OPENTERMINAL_API_KEY	"" (auto-generated)	Bearer token
HARBOR_OPENTERMINAL_PACKAGES	""	System packages to install on start
HARBOR_OPENTERMINAL_PIP_PACKAGES	""	Python packages to install on start
HARBOR_OPENTERMINAL_EXECUTE_TIMEOUT	5	Default wait timeout (seconds)
HARBOR_OPENTERMINAL_ENABLE_TERMINAL	true	Enable interactive terminal sessions
HARBOR_OPENTERMINAL_ENABLE_NOTEBOOKS	true	Enable notebook execution
HARBOR_OPENTERMINAL_HOST_WORKSPACE	""	Host folder mount (opt-in)
HARBOR_OPENTERMINAL_DOCKER_SOCKET	false	Docker socket access (opt-in)

Open Terminal Troubleshooting

harbor logs openterminal                        # Check logs
curl http://localhost:34771/health              # Check health

# Reset sandbox
harbor down openterminal
rm -rf services/openterminal/data
harbor up openterminal

Configuration

Config Commands

harbor config ls                     # List all config
harbor config ls | grep OLLAMA       # Filter config
harbor config get webui.host.port    # Get value
harbor config set webui.name "My AI" # Set value

Service-Specific Environment

harbor env <service>                 # List override env vars
harbor env <service> KEY             # Get a specific var
harbor env <service> KEY value       # Set an env var

Defaults Management

harbor defaults                  # Show default services
harbor defaults ls               # Alias
harbor defaults add llamacpp     # Add to default services
harbor defaults rm webui         # Remove from defaults

Profiles (Save/Load Configurations)

harbor profile ls                    # List profiles
harbor profile save mysetup         # Save current config
harbor profile use mysetup           # Load profile
harbor profile use <url>             # Load from remote URL
harbor profile rm mysetup            # Delete profile

Profiles are partial — only specify options you want to change. Changes after loading are not auto-saved; use harbor profile save <name> to persist.

Cache Locations

harbor config ls | grep CACHE        # Show cache paths
harbor size                          # Show disk usage
harbor hf cache                      # Show HF cache location
harbor hf cache /path/to/cache       # Change HF cache location

Network & Access

URLs

harbor url webui            # Local URL
harbor url --lan webui      # LAN URL
harbor url -i webui         # Docker internal URL
harbor qr webui             # QR code for mobile

Tunnels (Internet Access)

harbor tunnel webui         # Create temporary cloudflared tunnel
harbor tunnel down          # Stop tunnels
harbor tunnels add webui    # Auto-tunnel on startup
harbor tunnels ls           # List auto-tunnels
harbor tunnels rm webui     # Remove auto-tunnel

Troubleshooting Playbooks

Services Won't Start

# 1. Check container status
harbor ps

# 2. Check for errors in logs
harbor logs <service>

# 3. Check for crash loops
docker ps -a | grep harbor

# 4. Full restart
harbor down && harbor up

# 5. Check Docker daemon health
docker info

# 6. Fix volume permissions (Linux)
harbor fixfs

No GPU Detected / CUDA Errors

# 1. Verify NVIDIA drivers installed and working
nvidia-smi

# 2. Verify NVIDIA Container Toolkit
docker run --rm --gpus all nvidia/cuda:12.0-base nvidia-smi
# If this fails: install nvidia-container-toolkit, then restart Docker

# 3. Check Docker daemon GPU config
cat /etc/docker/daemon.json
# Should contain "nvidia" runtime or default-runtime

# 4. Restart Docker daemon
sudo systemctl restart docker

# 5. Restart Harbor
harbor down && harbor up

Model Won't Load / OOM

# 1. Check available VRAM
nvidia-smi

# 2. Check model size vs available VRAM

# 3. For Ollama: try smaller quantization
harbor pull model:q4_k_m

# 4. For vLLM: reduce context, quantize, or offload
harbor vllm args '--max-model-len 4096'
harbor vllm args '--load-format bitsandbytes --quantization bitsandbytes'
harbor vllm args '--cpu-offload-gb 4'
harbor vllm args '--enforce-eager'

# 5. For llama.cpp: reduce context or GPU layers
harbor llamacpp args '-c 2048 --n-gpu-layers 20'

# 6. Restart the backend
harbor restart <backend>

Can't Access UI / Connection Refused

# 1. Confirm containers are running
harbor ps

# 2. Get correct URL
harbor url webui

# 3. Check port conflicts
ss -tlnp | grep 33801

# 4. Try direct access
harbor open
# Or navigate to http://localhost:33801

Model Not Showing in UI

# 1. Confirm model exists (for Ollama)
harbor ollama list

# 2. Refresh the Open WebUI page in browser

# 3. Check Open WebUI connections
# Settings → Connections in the UI

# 4. Check for connection errors
harbor logs webui

# 5. Restart WebUI if needed
harbor restart webui

Web Search Not Working

# 1. Confirm SearXNG is running
harbor ps | grep searxng

# 2. Check SearXNG logs
harbor logs searxng

# 3. If SearXNG started after WebUI, restart WebUI
harbor restart webui

# 4. Verify SearXNG is accessible
harbor url searxng

Slow or Hanging Inference

# 1. Check GPU utilization
harbor top

# 2. Check if model is loading (first inference is slow)
harbor logs <backend>

# 3. For Ollama: check if multiple models are loaded
harbor ollama ps

# 4. For vLLM: check if CUDA graphs are compiling
harbor logs vllm
# Wait for "Application startup complete"

# 5. Check for CPU fallback (no GPU detected)
harbor logs <backend> | grep -i "cpu\|gpu\|cuda"

Common Workflows

Run a Small Model Quickly

harbor up
harbor pull qwen3:4b
harbor open
# → Select model in UI dropdown, start chatting

Run a Large Model with Limited VRAM (vLLM + Quantization)

# Set HF token if model is gated
harbor hf token <token>

# Set model
harbor vllm model meta-llama/Llama-3.2-8B-Instruct

# Apply VRAM optimizations
harbor vllm args '--max-model-len 4096 --load-format bitsandbytes --quantization bitsandbytes'

# Start
harbor up vllm

# Monitor startup
harbor logs vllm  # Wait for "Application startup complete"

Set Up Web-Augmented Chat

# Start SearXNG (auto-connects to Open WebUI)
harbor up searxng

# Open UI
harbor open
# → Web search is now available in chat

Run llama.cpp with a Specific GGUF

# Pull the model
harbor pull bartowski/Qwen2.5-Coder-7B-Instruct-GGUF

# Start llama.cpp (router mode auto-discovers the model)
harbor up llamacpp

# Open UI
harbor open
# → Select the GGUF model from dropdown

Enable Code Execution in Chat

# Start Open Terminal (auto-wires to Open WebUI)
harbor up openterminal

# Open UI
harbor open
# → Code blocks now have "Run" button

Switch Between Backends

# Stop current backend
harbor down vllm

# Start different backend
harbor up llamacpp

# Open WebUI auto-discovers new backend
harbor open

Save and Restore Configuration

# Save current config as a profile
harbor profile save my-dev-setup

# Later, restore
harbor profile use my-dev-setup

# Import from URL
harbor profile use https://example.com/path/to/profile.env

Expose to Local Network

# Get LAN URL
harbor url --lan webui

# Generate QR code for mobile
harbor qr webui

Create a Temporary Internet Tunnel

# Create cloudflared tunnel
harbor tunnel webui
# Share the generated URL

# When done
harbor tunnel down

Full Setup with Web Search + Code Execution

harbor up searxng openterminal
harbor pull qwen3:4b
harbor open
# → Chat with web search and code execution enabled

Advanced Features

Aliases

harbor alias set myenv 'code $(harbor home)/.env'
harbor run myenv
harbor alias ls
harbor alias rm myenv

History

harbor history             # Interactive history browser
harbor history ls          # List history
harbor history clear       # Clear history

AI Help

harbor how to filter logs?   # AI-powered help (requires Ollama running)

File Search

harbor find .gguf            # Find GGUF files in caches
harbor find bartowski        # Find files by name

Eject Config

harbor eject > docker-compose.yml  # Export standalone compose config

GPU Monitoring

harbor top                   # nvtop for GPU usage

Available Backends Quick Reference

Backend	Handle	Set Model	Best For
Ollama	ollama	harbor pull <model>	Ease of use, Ollama registry
llama.cpp	llamacpp	harbor llamacpp model <url>	GGUF models, bleeding edge
vLLM	vllm	harbor vllm model <user/repo>	Production inference, HF models
TGI	tgi	harbor tgi model <user/repo>	HuggingFace ecosystem
SGLang	sglang	harbor sglang model <user/repo>	Fast inference

Service Handle Reference

Service	Handle	Port	CLI	Purpose
Open WebUI	webui	33801	harbor webui	Chat UI (default)
Ollama	ollama	33821	harbor ollama	LLM backend (default)
llama.cpp	llamacpp	33831	harbor llamacpp	GGUF backend
vLLM	vllm	33911	harbor vllm	Production backend
SearXNG	searxng	33811	—	Web search
Open Terminal	openterminal	34771	—	Terminal + notebooks
ComfyUI	comfyui	—	harbor comfyui	Image generation
LiteLLM	litellm	—	harbor litellm	API proxy
TGI	tgi	—	harbor tgi	HuggingFace backend
SGLang	sglang	—	harbor sglang	Fast inference backend
Aider	aider	—	harbor aider	AI coding
n8n	n8n	—	—	Workflow automation
Jupyter	jupyter	—	harbor jupyter	Notebooks
Speaches	speaches	—	—	TTS / STT

Environment Variable Quick Reference

All variables below can be queried/set with harbor config get/set <key> (using dot notation) or found in harbor config ls.

Variable	Default	Service	Purpose
OLLAMA_CACHE	~/.ollama	ollama	Model cache location
OLLAMA_HOST_PORT	33821	ollama	Host port
OLLAMA_VERSION	latest	ollama	Docker tag
OLLAMA_INTERNAL_URL	http://ollama:11434	ollama	URL for connected services
OLLAMA_DEFAULT_MODELS	mxbai-embed-large:latest	ollama	Models to pull on startup
OLLAMA_CONTEXT_LENGTH	4096	ollama	Global default context
LLAMACPP_CACHE	~/.cache/llama.cpp	llamacpp	Legacy cache path
LLAMACPP_HOST_PORT	33831	llamacpp	Host port
LLAMACPP_IMAGE_CPU	ghcr.io/ggml-org/llama.cpp:server	llamacpp	CPU image
LLAMACPP_IMAGE_NVIDIA	ghcr.io/ggml-org/llama.cpp:server-cuda	llamacpp	NVIDIA image
LLAMACPP_IMAGE_ROCM	ghcr.io/ggml-org/llama.cpp:server-rocm	llamacpp	ROCm image
WEBUI_HOST_PORT	33801	webui	Host port
WEBUI_SECRET	h@rb0r	webui	JWT secret
WEBUI_NAME	Harbor	webui	UI display name
WEBUI_LOG_LEVEL