dokploy-traefik-traffic-split

name	dokploy-traefik-traffic-split
description	Use when you need to canary-deploy two HTTP backends on the same Dokploy-managed domain with a percentage split (e.g. migrating an SPA from one framework to another). Covers the critical SPA-asset trap that breaks naive sticky-cookie splits, a path-aware Traefik config that solves it, and a four-phase workflow (backup → dry-run on a canary host → roll to prod → quick rollback).

Dokploy Traefik Traffic Split for SPA Migrations

Canary two HTTP backends (e.g. an old Next.js app and a new Remix app) under one domain with a weighted split that survives SPAs with different build-output paths.

When to use

• Migrating a frontend between frameworks where build outputs live on different URL prefixes (/_next/* vs /assets/*, /build/*, etc.)
• Running A/B between two long-running services already deployed in Dokploy
• Any percentage-based traffic split on Dokploy's bundled Traefik where you also need session stickiness

If both backends are byte-identical builds behind the same image, a plain Dokploy "Replicas" bump is enough — this skill is overkill.

Core insight: the SPA asset trap

A naive sticky-cookie weighted split breaks SPAs with divergent asset paths.

1. Browser hits /, no cookie, Traefik weighted picks lane A → returns HTML referencing /assets/<hash>.js plus a Set-Cookie.
2. Browser's preload scanner fires 30+ asset requests in parallel. Some land at Traefik before the cookie is reliably attached (HTTP/2 stream ordering, request coalescing, or the browser hasn't committed the cookie yet).
3. Cookieless asset requests get re-rolled by Traefik's weight → some land at lane B.
4. Lane B has no /assets/<hash>.js → 404 storm, blank page.

sticky.cookie alone cannot fix this — the race is structural.

Fix: add path-prefix routers at higher priority. Any request whose path uniquely belongs to one backend bypasses the weighted service entirely and goes straight to that backend. Only document-class requests (HTML, feeds, API, shared paths) run through the weighted+sticky service.

Architecture

Host(`yourdomain.com`)
│
├─ priority 200: PathPrefix(`/_next/`)    → next-backend     (always)
├─ priority 200: PathPrefix(`/assets/`)   → remix-backend    (always)
└─ priority 100: (no path filter)         → weighted+sticky  (50/50, 90/10, ...)
                                            ├─ next-backend
                                            └─ remix-backend

The weighted service writes the sticky cookie on its responses (typically HTML). Path-forced routers never touch the weighted service, so they neither read nor write the cookie — and their responses don't depend on it, by design.

Why SSH-scp the file instead of Dokploy's API

POST /api/settings.updateTraefikFile is the documented path but has bitten us twice:

• It does not accept an empty string when you want to disable a file (Zod rejects traefikConfig of length 0).
• A YAML that parses but fails Traefik's schema validation (e.g. http: {} as a "neutral" placeholder) makes Traefik's file provider refuse to build any dynamic config — every router on the host disappears, including the Dokploy panel itself. The panel is then unreachable to fix it. You need SSH access to recover.

Push files with scp and delete with rm. Traefik watches the directory and reloads in seconds.

Procedure

Phase 0 — prerequisites and backup

# Discover the two backends' internal hostnames and ports
curl -sS -H "x-api-key: $TOKEN" "https://<dokploy>/api/environment.one?environmentId=$ENV_ID" \
  | jq '.applications[] | {name, appName, port:(.domains[0].port // null)}'

# Backup everything you might touch
BAK=/tmp/traefik-backup-$(date +%Y%m%d-%H%M%S)
mkdir -p $BAK
ssh root@$HOST 'cat /etc/dokploy/traefik/dynamic/*.yml' > $BAK/all-dynamic.txt
ssh root@$HOST 'tar c /etc/dokploy/traefik/dynamic' > $BAK/dynamic.tar

Backend internal hostnames are the Dokploy appName (auto-generated, e.g. mxspace-shiroi-jpdr7k). They resolve inside Dokploy's docker network.

Phase 1 — dry-run on a canary host

Never test on the production hostname. Use a sibling subdomain that nothing depends on.

1. Add canary.yourdomain.com as a DNS record pointing at the Dokploy server (proxied via CDN is fine).
2. Write a dynamic file with Host(\canary.yourdomain.com`)`:

# /etc/dokploy/traefik/dynamic/canary-host.yml
http:
  routers:
    canary-next-static:
      rule: "Host(`canary.yourdomain.com`) && PathPrefix(`/_next/`)"
      service: canary-next-backend
      entryPoints: [websecure]
      tls: { certResolver: letsencrypt }
      priority: 200
    canary-remix-assets:
      rule: "Host(`canary.yourdomain.com`) && PathPrefix(`/assets/`)"
      service: canary-remix-backend
      entryPoints: [websecure]
      tls: { certResolver: letsencrypt }
      priority: 200
    canary-secure:
      rule: "Host(`canary.yourdomain.com`)"
      service: canary-weighted
      entryPoints: [websecure]
      tls: { certResolver: letsencrypt }
      priority: 100
    canary-web:
      rule: "Host(`canary.yourdomain.com`)"
      service: canary-weighted
      middlewares: [redirect-to-https]
      entryPoints: [web]
      priority: 100
  
    
      
        
          
             
             
             
             
        
           {  ,    }
           {  ,   }
    
      
         
         [{   }]
    
      
         
         [{   }]

3. Push and watch logs:

scp canary-host.yml root@$HOST:/etc/dokploy/traefik/dynamic/
ssh root@$HOST 'docker logs --since 30s dokploy-traefik 2>&1 | grep -iE "error|canary"'
# Expect: no errors. If you see "http cannot be a standalone element"
# or schema errors, fix the YAML and re-scp — Traefik will retry on its own.

4. Verify three things:

# (a) Cookieless distribution matches weights
for i in $(seq 1 20); do
  curl -sS "https://canary.yourdomain.com/?cb=$RANDOM" \
    | grep -oE "<distinguishing marker per backend>" | head -1
done | sort | uniq -c

# (b) Path-forced override: cross-cookie should still hit the right backend
curl -sS -o /dev/null -w "%{http_code}\n" \
  -H "cookie: canary_lane=<lane-A-hash>" \
  "https://canary.yourdomain.com/assets/<real-remix-file>.js"
# → 200 even though cookie says lane A

# (c) Sticky on document paths
COOKIE=$(curl -sS -i "https://canary.yourdomain.com/" \
  | grep -i "^set-cookie: canary_lane" | grep -oE "canary_lane=[a-f0-9]+")
for i in 1 2 3 4 5; do
  curl -sS -H "cookie: $COOKIE" "https://canary.yourdomain.com/" \
    | grep -oE "<distinguishing marker>"
done
# → 5/5 same backend

5. Open the canary URL in a real browser, DevTools Network panel open, hard-refresh, navigate a few internal routes. Watch for any /some-path/*.js → 404. If anything 404s, your asset prefix list is incomplete — add another path-forced router.

Phase 2 — promote to production

Once canary passes for at least a few hours of organic traffic:

1. Copy the canary file, rename, change the host:

sed 's|canary.yourdomain.com|yourdomain.com|g; s|canary-|prod-|g; s|canary_lane|prod_lane|g' \
  canary-host.yml > prod-host.yml

2. Start with a conservative weight — 90/10 stable side first.

3. Push:

scp prod-host.yml root@$HOST:/etc/dokploy/traefik/dynamic/

4. Leave the old Dokploy-managed Application domain in place as a fallback. The new file's priority: 100 outranks the default (Traefik priority defaults to rule length, ~17 for a Host-only rule), so the weighted router wins. If your weighted file ever breaks, Traefik silently falls back to the lower-priority Dokploy router → 100% old backend. This is the kind of safety net you want during a migration.

5. Verify externally (via CDN):

bash -c '
a=0; b=0
for i in $(seq 1 20); do
  m=$(curl -sS "https://yourdomain.com/?cb=$RANDOM-$i" \
        | grep -oE "<marker A>|<marker B>" | head -1)
  case "$m" in
    "<marker A>") a=$((a+1));;
    "<marker B>") b=$((b+1));;
  esac
done
echo "A=$a B=$b"
'

6. Purge the CDN cache for the host (Cloudflare: dashboard → Caching → Purge → https://yourdomain.com/*). Otherwise the CDN may serve stale HTML from before the split, hiding the change for hours.

Phase 3 — adjust weight

Either edit on the server (fastest) or scp a new file:

ssh root@$HOST 'sed -i \
  "s/weight: 90$/weight: 70/; s/weight: 10$/weight: 30/" \
  /etc/dokploy/traefik/dynamic/prod-host.yml'

Traefik picks the change up within ~5 seconds. No restart required.

Cadence rule of thumb: 90/10 → observe a day → 70/30 → observe a day → 50/50 → observe → 10/90 → 100/0 then delete the file.

Phase 4 — rollback (instant)

ssh root@$HOST 'rm /etc/dokploy/traefik/dynamic/prod-host.yml'

Traefik immediately falls back to the Dokploy-managed Application router (100% the original backend). No data lost, no certs to re-issue. If you also need to clear in-flight stickied users, purge the CDN cache and tell users to clear their cookie for the host.

Critical gotchas (paid for in incidents)

Gotcha	What happens	Avoid by
Disabling via http: {} placeholder	Traefik schema rejects the file → entire dynamic config build fails → all routers (including Dokploy panel) return 404 → panel becomes unreachable to fix it via UI/API. Requires SSH recovery.	Disable by deleting the file (rm), never by writing a "neutral" placeholder.
Empty string sent to settings.updateTraefikFile API	Zod rejects traefikConfig of length 0.	Same as above — manage files via scp + rm.
Reading from Cloudflare cache during canary verification	A cf-cache-status: HIT, age: 7m response can convince you the split works perfectly when actually all traffic is the cached HTML from one backend.	Always send ?cb=$RANDOM cache buster and confirm cf-cache-status: DYNAMIC (or test from inside the server bypassing CDN).
Backing service deleted from a @file reference	If weighted.services[].name: foo@file and foo's file gets rewritten or deleted (e.g. when you remove a Dokploy domain), the weighted service references a non-existent backend → 502.	Inline backend loadBalancer definitions in your own canary file. Don't depend on Dokploy-managed files.
Removing the Dokploy Application domain "to keep things clean"	Triggers Dokploy to rewrite/delete that app's dynamic file. If your weighted file references it via @file, broken. Even if you inlined, you lose the priority-default fallback router.	Leave the Dokploy-managed domain. Your weighted router at priority 100 will outrank it; it's a free safety net.
Same cookie name across canary host and prod host	Browser sends one cookie to both, possibly steering users into wrong lane on whichever host they hit second.	Use distinct cookie names (canary_lane, prod_lane).
Asset path collision between backends (/favicon.ico, /manifest.json, /robots.txt)	Both backends serve these paths with different bytes. Sticky cookie keeps each user consistent within a session, but anonymous CDN hits may flap.

File reference (canonical template)

# /etc/dokploy/traefik/dynamic/<host>-canary.yml
http:
  routers:
    <host>-prefix-A:
      rule: "Host(`<host>`) && PathPrefix(`/<unique-prefix-A>/`)"
      service: <host>-backend-A
      entryPoints: [websecure]
      tls: { certResolver: letsencrypt }
      priority: 200
    <host>-prefix-B:
      rule: "Host(`<host>`) && PathPrefix(`/<unique-prefix-B>/`)"
      service: <host>-backend-B
      entryPoints: [websecure]
      tls: { certResolver: letsencrypt }
      priority: 200
    <host>-secure:
      rule: "Host(`<host>`)"
      service: <host>-weighted
      entryPoints: [websecure]
      tls: { certResolver: letsencrypt }
      priority: 100
    <host>-web:
      rule: "Host(`<host>`)"
      service: <host>-weighted
      middlewares: [redirect-to-https]
      entryPoints: [web]
      priority: 100
  services:
    
      
        
          
             
             
             
             
        
           {  ,   }
           {  ,   }
    
      
         
         [{   }]
    
      
         
         [{   }]

Quick verification commands

# Live weight distribution (20 hits, no cookie)
bash -c '
a=0; b=0
for i in $(seq 1 20); do
  m=$(curl -sS "https://<host>/?cb=$RANDOM-$i" \
        | grep -oE "<marker A>|<marker B>" | head -1)
  case "$m" in "<marker A>") a=$((a+1));; "<marker B>") b=$((b+1));; esac
done
echo "A=$a B=$b"
'

# Sticky verification — same cookie 5x → same backend 5x
COOKIE=$(curl -sS -i "https://<host>/" | grep -i "^set-cookie: <host>_lane" \
         | grep -oE "<host>_lane=[a-f0-9]+")
for i in 1 2 3 4 5; do
  curl -sS -H "cookie: $COOKIE" "https://<host>/" \
    | grep -oE "<marker A>|<marker B>"
done

# Traefik error scan
ssh root@$HOST 'docker logs --since 5m dokploy-traefik 2>&1 \
  | grep -iE "error|invalid|cannot"'