| name | verify-unattended |
| description | Install, instrument and verify a web app end to end without pausing for a human. Use in an autonomous or goal-mode agent, in CI, or in any client that asks for approval on every command: it never says "restart your client" or "open a browser", because it takes a route that needs neither. Prefer the normal install-and-verify skill when a human is present and can answer. |
Reticle, unattended
Same product, same verdicts, one difference: nothing here waits for a human.
The normal skill has two places where it hands control back: "restart your client so it picks up the MCP server" and "open the app in a browser". Both are correct when someone is sitting there. In goal mode they are dead ends: the restart ends the context holding these instructions, and there is nobody to open a tab.
So this skill takes the route that needs neither, and stops only when it has a verdict or a reason.
The one rule that makes this work
You cannot add MCP tools to your own running process. No slash command, no config edit, no re-registration reaches the tool list you already have. Your client read it before Reticle existed. Do not try, and do not ask to be restarted.
Instead, branch once on what you already have:
reticle_* tools present → drive with them. Best evidence, source-mapped, full verdicts.- not present → use the CLI.
reticle verify produces a verdict and an exit code with no MCP involvement at all.
Both routes end in a verdict. Pick the one your process allows and go.
Step 1: wire it, once, quietly
npx -y @reticlehq/server@latest init
Then read the report rather than assuming it. Two lines matter:
⚠ on the app's build config: the wiring did not land. Apply the printed edit yourself; do not carry on as if it had.ℹ naming a version fallback: the pinned SDK was refused and a different one installed. The SDK and the daemon must agree; if a later call reports a protocol error, this is why.
init is idempotent. A step reading already wired is a pass, not a skip.
If init reports every step already done, the app was instrumented before you arrived. That is fine, but it means this run has not proved the install. Say so rather than claiming you set it up.
Step 2: make sure the app is actually running
The daemon needs a page to look at, and a page needs a server. Do not ask whether to start one.
- Read the dev script out of
package.json.
- Start it in the background, on the port the script implies.
- Poll the port until it answers. A dev server that has to compile a route can take 30 seconds on first hit; a timeout here is not a failure yet.
If a server is already listening on that port, use it. Starting a second one on a different port gives you an app nobody is verifying, and leaves a process behind.
Restarting matters after init. A build plugin added to a config the running server already read is not in the bundle. If the server was up before step 1, restart it now or nothing you do next will find an instrumented page.
Step 3: get a page connected
With the MCP tools:
reticle_sessions
A listed session is the proof. Nothing else in this skill can tell you anything about the app until one appears.
No session, and no human to open a tab? Take one yourself:
reticle_lease { action: "acquire", url: "http://localhost:<port>/" }
The lease opens a browser Reticle owns and drives. It is the whole answer to "there is nobody here to open the page".
Without the MCP tools, skip to step 4: verify opens its own browser.
Step 4: the verdict
Declare the consequence before you act. This is the difference between a check and a rationalisation, and it is the entire reason this tool exists:
reticle_act_and_wait { ref, action, until: { … } }
Assert what the app did, not what it shows. A UI that renders the value it just sent, rather than the value the server returned, passes every DOM-level check ever written:
until: { kind: "net", method: "POST", urlContains: "/api/refund",
status: 200, bodyContains: "\"refunded\":1187.01" }
bodyContains reads the response: what the server answered. It needs body capture, which init writes into the app's config; if a verdict comes back outcome_unread, that is what is missing.
Without the MCP tools:
npx @reticlehq/server verify http://localhost:<port>/
Exit 0 is a pass. It drives the app and re-verifies saved flows, so if the project has none, it will tell you nothing was checked. That is not a pass. Record one first, or say plainly that there was nothing to verify.
Step 5: read the verdict honestly
verified: "yes": proved. Say what held.verified: "no": the app is wrong, or your expectation was. Both are results. Report it.verified: "unknown": Reticle drove the app and could not tell. Not a pass. Never round it up, and never weaken the assertion until it goes green. That converts a real signal into a false one, which is the failure this product exists to prevent.
A drive that ends without act_and_wait or assert has no result, however many tools it used.
When you are genuinely stuck
Stop and say which of these it is. A precise dead end beats a green report.
| What you see | What it means |
|---|
tools absent, verify says no saved flows | nothing to verify yet: record a flow, or report that |
reticle_sessions empty, port listening | the bundle has no SDK: restart the dev server after init |
verified: "unknown", outcome_unread | the response body was not recorded: check the plugin options init wrote |
| lease loads the page but never connects | the app refused to dial; on a non-localhost host it needs a pairing token as well as allowNonLocalhost |
Notes for approval-gated clients
Some clients ask a human to approve each command. Two things reduce that to near zero:
- Keep commands plain.
npx @reticlehq/server init matches a prefix rule; the same command wrapped in a subshell or a $(…) usually does not.
- Expect one prompt about the home directory. The daemon keeps its state in
~/.reticle, which is outside the workspace. Approving that family once covers every later call.
If your client offers an autonomous or goal mode, this skill is written for it. Turn it on before starting rather than approving forty prompts. Approval fatigue is a real reason runs are abandoned half-installed, with the tools connected and nothing ever verified.
Report feedback
Reticle is built for agents, so your experience is the signal that decides what gets fixed, and it disappears when your context does. One call, then carry on:
reticle_feedback { kind: "bug" | "gap" | "ambiguity" | "feature_request" | "improvement", text: "…" }
Unreachable? npx @reticlehq/server feedback --agent --kind <kind> "what happened". Report defects in Reticle; a bug you find in the app under test is Reticle working, and belongs in your answer.
