aoss-nextgen-provisioning

name	aoss-nextgen-provisioning
description	Use when provisioning or deprovisioning OpenSearch Serverless collections, creating collection groups, setting up AOSS NextGen, or tearing down AOSS resources

OpenSearch Serverless NextGen Provisioning & Deprovisioning

Overview

Guided wizard for provisioning and deprovisioning Amazon OpenSearch Serverless (AOSS) NextGen collections. Handles the full orchestration: security policies, collection groups, and collections — in the correct dependency order.

When to Use

• Customer wants to create an OpenSearch Serverless collection
• Customer wants to set up AOSS NextGen
• Customer wants to delete/deprovision AOSS resources
• Customer mentions "collection group", "opensearch serverless", "AOSS"

Critical Rules (MUST follow — violations are errors)

1. --generation NEXTGEN is REQUIRED — Every create-collection-group command MUST include --generation NEXTGEN. This flag is mandatory for NextGen collection groups. Never omit it. Example: aws opensearchserverless create-collection-group --name <name>-group --standby-replicas ENABLED --generation NEXTGEN --region <region>
2. Create encryption policy BEFORE the collection — Resources MUST be created in this exact order: encryption policy → network policy → collection group → collection. Never create a collection or collection group before its encryption and network policies exist. When the user asks to set up a collection, show ALL commands in the correct order.
3. Valid OCU values only — OCU capacity values MUST be one of: 1, 2, 4, 8, 16, or any multiple of 16 (32, 48, 64, etc.). Values like 3, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 17, 18, etc. are INVALID. If a user requests an invalid OCU value (e.g., "10 OCUs" or "12 OCUs"), you MUST immediately reject it — say "10 is not a valid OCU value. Valid values are: 1, 2, 4, 8, 16, 32, 48, 64..." and ask the user to choose a valid value. Do NOT proceed with invalid values.
4. Only SEARCH and VECTORSEARCH types — The only valid collection types are SEARCH and VECTORSEARCH. TIMESERIES is NOT a valid collection type for AOSS NextGen. If a user asks for TIMESERIES, inform them it is not supported and offer SEARCH or VECTORSEARCH.
5. Confirm before deleting — Before any deprovision/delete operation, ALWAYS list all resources that will be deleted and require explicit user confirmation (typing the group/collection name) before proceeding.
6. standbyReplicas: ENABLED is mandatory — Never allow DISABLED for standby replicas in NextGen collection groups.

Key Constraints

• "standbyReplicas": "ENABLED" is MANDATORY for all NextGen collection groups (never allow DISABLED)
• "generation": "NEXTGEN" is REQUIRED for NextGen collection groups.
• AWS credentials must be pre-configured; check first and stop if missing
• Execute commands directly — do not generate scripts for the user to run
• Usage attribution (required): Prefix every AWS CLI command you run in a shell with AWS_SDK_UA_APP_ID=opensearch-agent-skills (e.g. AWS_SDK_UA_APP_ID=opensearch-agent-skills aws opensearchserverless ...), regardless of service or subcommand. Scope it per-command — do not export it globally. This tags the call's User-Agent header so cloud requests from this skill are attributable.
• Collections must be in ACTIVE status before they can be deleted. NextGen collections typically take ~30 seconds; standalone collections can take 3-5 minutes.
• OCU capacity limits must be: 1, 2, 4, 8, 16, or any multiple of 16

Quick Reference

Action	Flow	What it creates
New NextGen collection (defaults)	Simple	enc policy + net policy + group + collection
New NextGen collection (customized)	Advanced	enc policy + net policy + group (with limits) + collection
New standalone collection (v1)	Standalone	enc policy + net policy + collection
Add collection to existing group	Add to Group	collection (+ policies if needed)
Delete resources	Deprovision	Removes collections → group → policies

Naming Convention (Auto-Generated)

Resource	Name Pattern
Collection	<user-provided-name>
Collection group	<name>-group
Encryption policy	<name>-enc-policy
Network policy	<name>-net-policy
Data access policy	<name>-access-policy

Companion Files

This skill is split across multiple files to stay under 500 lines. Read companion files on demand:

• If user selects Flow 2 (Advanced) or Flow 4 (Add to Existing Group): Read ADVANCED.md in this directory.
• If user selects Flow 5 (Deprovision): Read DEPROVISION.md in this directory.
• On any command failure: Read ERRORS.md in this directory for error handling guidance.

---

Entry Point

Step 1: Credential Check

Run:

aws sts get-caller-identity

If this fails, tell the user: "AWS credentials are missing or expired. Please configure credentials (e.g., aws configure or set environment variables) and try again." Then STOP.

Step 2: Mode Selection

Ask the user:

What would you like to do?

1. Provision (Simple) — New NextGen collection group + collection with defaults
2. Provision (Advanced) — Preset-based setup with full parameter control
3. Provision standalone collection — Collection without a collection group (classic)
4. Add collection to existing group — Create a collection in an existing collection group
5. Deprovision — Tear down collection(s) and/or collection group

Proceed to the corresponding flow section below (or read companion file as noted above).

---

Flow 1: Simple Provisioning

Inputs

Collect from the user (one at a time):

1. Collection name — 3-32 chars, lowercase letters, numbers, hyphens. Must start with a letter. Pattern: [a-z][a-z0-9-]+
2. Collection type — SEARCH or VECTORSEARCH
3. Region — AWS region (e.g., us-east-1, us-east-2, us-west-2)

Execution

Run these commands in order. Stop and report if any command fails.

1. Create encryption policy:

aws opensearchserverless create-security-policy --cli-input-json '{
  "type": "encryption",
  "name": "<name>-enc-policy",
  "policy": "{\"Rules\":[{\"ResourceType\":\"collection\",\"Resource\":[\"collection/<name>\"]}],\"AWSOwnedKey\":true}"
}' --region <region>

2. Create network policy (public access):

aws opensearchserverless create-security-policy --cli-input-json '{
  "type": "network",
  "name": "<name>-net-policy",
  "policy": "[{\"Description\":\"Public access for <name>\",\"Rules\":[{\"ResourceType\":\"dashboard\",\"Resource\":[\"collection/<name>\"]},{\"ResourceType\":\"collection\",\"Resource\":[\"collection/<name>\"]}],\"AllowFromPublic\":true}]"
}' --region <region>

3. Create collection group (NextGen):

aws opensearchserverless create-collection-group \
  --name <name>-group \
  --standby-replicas ENABLED \
  --generation NEXTGEN \
  --region <region>

4. Create collection:

aws opensearchserverless create-collection --cli-input-json '{
  "name": "<name>",
  "type": "<TYPE>",
  "collectionGroupName": "<name>-group"
}' --region <region>

5. Optional — Data access policy:

Ask: "Would you like to set up a data access policy now? This grants an IAM principal access to the collection. You can also do this later."

If yes, collect the IAM principal ARN (role or user ARN), then run:

aws opensearchserverless create-access-policy --cli-input-json '{
  "type": "data",
  "name": "<name>-access-policy",
  "policy": "[{\"Rules\":[{\"Resource\":[\"collection/<name>\"],\"Permission\":[\"aoss:*\"],\"ResourceType\":\"collection\"},{\"Resource\":[\"index/<name>/*\"],\"Permission\":[\"aoss:*\"],\"ResourceType\":\"index\"},{\"Resource\":[\"model/*/*\"],\"Permission\":[\"aoss:*\"],\"ResourceType\":\"model\"},{\"Resource\":[\"agent/*/*\"],\"Permission\":[\"aoss:*\"],\"ResourceType\":\"agent\"}],\"Principal\":[\"<principal-arn>\"]}]"
}' --region <region>

Important: The model and agent resource types are required for semantic enrichment (CreateIndex with semantic_enrichment) and for deploying ML models or agents on the collection. The model/*/* wildcard pattern is needed because semantic enrichment creates ML connectors at the account level, not scoped to a single collection name. Always include both model and agent rules.

Success Output

After all commands succeed, report:

• Collection group name and ID
• Collection name, ID, and ARN (from create-collection response)
• Region
• Remind user: "Your collection will be ACTIVE in 1-2 minutes. You can check status with: aws opensearchserverless batch-get-collection --ids <id> --region <region>"

---

Flow 3: Standalone Collection (Classic)

For customers who want a collection without a collection group (v1-style, no NextGen features).

Inputs

Collect from the user:

1. Collection name — 3-32 chars, lowercase, alphanumeric + hyphens, starts with letter
2. Collection type — SEARCH or VECTORSEARCH
3. Region — AWS region

Execution

1. Create encryption policy:

aws opensearchserverless create-security-policy --cli-input-json '{
  "type": "encryption",
  "name": "<name>-enc-policy",
  "policy": "{\"Rules\":[{\"ResourceType\":\"collection\",\"Resource\":[\"collection/<name>\"]}],\"AWSOwnedKey\":true}"
}' --region <region>

2. Create network policy (public access):

aws opensearchserverless create-security-policy --cli-input-json '{
  "type": "network",
  "name": "<name>-net-policy",
  "policy": "[{\"Description\":\"Public access for <name>\",\"Rules\":[{\"ResourceType\":\"dashboard\",\"Resource\":[\"collection/<name>\"]},{\"ResourceType\":\"collection\",\"Resource\":[\"collection/<name>\"]}],\"AllowFromPublic\":true}]"
}' --region <region>

3. Create collection (no collection group):

aws opensearchserverless create-collection --cli-input-json '{
  "name": "<name>",
  "type": "<TYPE>"
}' --region <region>

4. Optional — Data access policy:

Same as Flow 1.

Success Output

Report collection name, ID, ARN, region. Remind about status check command.