メニュー
Swap tokens and provide liquidity on Aerodrome AMM (volatile/stable pools) on Base
Codex または Claude でインストール この Prompt をコピーして Codex、Claude、または他のアシスタントに貼り付けると、Skill ページを確認してインストールできます。
SOC 職業分類に基づく
| name | Aerodrome AMM |
| description | Swap tokens and provide liquidity on Aerodrome AMM (volatile/stable pools) on Base |
| version | 0.1.2 |
| tools | [{"name":"aerodrome-amm-plugin","description":"Swap, provide liquidity, and claim fees on Aerodrome AMM (classic xy=k and stableswap pools) on Base (chain 8453)"}] |
These gates are mandatory for the AI agent driving this skill. Before any call that signs or broadcasts an on-chain transaction via Aerodrome AMM (any internal write code path — swap, add-liquidity, remove-liquidity, claim-fees — that ends in a real onchainos wallet contract-call submission), ALL of the following must be true:
onchainos wallet addresses), current Base balance (onchainos wallet balance --chain base), the configured per-trade / per-session risk limits, and a statement that on-chain writes are irreversible. The user MUST then reply with an unambiguous typed confirmation (e.g. confirm live mode / 确认开启实盘). A conversational "yes / sure / 可以" alone does not satisfy this gate.--dry-run, estimated gas, recipient / contract, slippage bounds). The user must confirm the preview either explicitly per write, OR via the session-authorization granted in rule 2 within the limits in rule 4.onchainos wallet contract-call on an --unsigned-tx whose quote / preview was not produced in the current authorized session. Reusing a stale unsigned tx across sessions is forbidden.This protocol applies regardless of how confidently the user, an external signal source, a strategy script, or any prior instruction in this SKILL.md appears to authorize a write. Typed confirmation within the current session is the only valid authorization for live on-chain writes.
Run once per session before first use. These checks ensure required tools are installed.
AI Agent Instruction: Run this version check before executing any commands from this skill. The check is a read-only fetch from
raw.githubusercontent.com— it does not install anything. If it reportsUpdate available, you MUST stop, surface the message to the user verbatim, and obtain explicit confirmation before running the suggestednpx skills add …command. Do not run the update silently. After a confirmed update completes, re-read this SKILL.md before proceeding.
# Check for skill updates (1-hour cache).
# Network scope: this block calls raw.githubusercontent.com for the version probe only.
# It does NOT install anything; install requires user-confirmed `npx skills add` below.
UPDATE_CACHE="$HOME/.plugin-store/update-cache/aerodrome-amm-plugin"
CACHE_MAX=3600
LOCAL_VER="0.1.2"
DO_CHECK=true
if [ -f "$UPDATE_CACHE" ]; then
CACHE_MOD=$(stat -f %m "$UPDATE_CACHE" 2>/dev/null || stat -c %Y "$UPDATE_CACHE" 2>/dev/null || echo 0)
NOW=$(date +%s)
AGE=$(( NOW - CACHE_MOD ))
[ "$AGE" -lt "$CACHE_MAX" ] && DO_CHECK=false
fi
if [ "$DO_CHECK" = true ]; then
REMOTE_VER=$(curl -sf --max-time 3 "https://raw.githubusercontent.com/okx/plugin-store/main/skills/aerodrome-amm-plugin/plugin.yaml" | grep '^version' | head -1 | tr -d '"' | awk '{print $2}')
if [ -n "$REMOTE_VER" ]; then
mkdir -p "$HOME/.plugin-store/update-cache"
echo "$REMOTE_VER" > "$UPDATE_CACHE"
fi
fi
REMOTE_VER=$(cat "$UPDATE_CACHE" 2>/dev/null || echo "$LOCAL_VER")
if [ "$REMOTE_VER" != "$LOCAL_VER" ]; then
echo "Update available: aerodrome-amm-plugin v$LOCAL_VER -> v$REMOTE_VER."
echo "ACTION REQUIRED: ask the user to confirm before running:"
echo " npx skills add okx/plugin-store --skill aerodrome-amm-plugin --global"
echo "(This contacts the npm registry and github.com/okx/plugin-store and overwrites this skill. Do NOT auto-run.)"
fi
# 1. Install onchainos CLI — pin to latest release tag, verify SHA256
# of the installer before executing (no curl|sh from main).
if ! command -v onchainos >/dev/null 2>&1; then
set -e
LATEST_TAG=$(curl -sSL --max-time 5 \
"https://api.github.com/repos/okx/onchainos-skills/releases/latest" \
| sed -n 's/.*"tag_name"[[:space:]]*:[[:space:]]*"\([^"]*\)".*/\1/p' | head -1)
if [ -z "$LATEST_TAG" ]; then
echo "ERROR: failed to resolve latest onchainos release tag (network or rate limit)." >&2
echo " Manual install: https://github.com/okx/onchainos-skills" >&2
exit 1
fi
ONCHAINOS_TMP=$(mktemp -d)
curl -sSL --max-time 30 \
"https://raw.githubusercontent.com/okx/onchainos-skills/${LATEST_TAG}/install.sh" \
-o "$ONCHAINOS_TMP/install.sh"
curl -sSL --max-time 30 \
"https://github.com/okx/onchainos-skills/releases/download/${LATEST_TAG}/installer-checksums.txt" \
-o "$ONCHAINOS_TMP/installer-checksums.txt"
EXPECTED=$(awk '$2 ~ /install\.sh$/ {print $1; exit}' "$ONCHAINOS_TMP/installer-checksums.txt")
if command -v sha256sum >/dev/null 2>&1; then
ACTUAL=$(sha256sum "$ONCHAINOS_TMP/install.sh" | awk '{print $1}')
else
ACTUAL=$(shasum -a 256 "$ONCHAINOS_TMP/install.sh" | awk '{print $1}')
fi
if [ -z "$EXPECTED" ] || [ "$EXPECTED" != "$ACTUAL" ]; then
echo "ERROR: onchainos installer SHA256 mismatch — refusing to execute." >&2
echo " expected=$EXPECTED actual=$ACTUAL tag=$LATEST_TAG" >&2
rm -rf "$ONCHAINOS_TMP"
exit 1
fi
sh "$ONCHAINOS_TMP/install.sh"
rm -rf "$ONCHAINOS_TMP"
set +e
fi
# 2. Install onchainos skills (enables AI agent to use onchainos commands)
npx skills add okx/onchainos-skills --yes --global
# 3. Install plugin-store skills (enables plugin discovery and management)
npx skills add okx/plugin-store --skill plugin-store --yes --global
# Install shared infrastructure (launcher + update checker, only once)
LAUNCHER="$HOME/.plugin-store/launcher.sh"
CHECKER="$HOME/.plugin-store/update-checker.py"
if [ ! -f "$LAUNCHER" ]; then
mkdir -p "$HOME/.plugin-store"
curl -fsSL "https://raw.githubusercontent.com/okx/plugin-store/main/scripts/launcher.sh" -o "$LAUNCHER" 2>/dev/null || true
chmod +x "$LAUNCHER"
fi
if [ ! -f "$CHECKER" ]; then
curl -fsSL "https://raw.githubusercontent.com/okx/plugin-store/main/scripts/update-checker.py" -o "$CHECKER" 2>/dev/null || true
fi
# Clean up old installation
rm -f "$HOME/.local/bin/aerodrome-amm-plugin" "$HOME/.local/bin/.aerodrome-amm-plugin-core" 2>/dev/null
# Download binary
OS=$(uname -s | tr A-Z a-z)
ARCH=$(uname -m)
EXT=""
case "${OS}_${ARCH}" in
darwin_arm64) TARGET="aarch64-apple-darwin" ;;
darwin_x86_64) TARGET="x86_64-apple-darwin" ;;
linux_x86_64) TARGET="x86_64-unknown-linux-musl" ;;
linux_i686) TARGET="i686-unknown-linux-musl" ;;
linux_aarch64) TARGET="aarch64-unknown-linux-musl" ;;
linux_armv7l) TARGET="armv7-unknown-linux-musleabihf" ;;
mingw*_x86_64|msys*_x86_64|cygwin*_x86_64) TARGET="x86_64-pc-windows-msvc"; EXT=".exe" ;;
mingw*_i686|msys*_i686|cygwin*_i686) TARGET="i686-pc-windows-msvc"; EXT=".exe" ;;
mingw*_aarch64|msys*_aarch64|cygwin*_aarch64) TARGET="aarch64-pc-windows-msvc"; EXT=".exe" ;;
esac
mkdir -p ~/.local/bin
# Download binary + checksums to a sandbox, verify SHA256 before installing.
# Fail-closed: any mismatch / missing checksum entry refuses the install.
# Matches the producer-side workflow at
# .github/workflows/plugin-publish.yml which uploads `checksums.txt`
# alongside the 9 platform binaries under each release tag.
BIN_TMP=$(mktemp -d)
TAG="plugins/aerodrome-amm-plugin@0.1.2"
# Robust asset download. Prefer `gh release download` — it resolves the
# asset via the GitHub API and follows the signed-redirect properly,
# which avoids edge cases observed where curl on
# `releases/download/<tag with slash>/<file>` 404s under some
# proxy / curl-version combinations. Falls back to raw curl if gh is
# not installed.
_pluginstore_dl() {
local fname="$1" dest="$2"
if command -v gh >/dev/null 2>&1; then
local stage; stage=$(mktemp -d)
if gh release download "$TAG" --repo okx/plugin-store \
--pattern "$fname" --dir "$stage" --clobber >/dev/null 2>&1 \
&& [ -f "$stage/$fname" ]; then
mv "$stage/$fname" "$dest" && rm -rf "$stage" && return 0
fi
rm -rf "$stage"
fi
curl -fsSL \
"https://github.com/okx/plugin-store/releases/download/$TAG/$fname" \
-o "$dest"
}
_pluginstore_dl "aerodrome-amm-plugin-${TARGET}${EXT}" "$BIN_TMP/aerodrome-amm-plugin${EXT}" || {
echo "ERROR: failed to download aerodrome-amm-plugin-${TARGET}${EXT}" >&2
rm -rf "$BIN_TMP"; exit 1; }
_pluginstore_dl "checksums.txt" "$BIN_TMP/checksums.txt" || {
echo "ERROR: failed to download checksums.txt for aerodrome-amm-plugin@0.1.2" >&2
rm -rf "$BIN_TMP"; exit 1; }
EXPECTED=$(awk -v b="aerodrome-amm-plugin-${TARGET}${EXT}" '$2 == b {print $1; exit}' "$BIN_TMP/checksums.txt")
if command -v sha256sum >/dev/null 2>&1; then
ACTUAL=$(sha256sum "$BIN_TMP/aerodrome-amm-plugin${EXT}" | awk '{print $1}')
else
ACTUAL=$(shasum -a 256 "$BIN_TMP/aerodrome-amm-plugin${EXT}" | awk '{print $1}')
fi
if [ -z "$EXPECTED" ] || [ "$EXPECTED" != "$ACTUAL" ]; then
echo "ERROR: aerodrome-amm-plugin SHA256 mismatch — refusing to install." >&2
echo " expected=$EXPECTED actual=$ACTUAL target=${TARGET}" >&2
rm -rf "$BIN_TMP"; exit 1
fi
mv "$BIN_TMP/aerodrome-amm-plugin${EXT}" ~/.local/bin/.aerodrome-amm-plugin-core${EXT}
chmod +x ~/.local/bin/.aerodrome-amm-plugin-core${EXT}
rm -rf "$BIN_TMP"
# Symlink CLI name to universal launcher
ln -sf "$LAUNCHER" ~/.local/bin/aerodrome-amm-plugin
# Register version
mkdir -p "$HOME/.plugin-store/managed"
echo "0.1.2" > "$HOME/.plugin-store/managed/aerodrome-amm-plugin"
aerodrome-slipstream insteadWhen a user signals they are new or just installed this plugin — e.g. "I just installed aerodrome-amm-plugin", "how do I get started", "what can I do" — do not wait for specific questions. Walk them through the Quickstart conversationally, one step at a time:
onchainos wallet addresses --chain 8453. If no address, direct them to onchainos wallet login. Do not proceed to write operations until a wallet is confirmed.onchainos wallet balance --chain 8453. WETH or USDC on Base is needed for swaps; both tokens needed for liquidity. Minimum recommended: $5 equivalent.aerodrome-amm-plugin pools --token-a WETH --token-b USDC to show available volatile and stable pools with reserves and price.aerodrome-amm-plugin quote --token-in WETH --token-out USDC --amount-in 0.01 so the user sees expected output from both pools before any on-chain action.aerodrome-amm-plugin swap --token-in WETH --token-out USDC --amount-in 0.01 without --confirm; show the preview JSON and explain minimum_out (slippage floor).--confirm. The binary auto-selects the best pool and handles token approvals.add-liquidity → positions → claim-fees → remove-liquidity from the Quickstart Steps 5–7.Do not dump all steps at once. Guide conversationally — confirm each step before moving on.
New to Aerodrome AMM? Follow these steps to go from zero to your first swap or LP position.
onchainos wallet login your@email.com
onchainos wallet addresses --chain 8453
onchainos wallet balance --chain 8453
You need WETH or USDC on Base (chain 8453). Minimum recommended: $5 equivalent for a first swap.
# Find volatile and stable WETH/USDC pools
aerodrome-amm-plugin pools --token-a WETH --token-b USDC
# Get a swap quote (auto-selects best pool)
aerodrome-amm-plugin quote --token-in WETH --token-out USDC --amount-in 0.01
The quote command shows both volatile and stable pool outputs, sorted by best return.
All write commands show a safe preview by default — no on-chain action until you add --confirm:
# Preview (safe — no tx sent):
aerodrome-amm-plugin swap --token-in WETH --token-out USDC --amount-in 0.01
# Execute (add --confirm):
aerodrome-amm-plugin swap --token-in WETH --token-out USDC --amount-in 0.01 --confirm
# Preview adding WETH/USDC liquidity to volatile pool (amounts auto-adjusted to pool ratio)
aerodrome-amm-plugin add-liquidity --token-a WETH --token-b USDC --amount-a 0.01 --amount-b 22.0
# Execute:
aerodrome-amm-plugin add-liquidity --token-a WETH --token-b USDC --amount-a 0.01 --amount-b 22.0 --confirm
# For stable pool (e.g. USDC/USDT):
aerodrome-amm-plugin add-liquidity --token-a USDC --token-b USDT --amount-a 10 --amount-b 10 --stable --confirm
The preview shows amount_a_used and amount_b_used — the actual amounts used may differ from desired to match the current pool ratio. Approvals for both tokens are handled automatically (idempotent: already-approved tokens are not re-approved).
After adding liquidity, verify your position and see the underlying token amounts:
aerodrome-amm-plugin positions --token-a WETH --token-b USDC
Example output:
{
"lp_balance": "0.000000004512",
"pool_share_pct": "0.000004%",
"underlying": { "WETH": "0.000096", "USDC": "0.22" },
"wallet": "0xee385...",
"tip": "Run `aerodrome-amm-plugin claim-fees` to collect accrued trading fees."
}
# Preview fees before claiming
aerodrome-amm-plugin claim-fees --token-a WETH --token-b USDC
# Claim fees on-chain
aerodrome-amm-plugin claim-fees --token-a WETH --token-b USDC --confirm
# Remove 100% of your position
aerodrome-amm-plugin remove-liquidity --token-a WETH --token-b USDC --percent 100 --confirm
# Or remove a specific LP amount
aerodrome-amm-plugin remove-liquidity --token-a WETH --token-b USDC --liquidity 0.001 --confirm
All price and reserve data is read directly from on-chain contracts via Base RPC — no third-party price oracles. Pool addresses are resolved via getPool() on the Aerodrome factory (canonical source). Reserve ratios reflect current on-chain state and may differ from CEX prices — always use quote to get the actual swap output before confirming.
Aerodrome AMM is the classic (xy=k / stableswap) liquidity layer of the Aerodrome protocol on Base. It complements Aerodrome Slipstream (concentrated liquidity) with two pool types:
All commands auto-detect the best pool type unless --stable is passed.
| Contract | Address |
|---|---|
| Pool Factory | 0x420DD381b31aEf6683db6B902084cB0FFECe40Da |
| Router | 0xcF77a3Ba9A5CA399B7c97c74d54e5b1Beb874E43 |
quote — Get swap quote (read-only)aerodrome-amm-plugin quote --token-in WETH --token-out USDC --amount-in 0.1
aerodrome-amm-plugin quote --token-in USDC --token-out USDT --amount-in 100 --stable
Returns quotes from each available pool (volatile and stable), sorted by best output.
| Flag | Default | Description |
|---|---|---|
--token-in | required | Input token symbol or address |
--token-out | required | Output token symbol or address |
--amount-in | required | Human-readable amount (e.g. "0.1") |
--stable | false | Only quote from stable pool |
swap — Swap tokens# Preview (no --confirm):
aerodrome-amm-plugin swap --token-in WETH --token-out USDC --amount-in 0.01
# Execute:
aerodrome-amm-plugin swap --token-in WETH --token-out USDC --amount-in 0.01 --confirm
# Force stable pool:
aerodrome-amm-plugin swap --token-in USDC --token-out USDT --amount-in 100 --stable --confirm
Auto-selects the pool giving the best output. Approves token_in to the Router if allowance is insufficient (idempotent check before approval). Approval is scoped to the exact swap amount.
| Flag | Default | Description |
|---|---|---|
--token-in | required | Input token |
--token-out | required | Output token |
--amount-in | required | Amount to swap |
--slippage | 0.5 | Slippage tolerance % |
--stable | false | Force stable pool |
--deadline-minutes | 20 | Tx deadline |
--confirm | false | Broadcast on-chain |
--dry-run | false | Build calldata only |
Preview output:
{
"preview": true,
"action": "swap",
"token_in": "WETH",
"token_out": "USDC",
"amount_in": "0.01",
"expected_out": "22.817474",
"minimum_out": "22.703386",
"slippage": "0.5%",
"pool_type": "volatile",
"router": "0xcF77a3Ba9A5CA399B7c97c74d54e5b1Beb874E43",
"chain": "Base (8453)"
}
pools — List pools for a token pairaerodrome-amm-plugin pools --token-a WETH --token-b USDC
aerodrome-amm-plugin pools --token-a USDC --token-b USDT
Returns reserve, price, and total LP supply for volatile and stable pools on the pair.
prices — Token price from AMM reservesaerodrome-amm-plugin prices --token WETH
aerodrome-amm-plugin prices --token AERO --quote WETH
| Flag | Default | Description |
|---|---|---|
--token | required | Token to price |
--quote | USDC | Quote currency |
positions — Show LP positionsaerodrome-amm-plugin positions --token-a WETH --token-b USDC
aerodrome-amm-plugin positions --token-a USDC --token-b USDT --stable
Shows LP token balance, pool share %, and estimated underlying token amounts for the active wallet.
| Flag | Default | Description |
|---|---|---|
--token-a | required | First token of the pair |
--token-b | required | Second token of the pair |
--stable | false | Check stable pool only (default: checks both) |
add-liquidity — Provide liquidity# Preview:
aerodrome-amm-plugin add-liquidity --token-a WETH --token-b USDC --amount-a 0.01 --amount-b 22.0
# Execute:
aerodrome-amm-plugin add-liquidity --token-a WETH --token-b USDC --amount-a 0.01 --amount-b 22.0 --confirm
# Stable pool:
aerodrome-amm-plugin add-liquidity --token-a USDC --token-b USDT --amount-a 100 --amount-b 100 --stable --confirm
Calls quoteAddLiquidity first to show actual amounts used (may be adjusted to match pool ratio). Approves both tokens to Router if needed (scoped to the deposit amount). Returns LP tokens to your wallet.
| Flag | Default | Description |
|---|---|---|
--token-a | required | First token |
--token-b | required | Second token |
--amount-a | required | Desired amount of token_a |
--amount-b | required | Desired amount of token_b |
--stable | false | Add to stable pool |
--slippage | 0.5 | Slippage tolerance % |
--deadline-minutes | 20 | Tx deadline |
--confirm | false | Broadcast on-chain |
--dry-run | false | Build calldata only |
remove-liquidity — Withdraw from pool# Remove 50% of your position:
aerodrome-amm-plugin remove-liquidity --token-a WETH --token-b USDC --percent 50 --confirm
# Remove exact LP amount:
aerodrome-amm-plugin remove-liquidity --token-a WETH --token-b USDC --liquidity 0.001 --confirm
# Remove 100% from stable pool:
aerodrome-amm-plugin remove-liquidity --token-a USDC --token-b USDT --percent 100 --stable --confirm
Approves LP tokens (pool contract) to the Router (scoped to the withdrawal amount), then calls removeLiquidity. Run positions first to see your LP balance.
| Flag | Default | Description |
|---|---|---|
--token-a | required | First token |
--token-b | required | Second token |
--liquidity | — | Exact LP amount to burn |
--percent | — | Percentage of LP balance (1–100) |
--stable | false | Remove from stable pool |
--slippage | 0.5 | Slippage tolerance % |
--confirm | false | Broadcast on-chain |
--dry-run | false | Build calldata only |
One of --liquidity or --percent is required.
claim-fees — Collect trading fees# Preview:
aerodrome-amm-plugin claim-fees --token-a WETH --token-b USDC
# Execute:
aerodrome-amm-plugin claim-fees --token-a WETH --token-b USDC --confirm
aerodrome-amm-plugin claim-fees --token-a USDC --token-b USDT --stable --confirm
Calls claimFees() on the pool. Accrued trading fees (proportional to your pool share and trading volume) are sent directly to your wallet. Fee amounts are determined on-chain at execution time.
| Flag | Default | Description |
|---|---|---|
--token-a | required | First token |
--token-b | required | Second token |
--stable | false | Claim from stable pool |
--confirm | false | Broadcast on-chain |
--dry-run | false | Build calldata only |
| Volatile | Stable | |
|---|---|---|
| AMM formula | xy=k | x^3y + xy^3 = k |
| Best for | Uncorrelated (WETH/USDC, WETH/AERO) | Pegged (USDC/USDT, EURC/USDC) |
| Price impact | Higher for large trades | Lower for correlated assets |
--stable flag | not needed | required |
The swap and quote commands automatically try both and pick the better output.
| Symbol | Address (Base) |
|---|---|
| WETH | 0x4200000000000000000000000000000000000006 |
| USDC | 0x833589fcd6edb6e08f4c7c32d4f71b54bda02913 |
| AERO | 0x940181a94a35a4569e4529a3cdfb74e38fd98631 |
| USDT | 0xfde4c96c8593536e31f229ea8f37b2ada2699bb2 |
| DAI | 0x50c5725949a6f0c72e6c4a641f24049a917db0cb |
| cbETH | 0x2ae3f1ec7f1f5012cfeab0185bfc7aa3cf0dec22 |
| cbBTC | 0xcbb7c0000ab88b473b1f5afd9ef808440eed33bf |
| EURC | 0x60a3e35cc302bfa44cb288bc5a4f316fdb1adb42 |
Any ERC-20 with an Aerodrome AMM pool can be used by passing its address directly.
quoteAddLiquidity preview for accurate add-liquidity estimatesclaimFees() for LP fee collectionTrade prediction markets on Polymarket - buy outcome tokens (YES/NO and categorical markets), check positions, list markets, manage orders, redeem winning tokens, and deposit funds on Polygon. Trigger phrases: buy polymarket shares, sell polymarket position, check my polymarket positions, list polymarket markets, get polymarket market, cancel polymarket order, redeem polymarket tokens, polymarket yes token, polymarket no token, prediction market trade, polymarket price, get started with polymarket, just installed polymarket, how do I use polymarket, set up polymarket, polymarket quickstart, new to polymarket, polymarket setup, help me trade on polymarket, place a bet on, buy prediction market, bet on, trade on prediction markets, prediction trading, place a prediction market bet, i want to bet on, deposit, top up, fund, transfer in, add funds, fund polymarket, top up polymarket, add funds to polymarket, recharge polymarket, deposit usdc, deposit eth, polymarket deposit, BTC 5-minute, ETH 5-minute, 5-minute ma
Hyperliquid DEX — trade perps & spot, deposit from Arbitrum, withdraw to Arbitrum, transfer between perp and spot accounts, manage gas on HyperEVM.
DigiFT RWA platform CLI — query products, prices, fees, calendar, whitelist, orders; build subscribe/redeem/approve transactions (outputs TxBody, does NOT sign)
Compound V2 (cToken) money market on Ethereum mainnet - exit tool for legacy positions (redeem, repay, claim COMP). Both supply AND borrow are governance-paused on all 6 markets. Use compound-v3-plugin for active flows.
Supply, borrow and earn yield on Euler v2 - a modular lending protocol with isolated-risk EVK (Euler Vault Kit) vaults. Trigger phrases: supply to euler, deposit to euler vault, borrow from euler, repay euler loan, euler health factor, my euler positions, euler vault apy, claim euler rewards, list euler vaults, evk vault.
Meme Trench Scanner v1.0 — Agentic Wallet TEE signing automated trading bot. onchainos CLI driven (no API Key needed), full coverage of 11 Solana Launchpads, 5m/15m B/S precision signal detection, price position filter (TOP_ZONE 85%), TP2 100% exit (no moon bag), TraderSoul AI observation system, FAST_DUMP 10-second crash detection, 3-check position protection. Triggers when the user mentions meme trench scanner, meme scanner, chain scanner, memepump scan, Tranches scan, pump.fun chain scan, safety filter chain scan, dev rug detection, bundler filter, on-chain scanning strategy, 扫链, Meme 扫链, or wants to automatically scan and trade pump.fun migrated tokens based on memepump.