メニュー
Define time-varying amplitudes. Use when user mentions ramp, time-varying, cyclic, pulse, or gradually increasing loads. Does NOT handle static constant loads.
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
SOC 職業分類に基づく
| name | abaqus-amplitude |
| description | Define time-varying amplitudes. Use when user mentions ramp, time-varying, cyclic, pulse, or gradually increasing loads. Does NOT handle static constant loads. |
| allowed-tools | ["Read","Write","Edit","Glob","Grep","Bash(abaqus:*)"] |
This skill defines time-varying load and boundary condition profiles in Abaqus. Amplitudes act as multipliers that scale loads/BCs over time.
Route here when user mentions:
Route elsewhere:
/abaqus-load/abaqus-field/abaqus-dynamic-analysisAsk if unclear:
| User Describes | Amplitude Type | Key Parameters |
|---|---|---|
| Linear increase/decrease | TabularAmplitude | Time-value pairs |
| Smooth transition (no shock) | SmoothStepAmplitude | Time-value pairs |
| Sinusoidal/harmonic | PeriodicAmplitude | Frequency, coefficients |
| Exponential decay | DecayAmplitude | Initial, decayTime |
| Custom time history | TabularAmplitude | User-provided data |
| Sudden on/off | TabularAmplitude | Step-like data points |
Most common: TabularAmplitude with linear ramp (0,0) to (1,1)
| Setting | When to Use |
|---|---|
timeSpan=STEP | Time relative to current step start (most common) |
timeSpan=TOTAL | Time from analysis beginning (multi-step analyses) |
For TabularAmplitude and SmoothStepAmplitude:
Amplitudes are referenced by name when creating:
| Profile | Data Pattern | Use Case |
|---|---|---|
| Linear ramp | (0,0), (1,1) | Quasi-static loading |
| Ramp up/down | (0,0), (0.5,1), (1,0) | Load cycle |
| Hold at peak | (0,0), (0.1,1), (1,1) | Ramp then sustain |
| Triangular pulse | (0,0), (0.001,1), (0.002,0) | Impact/impulse |
| Step function | (0,0), (0,1), (1,1) | Sudden application |
| Use SmoothStepAmplitude when | Use TabularAmplitude when |
|---|---|
| Dynamic analysis (avoid shocks) | Static analysis |
| Convergence issues from sudden loads | Exact load profile needed |
| Continuous derivatives required | Step functions needed |
| Input | Required | How to Get |
|---|---|---|
| Load profile shape | YES | Ask: "How should the load vary over time?" |
| Peak time | YES | Ask: "When should the load reach its maximum?" |
| Duration | YES | Typically matches step time |
| Frequency (if cyclic) | If periodic | Ask: "What frequency in Hz?" |
| Smooth or sudden | Recommended | Ask if dynamic analysis |
After defining amplitude:
| Problem | Likely Cause | Solution |
|---|---|---|
| "Amplitude not monotonic in time" | Time values not increasing | Fix time sequence |
| Convergence issues with sudden load | Discontinuity in profile | Use SmoothStepAmplitude |
| Load too high/low | Misunderstanding multiplier | Amplitude is factor; adjust load magnitude |
| Wrong timing in multi-step | STEP vs TOTAL confusion | Check timeSpan setting |
For API syntax and code examples, see:
Orchestrate evidence-backed ANSYS Workbench and Mechanical structural analyses through a configured MCP, including capability discovery, existing-project or CAD intake, materials, named selections, connections, loads, high-quality mesh planning and repair, solving, convergence diagnosis, deterministic validation, and report export. Use for linear static, nonlinear static, contact, modal, eigenvalue buckling, or related structural-analysis work when Codex must operate or inspect a live Workbench session instead of only explaining theory.
Use this skill when driving CST Studio Suite through the CST MCP for electromagnetic simulation workflows: creating or opening CST projects, resolving missing inputs, selecting templates, setting up geometry/materials/ports/boundaries/mesh/solvers/monitors, running or planning simulations, extracting S-parameters/far-field/near-field/eigenmode results, validating outputs, parameter sweeps, optimization handoff, and report generation.
CST Studio Suite 正式生产入口。覆盖 session 管理、几何建模、参数优化、仿真、S11/远场结果读取和审计落盘。当用户要求使用 CLI/runtime 执行 CST 操作时调用此 Skill。
当用户要求使用 CLI/runtime 执行 CST 参数优化循环、S11 指标迭代、多轮仿真对比时调用此 Skill。本 Skill 依赖 cst-runtime-cli 提供基础设施，不携带 runtime scripts，所有 CLI 调用走 base skill 的 uv run python -m cst_runtime 入口。
Analyze multi-body contact. Use when user mentions parts touching, friction between surfaces, bolt-plate contact, press fit, or assembly with contact.
Complete workflow for coupled thermomechanical analysis. Use when user mentions thermal stress, thermal expansion, or temperature causing deformation.