loop-cron

name	loop-cron
description	Use when scheduling cron-mode loops with Claude Code's /loop, when registering periodic background work, when the user says 'cron loop', 'periodic loop', 'register a cron', 'schedule recurring work', or when configuring a loop that needs to be visible in `empirica status`. This skill provides the prompt template that wires CC's /loop into Empirica's loop registry — register at start, check pause flag each fire, heartbeat at end. Without this wiring, a /loop cron is invisible to the cockpit and uncontrollable from any other terminal.
version	1.1.0

Loop-Cron Wiring

Claude Code's built-in /loop skill drives periodic work via CronCreate. On its own, those loops are invisible to other terminals — you can't see what's scheduled, can't tell when one last ran, and can't pause them without killing the process. Empirica's loop registry fixes that with three CLI calls layered into the cron prompt.

This skill is the prompt template for cron-mode loops that integrates with the registry.

---

When to Use

You're about to start a cron-mode loop with /loop (or already have one running) and:

• You want it visible in empirica status --all
• You want to pause/resume from any terminal without killing the process
• You want a heartbeat trail for "did it actually run, did it succeed"
• You want it to survive a Claude Code session restart cleanly

If your loop is one-shot or interactive ("dynamic mode"), skip this — it applies to scheduled (cron/interval) loops only.

---

Cron Prompt Template (self-scheduling)

Per PROPOSAL_LOOP_SELF_SCHEDULING.md: the body owns the schedule. Each fire installs the next fire as a one-shot at the timestamp the backoff math returns. There is no recurring cron — pause means the scheduler is silent (no token bleed).

When invoking /loop in cron mode, prepend these CLI lines to your task prompt. Variables: {NAME} (loop identifier, no spaces), {INTERVAL} (base cadence, e.g. 15m), {DESC} (one-line description).

At start (idempotent — safe to call every fire):
  empirica loop register --name {NAME} --kind cron --interval "{INTERVAL}" \
    --description "{DESC}" \
    --backoff exponential --base-interval {INTERVAL} --max-interval 4h

Check pause — exit silently AND don't schedule next fire if paused:
  PAUSED=$(empirica loop status {NAME} --output json | jq -r .paused)
  if [ "$PAUSED" = "true" ]; then
    empirica loop heartbeat {NAME} --status ok --result paused \
      --message "skipped, paused"
    exit 0   # CRITICAL: exit without scheduling next; loop is genuinely off
  fi

[... your actual work here, capturing $RESULT as found|empty|fail ...]

At end — heartbeat with result, then schedule + install the next fire:
  empirica loop heartbeat {NAME} --status ok --result $RESULT \
    --message "$SUMMARY"

  NEXT_CRON=$(empirica loop schedule-next {NAME} --output json | jq -r .cron_one_shot)

  # Install the next one-shot using your scheduler:
  # Claude Code:    CronCreate(cron=$NEXT_CRON, recurring=false,
  #                            prompt='<this whole template again>')
  # systemd-user:   systemd-run --user --on-active=$INTERVAL ...
  # at-queue:       echo '<command>' | at -t $(date -u -d "$NEXT_FIRE" +%Y%m%d%H%M)

  # Then heartbeat back the scheduler-returned job_id so pause can cancel:
  empirica loop heartbeat {NAME} --status ok --result $RESULT \
    --next-scheduled-job-id "$JOB_ID" --scheduler-kind cron-create

On failure:
  empirica loop heartbeat {NAME} --status fail --result fail \
    --message "{error}"
  # Failure retries at base — schedule-next still returns base interval.

The register call is idempotent — it preserves runtime state (last_run, last_status, last_message, last_result, empty_streak, next_scheduled_job_id) while updating declarative fields. Safe to re-issue on every fire without losing history.

Backoff stretches the actual schedule (not just a body-internal threshold like the previous spec). schedule-next returns:

• streak 0 → base interval (e.g. 15m)
• streak 1 → base × 2 = 30m
• streak 2 → base × 4 = 1h
• ... capped at --max-interval (default 4h)

--result is the schedule signal:

• found → new work happened — reset streak, next fire at base
• empty → fire ran cleanly, nothing to do — advance streak
• fail → errored — reset streak, retry at base (no compound delay)
• paused → body short-circuited on pause check — freezes streak

The body is its own next-fire scheduler — every fire installs the next one. empirica loop pause clears the recorded next_scheduled_job_id; the body's pause check at the start of the next fire is the final backstop (it sees the pause flag and exits without scheduling).

Manual escape hatches:

empirica loop poke {NAME}

Resets the streak to 0 and clears the threshold. The next fire (when it arrives) runs at base.

empirica loop fire {NAME}

Computes the next-fire schedule and emits the cron expression + a hint to install it. Bootstraps after empirica loop resume on Claude Code (the empirica CLI can't call CronCreate directly — re-issue via /loop or run the printed CronCreate(...) invocation).

---

Concrete Example

A 15-minute inbox poll with backoff:

/loop --cron "*/15 * * * *" --prompt "
At start:
  empirica loop register --name inbox-poll --kind cron \
    --cron '*/15 * * * *' --description 'ECO inbox digest' \
    --backoff exponential --base-interval 15m --max-interval 4h

Check pause + backoff:
  if [ \"\$(empirica loop status inbox-poll --output json | jq -r .paused)\" = \"true\" ]; then
    exit 0
  fi
  if ! empirica loop should-fire inbox-poll; then
    exit 0
  fi

Then: read each connected inbox, summarize unread mail, capture findings.

At end:
  if [ \"\$NEW_COUNT\" -gt 0 ]; then
    empirica loop heartbeat inbox-poll --status ok --result found \
      --message \"\$INBOXES_CHECKED inboxes, \$NEW_COUNT new\"
  else
    empirica loop heartbeat inbox-poll --status ok --result empty \
      --message \"\$INBOXES_CHECKED inboxes, none new\"
  fi

On failure:
  empirica loop heartbeat inbox-poll --status fail --result fail \
    --message \"\$ERROR_MESSAGE\"
"

---

Pausing and Resuming

From any terminal, on any machine that shares ~/.empirica/:

empirica loop pause inbox-poll      # cancels next fire (no token bleed)
empirica loop resume inbox-poll     # clears flag; bootstrap with `loop fire`
empirica loop status inbox-poll     # show last run + paused state
empirica loop list                  # all loops on this instance
empirica loop unregister inbox-poll # remove from registry entirely

pause clears the recorded next_scheduled_job_id and — for CronCreate-mode loops — writes a pending uninstall request file at ~/.empirica/loop_uninstall_pending_{instance}_{name}.json containing the job_id. The owning Claude instance's UserPromptSubmit hook (loop-uninstall-pickup.py) surfaces this on the next prompt as a system-reminder asking Claude to run CronDelete(job_id) from inside that CC session. The cron is then genuinely off — no more fires.

If the owning Claude doesn't run CronDelete in time, the body's pause check at the next fire is the backstop: it sees the pause flag and exits without scheduling the next fire, so the loop dies cleanly after at most one more silent fire. CronDelete makes that one extra fire go away too.

resume clears the pause flag. The next prompt in the target instance will pick up any pending install request and the body will re-arm itself. To reissue the install (bootstrap the cron) from any other terminal:

empirica loop install-request --instance {INSTANCE_ID} \
  --name {NAME} --interval {INTERVAL}

That registers in the target's registry and queues a pending request that the target instance's UserPromptSubmit hook surfaces as a system-reminder on the next prompt — Claude in that instance runs /loop and CronCreate fires. Use empirica loop fire {NAME} for single manual fires (testing, ad-hoc poke).

State	Cron firing	Body running	Tokens
Active, no backoff	every base	every fire	every base
Active, in backoff	every backoff_interval	every fire	every backoff_interval
Paused	never	never	none

---

Visibility

Once registered, the loop appears in:

empirica status              # current instance
empirica status --all        # every Claude across every terminal
watch -n 2 empirica status --all --pretty   # live cockpit

…showing kind, schedule, last fire, last status, and pause state in one table. This is the comprehension principle: you shouldn't run loops you can't read.

---

Migration from Bespoke Pause Files

Old patterns like touch /tmp/inbox-poll.disabled should migrate to empirica loop pause inbox-poll. The standard pattern wins because:

• Visible to other instances (any tmux pane can pause/resume)
• Surfaces in the cockpit (empirica status shows pause state)
• Survives reboots (~/.empirica/ persists)
• Scoped per-instance (no cross-talk between Claudes)

Once an old /tmp/*.disabled loop is re-issued through this template, the bespoke flag file becomes dead code and can be deleted.

---

Related

• empirica status --all --pretty — cockpit overview
• empirica sentinel pause/resume — per-instance noetic firewall control
• docs/architecture/COCKPIT.md — full state-file layout and discovery rules