zero

name	zero
description	Use Zero for capabilities beyond Hermes.
author	Zero
license	MIT
platforms	["linux","macos","windows"]
metadata	{"hermes":{"tags":["zero","capability-search","mcp","x402"],"category":"automation"}}

zero

Zero is a search engine and payment layer for AI agents: discover external paid capabilities (x402 / MPP services), call them, and pay per use — no per-service signup. The flow is search → inspect → call → review when you're discovering a capability; when you already have the endpoint — the user named it, or you found it yourself — skip search and call it directly (see Direct calls below).

When to use it: as the fallback for anything genuinely beyond your native abilities — before telling the user "I can't do that," run a zero search. When NOT to use it: for things you already handle yourself — writing code, answers from your own knowledge, local files, shell commands, math. Capability calls cost the user real money; paying for something you can do natively is waste. If you can do it yourself, just do it.

Two surfaces give you Zero:

• The runner — the zero CLI, provisioned by the plugin/extension for this session or installed standalone by the user (see Resolving zero). This is your primary tool: it runs the whole loop, handles 402 payment (including cross-chain), streams binary output, and enforces spend caps.
• The MCP connector (https://mcp.zero.xyz) — the Zero connector tool surface. Its job is authentication and funding, not the loop. In ephemeral/sandbox environments it is also the only way to authenticate the runner (see below).

Resolving zero

Every example below invokes the runner as plain zero, and that is also what you should type in real commands whenever it resolves: users read your commands, and zero search … reads like a normal CLI where "$ZERO_RUNNER" search … reads like machinery. The name is generic, though, so resolve it once, before your first call — don't trust $PATH blindly. Take the first tier that resolves to a working executable, then use the same spelling everywhere zero appears below:

1. zero on $PATH — preferred. Either the provisioned runner (the SessionStart hook prepends its directory to PATH: immediately on hosts that persist hook env vars, in new shells elsewhere) or a standalone CLI install (npm install -g @zeroxyz/cli). Trust it without further checks when command -v zero matches $ZERO_RUNNER or points into $HOME/.zero/runtime/bin; any other path counts only if zero --help prints the Zero CLI header (Zero CLI — Search engine for AI agents). Anything else → fall through.
2. $ZERO_RUNNER — the runner's absolute path, exported by the SessionStart hook on hosts that persist hook env vars (Claude Code, Codex). The fallback spelling when bare zero doesn't resolve yet or failed the check above.
3. $HOME/.zero/runtime/bin/zero — the provisioned runner's well-known path, for hosts that don't persist hook env vars (e.g. Gemini CLI); the SessionStart hook reports it.
4. npx -y @zeroxyz/cli@latest — ephemeral/sandbox environments only, where nothing is provisioned or installed (see Ephemeral / sandbox below).

ZERO="$(command -v zero || true)"                     # tier 1 — verify per the rules above
[ -n "$ZERO" ] || ZERO="${ZERO_RUNNER:-}"
[ -x "$ZERO" ] || ZERO="$HOME/.zero/runtime/bin/zero"

When tier 1 wins, invoke it as plain zero; on the lower tiers use the absolute path (which also survives shells that don't persist variables between commands).

If no tier resolves in a persistent environment, tell the user Zero isn't available here — don't install the CLI yourself. In an ephemeral sandbox, fall through to npx. Never generate a private-key wallet yourself either way (managed wallets come from auth — see below).

The runner

The runner is the published @zeroxyz/cli. Under the plugin/extension it's installed once per session into a shared, plugin-owned home and reported by its absolute path (also exported as $ZERO_RUNNER on hosts that persist hook env vars; default path ~/.zero/runtime/bin/zero); a standalone npm install -g @zeroxyz/cli serves the same role. Either way you do not install, update, or configure it yourself, and the runner needs no wallet setup. Identity comes from a session (below); signing is managed server-side.

Prefer the runner for every step of the loop, even when MCP search/get/fetch tools are also available. The runner is the complete, auditable path: it pays 402 challenges automatically, applies --max-pay caps, separates body from progress on stdout/stderr, and writes binary responses to disk. Use the connector only for what the runner can't do itself: authenticating in a sandbox, and funding.

Authentication

Before touching any auth command, decide who the account is for:

• A human is present (or asked you to sign them in) → zero auth login. It's the device flow below and creates their account on first sign-in; zero auth register is an alias for the same command, not a separate signup.
• Fully autonomous — no human in the loop → zero auth agent register. Anonymous account plus a managed wallet, no browser, no one to hand a URL to.
• Never use zero auth agent register when a human is present — it mints an account owned by no one (a human can only take it over later via the claim flow). If there's a human, zero auth login already creates their account.

Beyond that, the environment picks the mechanics.

Persistent — the user's own computer (not a sandbox or cloud runner)

Authenticate the runner with the device-code login. It's non-interactive and agent-friendly: you start it, show the user a URL, then run the finish step — which polls on its own until they authorize. No browser is opened on the machine running the agent, and you do not wait for the user to tell you they're done — the finish command blocks until it knows.

# 1. Start: prints a URL + user code and exits immediately (no waiting, no browser).
zero auth login --start --json
# → {"deviceCode":"…","userCode":"WXYZ-1234","verificationUri":"https://…",
#    "url":"https://…?code=WXYZ-1234","pollInterval":5,"expiresAt":…}

# 2. Show the user the "url" (and the userCode) and ask them to authorize it in their browser.

# 3. Immediately run finish. It BLOCKS and polls (~every 2s) until the user authorizes, then
#    persists the session. Run it right after step 2 — do NOT pause to ask "are you done yet?";
#    the command returning is your signal.
zero auth login --finish <deviceCode> --json
# → {"status":"ok","user":{"id":"…","email":"…"}}     once authorized
# → {"status":"expired"}                                if the ~10 min code TTL lapses first

Treat the finish command's return as the source of truth: a successful exit means the session is already persisted; {"status":"expired"} means the code lapsed — start over from step 1. Never block the conversation polling by hand or waiting on the user to confirm; --finish is the poll.

The session is saved to the shared ~/.zero/config.json, so authenticating once here also signs you in everywhere Zero is used on this machine — the standalone zero CLI and your other agents all share the one login.

Check identity any time with zero auth whoami.

Autonomous — no human in the loop (zero auth agent register)

When there is genuinely no human to send to a browser, register an anonymous agent account:

zero auth agent register --json
# → {"status":"ok","registrationId":"…","userId":"…","walletAddress":"0x…",
#    "claimTokenExpires":"…"}

One command, no browser, no waiting. What you get:

• A signed-in session, persisted to ~/.zero/config.json like any other login.
• A managed wallet, created at signup — you can search, get, fetch, and pay immediately. It starts empty: fund it with zero wallet fund (--no-open prints the funding URL instead of opening a browser; the link is one-time use).
• A claim token, saved in ~/.zero/config.json — a human's future path to owning this account. It expires (the deadline is printed at registration and stored as claimTokenExpires in the config), and an unclaimed account is cleaned up after the registration expires — so hand the account to a human (below) before then if the work should outlive it.

If it errors with "Already signed in", there's an existing session — don't stack a fresh anonymous account on top of it.

Claim handoff — zero auth agent claim <email>

When a human should own an agent-registered account, link it to them. The ceremony is the reverse of the device flow: the hosted claim page shows the human a pairing code, they read it back to you, and you complete with the code.

# 1. Start: prints the hosted claim URL.
zero auth agent claim [e-mail]

# 2. Send the human the URL. They sign in as that email and the page shows THEM a pairing code.

# 3. They read the code back to you. On a TTY the command prompts for it inline; in
#    non-interactive runs, complete with a second invocation:
zero auth agent claim [e-mail] --code <code>

--code completes the attempt already in flight — re-running without --code mints a fresh link and invalidates the code the human is holding. After the claim, the account belongs to the human, every pre-claim session is revoked, and the CLI rotates onto fresh credentials automatically — nothing to re-run. If the start step fails, the claim token has likely expired (check claimTokenExpires in ~/.zero/config.json).

Ephemeral / sandbox — cloud, CI, web/mobile sandbox runners

A device-code login won't work — the environment can't hold a persisted session. Run the published @zeroxyz/cli directly and authenticate via the MCP connector's authorize tool.

Code execution is required. This whole path runs the CLI in a shell; if the environment can't execute commands, stop and have the user enable it.

Egress (reactive, not a gate). zero fetch calls each capability's own URL on arbitrary domains, so the environment needs unrestricted outbound access — not just the npm registry and *.zero.xyz. A Zero-only allowlist passes search/get and then breaks every fetch. Don't verify this up front. If a fetch hangs or fails with a DNS/connection error, restricted egress is the first thing to suspect: have the user select "All domains" (or the equivalent unrestricted-egress option). Reaching *.zero.xyz alone doesn't prove arbitrary-domain egress.

1. Get the runner — install once, don't npx per call. Per-call npx -y @zeroxyz/cli@latest re-resolves the package every time (~2–3s each, even warm) and prints npm notices to stderr. If the sandbox filesystem persists across commands — most do, even when each command runs in a fresh shell — install once and call the bare binary:

   npm install -g @zeroxyz/cli@latest    # ~1s cached; puts `zero` on PATH
   zero --help                            # ~0.9s/call thereafter
   

   Only if the filesystem is reset between commands (no install survives) fall back to npx -y @zeroxyz/cli@latest everywhere zero appears below.

2. Authorize. If the connector (https://mcp.zero.xyz) isn't available as a tool yet, walk the user through adding it and the one-time consent. Then call its authorize tool to get a short-lived authorization code.

3. Exchange the code for a session token — without printing it. The code from authorize is one-time; the reusable credential is the session token that zero auth exchange returns. The command writes the bare token to stdout precisely so you can capture it straight to disk. Never run it bare, echo/cat the token, or paste it into the conversation — the token must not land in the transcript. The token file lives on disk, so — like the install above — it survives a fresh shell; the axis that matters is filesystem persistence, not env persistence.

   # Typical harness: fresh shell per command (env vars don't carry over), persistent filesystem.
   # Write the token to an owner-only file once, then load it per call:
   (umask 077; zero auth exchange <code from authorize> > /tmp/zero-session-token)
   ZERO_SESSION_TOKEN="$(cat /tmp/zero-session-token)" zero search "…"
   

   Every CLI call picks ZERO_SESSION_TOKEN up from the environment. (auth exchange --json emits {token, expiresAt} instead, if you need the expiry.)

4. Re-mint when it expires. The token is short-lived and has no refresh path. If calls start failing with an auth error mid-task, call authorize again, re-run auth exchange, and re-capture ZERO_SESSION_TOKEN the same way.

5. Reviewing across a fresh shell. The runId on fetch's stderr is gone by the next command in a fresh-shell harness — so capture it from the --json envelope at call time (see Output handling) and review by runId rather than re-deriving the slug (see Reviews — what to write).

Bring-your-own signing

If the user supplies their own wallet key, set ZERO_PRIVATE_KEY=0x… in the environment. It takes precedence for signing and works alongside either identity path above. Only use a key the user explicitly provides; never generate one.

Funding

Funding is managed server-side. If a call fails for insufficient balance, point the user to https://www.zero.xyz/profile to fund their Zero account. On an agent-registered account there is no signed-in human profile — use zero wallet fund --no-open and relay the one-time funding URL instead.

Direct calls

Zero works on any endpoint, not just indexed ones. Whenever you already have a specific URL to call — the user named it, or you discovered it yourself (e.g. a storefront or API you found while browsing) — call it directly: zero fetch <url>. Being absent from Zero's index is no reason to refuse it or to swap in a different, indexed capability instead. Search is for when you need to find a capability; don't insist on it when you already know what to call.

A --capability value (token, slug, or uid) comes from zero search or a capability's page, so you won't have one for a URL you reached this way — omit it and just pass the URL. The server matches the URL to a capability on its own for attribution when it recognizes it; if it doesn't, the call still runs, it just isn't recorded as a reviewable run.

The loop

1. Search — zero search "weather forecast". Always re-search; capabilities, prices, and rankings churn. Never reuse URLs/schemas/prices from memory or earlier in the conversation. Each result includes a short attribution token (token field, format z_xxx.N where N is the 1-based position). Use this token — not the position number — in subsequent steps; it encodes the search context so the run is tied back to the originating search for attribution.
2. Inspect — zero get <token> --formatted (e.g. zero get z_Ab12cd.1) prints a human summary plus a copy-pasteable Try it: line. Plain zero get <token> returns full JSON (URL, method, bodySchema, examples, pricing). You can also pass a slug or uid. If bodySchema is null, skip that result — don't invent field names.
3. Call — zero fetch <url> --capability <token> [-d '<json>'] [-H 'k:v'] [--max-pay 0.50]. Pass --capability <token> so the run is recorded and attributed to the search. 402 responses are paid automatically (x402 + MPP, including cross-chain bridging from Base to Tempo).
4. Review — zero review <runId> --success --accuracy N --value N --reliability N --content "<observation>". --success (or --no-success when the capability failed) is required — the command errors without one. The runId is printed to stderr (or in the --json envelope). Always review after a paid call.

Request shape

Read bodySchema from zero get first. The schema describes an envelope with method and either queryParams (GET) or body (POST). Translate it into a real HTTP call — do not send the envelope as the body.

GET — encode queryParams as query string:

zero fetch "https://api.example.com/locate?ip=8.8.8.8"

POST — send input.body as JSON:

zero fetch https://api.example.com/translate \
  -d '{"text":"hello","to":"es"}' \
  -H "Content-Type:application/json"

zero fetch flags

Flag	Use
-X <verb>	Force HTTP method. Defaults to POST when -d is set, else GET.
-d <body>	Inline JSON, @./file, or @-/--data-stdin. Implies POST + sets Content-Type: application/json if you didn't pass -H.
-H 'k:v'	Repeatable. Caller-provided auth/API keys the capability requires.
--max-pay <usdc>	Hard spend cap per call. Set this before unfamiliar or per-call-priced capabilities.
--timeout <seconds>	Per-request timeout (default 60), applied to each HTTP leg — probe and paid retry — not as a wall-clock deadline. Raise it up front for slow capabilities (image/video/audio often need --timeout 300) so the call doesn't die at 60s after payment.
--json	{runId, ok, status, latencyMs, payment, body, bodyRaw} envelope on stdout. Use ok, not status, for success. body is parsed JSON; bodyRaw is the literal text.
--raw-body	With --json, keep body as the raw string.
--capability <id>	Attribution token (z_xxx.N from search), slug, or uid — records the run and attributes it to the search. Pass it whenever you have one: the token from search results, or a slug/uid you already hold. You won't have any of these for a URL you reached without searching (see Direct calls) — omit it and the server attributes the URL itself when it can.

-d rejects bodies over 10 MB. Inline -d '<long-json>' past ~1 MB hits shell arg limits — use -d @file or --data-stdin.

Output handling

zero fetch separates streams:

• stdout — response body only (or --json envelope, or binary bytes — redirect with > out.png for images/audio/PDF).
• stderr — progress, payment info, the Run ID: line, warnings.

zero fetch "<url>" | jq .                    # body on stdout
zero fetch --json "<url>" | jq 'select(.ok)' # programmatic
zero fetch "<image-url>" > out.png           # binary

Capture the runId from the --json envelope ({runId, ok, …}) rather than scraping it from stderr — it's the handle zero review needs, and a prior call's stderr may be gone by the time you review (especially in a fresh-shell harness).

Reviews — what to write

--content is free-form, optional, and strongly encouraged when you have a specific observation. It lands on the capability's public page on zero.xyz, so it doubles as signal for the next agent and copy for human buyers.

Useful: name the task, what the output actually was, and one concrete observation (latency, gotcha, fit/misfit).

"Generated the requested gremlin-on-couch image faithfully in ~140ms. Schema straightforward, output URL loaded cleanly. At $0.003 the price-to-quality ratio is excellent."

"FLUX Schnell returned HTTP 500 — paid 0.003 USDC via MPP but got no image." (pair with --no-success)

Skip --content rather than write filler ("Worked great", "Fast"). Submit numeric ratings alone if you have nothing specific.

Every review needs an outcome flag or the command errors: --success when the call delivered, --no-success --content "<what broke>" when the capability failed. Skip review only if the failure was a CLI-internal bug (e.g. No client registered for x402 version: N) — file zero bug-report instead.

Review by runId (from the fetch --json envelope). zero review --capability <slug> can auto-resolve to your most recent unreviewed run, but only with the exact recorded slug — which is host-prefixed and hash-suffixed (e.g. image-withzero-xyz-…-f422560b), not guessable. Lost the runId? zero runs --unreviewed lists every pending run with its slug.

Gotchas

Quick pre-flight, each detailed above: re-search every time; zero get before every zero fetch; encode GET queryParams as a query string (don't POST the envelope); skip bodySchema: null rather than guess fields; check ok, not status; set --max-pay on anything unfamiliar; raise --timeout for slow image/video/audio so the call doesn't die after payment; every zero review needs --success/--no-success; pass --capability <token|slug|uid> whenever you have one.

• --capability drives review attribution — after a search, pass the z_xxx.N token so the run ties back to it; that keeps the capability's reliability signal fresh and lets you review it. If you already hold a slug/uid but didn't search, pass that. For a URL you reached without either (see Direct calls) you have nothing to pass — omit it; the server attributes the URL when it can, and only a URL it can't resolve ends up as an unreviewable run.
• Before ending a multi-call task, run zero runs --unreviewed and review anything you missed.
• Zero reminder injected twice per prompt? A plugin install and a standalone install (zero init) are coexisting; the harness may also warn the user about a shadowed Zero skill or hook. Harmless — don't fix it by deleting files. If the user wants the duplicate gone, zero uninstall removes the standalone copy — machine-wide, for every app reading the shared ~/.claude/~/.agents directories — so offer it, don't run it unprompted.

End-to-end

zero search "sentiment analysis"
# Each result shows a token (z_xxx.N) — use it as the capability reference
zero get z_Ab12cd.1 --formatted
zero fetch https://nlp-api.example.com/sentiment \
  --capability z_Ab12cd.1 \
  -d '{"text":"Zero is great"}' \
  -H "Content-Type:application/json"
# Run ID printed on stderr (also in --json envelope as .runId)
zero review abc123 --success --accuracy 5 --value 4 --reliability 5 \
  --content "Classified a 200-char product-review snippet positive in ~180ms; matched manual read. Clean schema, no auth."

Reporting Zero platform bugs

zero bug-report "<what broke>" — only when the user explicitly asks ("file a bug"). For Zero-side issues (bad ranking, wrong indexed URL, billing off, CLI misbehavior). Never substitute it for zero review — capability quality always belongs in a review.