sop-ddm-finetuning

name	sop-ddm-finetuning
description	Fine-tune DDM-Net temporal boundary detector for SOP monitoring. Use when you need to launch and monitor a DDM-Net training run with a given dataset ID.
argument-hint	<dataset_id>
license	CC-BY-4.0 AND Apache-2.0

SOP DDM-Net Fine-tuning

You are performing DDM-Net fine-tuning for an SOP (Standard Operating Procedure) monitoring system. DDM-Net is a dual-domain matching temporal boundary detector built on ResNet-50 that learns to segment SOP video into procedural steps.

Your job is to validate the environment, launch training, monitor it to completion, and write a training report. Training logs are persisted by the service at assets/results/<job_id>/log.txt.

Input

The user provides a dataset_id as $ARGUMENTS. This is the subdirectory name under assets/data/ containing the training videos and annotations.

If no argument is provided, list available datasets and ask the user which to use:

ls assets/data/

IMPORTANT — also ask for a validation_dataset_id. The DDM service's /api/v1/fine-tuning/start endpoint accepts a separate validation_dataset_id query parameter. If omitted, the service silently defaults validation_dataset_id = dataset_id, which causes training-time val/f1_score to be measured on the literal training set (the service generates byte-identical ddm_train_annotation.json and ddm_val_annotation.json from the same source). The resulting val/F1 number does not reflect generalization and is unreliable for early-stop decisions. Always pass a truly held-out dataset as validation_dataset_id. If the user has no held-out dataset prepared, warn loudly and continue only after the user confirms they understand the limitation (see "Known Limitation" below).

For reference on model architecture, log format, API endpoints, and config parameters, see ${CLAUDE_SKILL_DIR}/reference.md.

Known Limitation

The DDM service silently uses the training set as the validation set when validation_dataset_id is not provided. This is a service-side default in microservices/ddm_training_ms/app.py:

if validation_dataset_id is None or validation_dataset_id == "":
    validation_dataset_id = dataset_id   # silent fallback

Both generate_ddm_annotation calls then resolve to the same dataset path and produce identical ddm_train_annotation.json and ddm_val_annotation.json. The reported val/f1_score will therefore be inflated and you cannot judge whether the resulting DDM checkpoint generalizes to unseen videos until E2E evaluation runs.

Mitigation: always pass a separate held-out validation_dataset_id (typically the same dataset you intend to use for E2E evaluation). Import that dataset first via scripts/import_dataset.sh so its per-video annotations are available to the service.

Defaults

• BASE_URL: http://localhost:${DDM_TRAINING_BACKEND_PORT:-32100} (resolve DDM_TRAINING_BACKEND_PORT from .env if present; fall back to 32100)
• RESULTS_ROOT: assets/results/ (host) ↔ /workspace/sop-ddm-ftms/assets/results/ (container)
• DATA_ROOT: assets/data/ (host) ↔ /workspace/sop-ddm-ftms/assets/data/ (container)
• CONFIG: assets/config/ddm_train_config.yaml — users edit this directly to tune batch_size, resolution, epochs, num_gpus, workers. Do NOT edit anno_path, data_root, output, exp_name (auto-set by the service).

Fine-tuning Procedure

Phase 1: Pre-flight Checks

Before starting training, verify environment readiness:

1. Start the training service from the training blueprint root (the session's working directory — do NOT cd into any subdirectory):

   docker compose up -d ddm-training-microservice
   

   The top-level docker-compose.yml includes the database dependency (metadata_db). Running from a subdirectory (e.g. microservices/ddm_training_ms/) will miss it.

   Then verify health by polling until ready (retry a few times with short delays):

   curl -s <base_url>/health
   

   If the service fails to become healthy after retries, report the error and stop.

2. Check for running jobs:

   curl -s <base_url>/api/v1/fine-tuning/all_jobs
   

   If any job has status running or queued, warn the user and ask whether to wait or cancel before proceeding.

3. Verify the dataset directory at assets/data/<dataset_id>/:

   Expected structure:

   assets/data/<dataset_id>/
   ├── <video_id>.mp4
   ├── <video_id>/
   │   └── <video_id>_annotation.json
   ├── <video_id2>.mp4
   ├── <video_id2>/
   │   └── <video_id2>_annotation.json
   └── ...
   

   Check video and annotation counts:

   ls assets/data/<dataset_id>/*.mp4 2>/dev/null | wc -l
   find assets/data/<dataset_id> -name "*_annotation.json" | wc -l
   

   Expected: video count == annotation count, both > 0.

   Auto-fix policy: for obvious, non-destructive, reversible issues, fix them in place and announce what you did — do NOT prompt for confirmation. Hard failures (empty directory, missing directory) still stop with an error message.

   • Uppercase .MP4 files — the dataset generator only globs *.mp4; uppercase files are silently skipped. Auto-rename to lowercase:

     UPPER=$(ls assets/data/<dataset_id>/*.MP4 2>/dev/null | wc -l)
     if [ "$UPPER" -gt 0 ]; then
        f  assets/data/<dataset_id>/*.MP4;    ; 
        
     
     

Report all pre-flight results before proceeding. For auto-fixable issues (uppercase .MP4, annotation stem mismatches), apply the fix in place and announce what you did — do NOT prompt for confirmation. For hard failures (service unreachable, insufficient GPUs, empty dataset directory), stop and tell the user what to fix.

Phase 2: Training and Monitoring

1. Print a one-block effective summary for traceability (no confirmation prompt):

   === DDM Training — Effective Config ===
   dataset_id : <dataset_id>
   host path  : assets/data/<dataset_id>    (videos: N, annotations: N)
   batch_size : N    resolution: N
   num_gpus   : N    workers: N
   epochs     : N
   

   Values come from assets/config/ddm_train_config.yaml. Flag any parameter outside the normal ranges in reference.md as a one-line note underneath (e.g. note: epochs=200 is above typical 10–50 range).

2. Start training:

   curl -s -X POST "<base_url>/api/v1/fine-tuning/start?dataset_id=<dataset_id>&validation_dataset_id=<validation_dataset_id>"
   

   Always include validation_dataset_id — omitting it triggers the silent fallback described in "Known Limitation" and produces an unreliable val/f1_score. The held-out validation dataset must be a different dataset that has been imported into the BP (run scripts/import_dataset.sh <val_dataset_path> first). Record the job_id from the response.

3. Locate the log file: assets/results/<job_id>/log.txt.

4. Monitor training progress via the status endpoint:

   curl -s "<base_url>/api/v1/fine-tuning/status/<job_id>"
   

   Extract: status, progress, current_step, total_steps, loss.

5. Parse val/f1_score from the log alongside status polling (the status API may not include this metric):

   grep -E "Epoch [0-9]+, global step [0-9]+: 'val/f1_score'" assets/results/<job_id>/log.txt | tail -5
   

6. Report progress every 10% with:

   • Current epoch / total epochs and progress percentage
   • Latest val/f1_score and best val/f1_score seen so far
   • Any anomalies detected

7. Monitor for anomalies periodically:

Phase 3: Summary

After training completes, collect metrics and write a training report.

3a: Collect Final Metrics

1. Parse val/f1_score history from the log:

   grep -E "Epoch [0-9]+, global step [0-9]+: 'val/f1_score'" assets/results/<job_id>/log.txt
   

   Extract: best val/f1_score, the epoch it was achieved, and the final epoch's score.

2. Collect checkpoint paths saved during training:

   grep "saving model to" assets/results/<job_id>/log.txt | tail -5
   

3b: Write Training Report

Save a formatted training report to assets/results/<job_id>/training_report.md:

# DDM-Net Training Report

## Overview
| Field | Value |
|-------|-------|
| Model | DDM-Net (ResNet-50, dual-domain matching) |
| Dataset | <dataset_id> |
| Job ID | <job_id> |
| Status | completed / failed / cancelled |
| Duration | Xh Xm |

## Training Metrics
| Metric | Value |
|--------|-------|
| Best val/f1_score | X.XXXXX (epoch N) |
| Final val/f1_score | X.XXXXX |
| Total Epochs | N |

## Config
| Parameter | Value |
|-----------|-------|
| Batch Size | N |
| Resolution | N |
| Num GPUs | N |
| Workers | N |
| Epochs | N |

## Checkpoints
- <list checkpoint paths from log>

## Anomalies
- List any OOM events, CUDA errors, or exceptions detected during training.
- "None" if no anomalies detected.

## Artifacts
- **Log:** `assets/results/<job_id>/log.txt`
- **Report:** `assets/results/<job_id>/training_report.md`

3c: Output Summary

Print the training report content to the user. If training failed, include the relevant error lines from the log.