install-check

name

install-check

description

Check, fix, or extend requirements/install.sh and its docker/Dockerfile coverage when adding a new embodied model or environment in RLinf, so the install logic reuses common utilities, keeps system deps in sys_deps.sh, pins/forks git deps, avoids ad-hoc pyproject/core-dep hacks, and every new model/env gets a matching Dockerfile build stage. Use when writing or cleaning up an install_<model>_model / install_<env>_env function, fixing a flaky or non-portable install path, or reviewing an install.sh / Dockerfile diff for convention compliance.

Install check: install.sh + Dockerfile conventions for a new model/env

requirements/install.sh installs every embodied model + env combo, and docker/Dockerfile builds an image per target. New contributions tend to copy-paste an existing block and hack it until it works on one machine — re-cloning repos by hand, apt-get-ing a package, pinning ray, sed-ing pyproject.toml, and forgetting the Dockerfile entirely. This skill is the convention checklist plus a linter that flags those anti-patterns.

Sibling skill: add-install-docker-ci-e2e wires up a new model/env (register, Dockerfile stage, CI jobs). This skill checks the quality of the install function and that the Dockerfile keeps up.

All paths below are relative to the repo root.

Run the check (start here)

The harness is check.sh. Run it before and after editing requirements/install.sh or docker/Dockerfile:

bash .cursor/skills/install-check/check.sh

It scans the install script for each convention, then verifies every model in SUPPORTED_MODELS and env in SUPPORTED_ENVS has a matching --model / --env install invocation in docker/Dockerfile. It prints line numbers + fix hints and exits non-zero if anything is flagged. Paths can be passed explicitly:

bash .cursor/skills/install-check/check.sh requirements/install.sh docker/Dockerfile

Heuristics over-report — every hit is a line to review, not an automatic bug. Some are legitimate exceptions (see Gotchas). The goal when fixing is: each flagged item is either resolved or consciously kept with a one-line reason.

The conventions

1. Reuse common utilities — don't rebuild them. Clone with clone_or_reuse_repo, install flash-attn with install_flash_attn, apex with install_apex, base deps with install_common_embodied_deps. If a utility almost fits, enhance the utility, don't fork a near-duplicate.
2. A model has one install_<model>_model() that cases on $ENV_NAME and calls the matching install_<env>_env(). An env with no model is installed through install_env_only (add a branch there).
3. System packages go in requirements/embodied/sys_deps.sh, never apt-get/dnf/yum/pacman inside install.sh. sys_deps.sh covers apt/dnf/yum/pacman — add the package to every install_deps_<mgr> function so all distros are handled.
4. Pin every git dependency to a commit/tag/branch (@<rev> or -b <branch>), or fork it into github.com/RLinf/<repo>. No floating main.
5. Don't touch RLinf's own pyproject.toml from install.sh except through apply_torch_override. If an override pin conflicts with a dependency you're installing, cd/pushd into that dependency's checkout and install from there (editing the cloned repo's pyproject after cd is fine).
6. Don't override core deps (ray, and avoid loose torch pins). Before adding a uv pip install x==y, check whether the common embodied/agentic deps or pyproject.toml already provide it. Fewer overrides = fewer cross-env breakages.
7. Every new model/env install needs a matching docker/Dockerfile change. Adding a model to SUPPORTED_MODELS or env to SUPPORTED_ENVS (and its install_* function) is not complete until docker/Dockerfile has a build stage that installs it. Add , a stage, the line, and the default-venv line. (See for the full stage + CI pattern.)

Common utilities to reuse (in install.sh)

Need	Use	Don't
Clone a repo	clone_or_reuse_repo ENV_VAR DEFAULT_DIR URL [git args…] (reuse via *_PATH, mirror prefix, corruption re-clone)	raw git clone
flash-attn	install_flash_attn (platform-aware, prebuilt wheels, source fallback)	hand-built wheel URLs
apex	install_apex	building apex inline
venv + base sync	create_and_sync_venv then install_common_embodied_deps	re-implementing uv venv / uv sync
torch version change	--torch flag → apply_torch_override	sed on pyproject.toml
system libs / EGL / Vulkan	requirements/embodied/sys_deps.sh (+ per-platform render config)	apt-get, writing ICD json inline
CUDA / ROCm detection	detect_cuda_major_minor, detect_rocm_version	re-parsing nvcc/rocminfo
mirror-aware git	GITHUB_PREFIX prefix + setup_mirror	hardcoding mirror URLs

Workflow

Adding an env to a model: add a branch to the model's case "$ENV_NAME": create_and_sync_venv → install_common_embodied_deps → install_<env>_env (+ install_flash_attn if the model needs it). Register the env name in SUPPORTED_ENVS. Then add the Dockerfile stage (Req 7).

Adding a model: add install_<model>_model() (case on $ENV_NAME), a case "$MODEL" branch in main(), and the name in SUPPORTED_MODELS. Put model-specific pip pins in requirements/embodied/models/<model>.txt rather than inline when there are more than a couple. Then add the Dockerfile stage.

Env with no model: add a branch in install_env_only.

After editing, run the check and resolve/annotate every new hit, then syntax-check both files:

bash -n requirements/install.sh && echo "syntax OK"

Gotchas (real findings from the current tree)

• apt-get install git-lfs inside install_gr00t_n1d6_model (around line 1248) is exactly the Req-3 violation: git-lfs should be added to sys_deps.sh across all four package managers, not apt-get-ed inline (which breaks on non-Debian hosts).
• torch== pins: behavior is fine, genesis is a real candidate. install_behavior_env pins torch==2.5.1 but wraps it in pushd ~ … popd — installing from ~ so RLinf's pyproject overrides don't apply (sanctioned). install_genesis_env pins torch==2.8.0 inline with no cd — review it. Same Req-6 flag, opposite verdicts — read the context.
• A clone can be "pinned later." NVIDIA/Isaac-GR00T is cloned unpinned but the function then does git checkout 7d5a455… — effectively pinned. The linter still flags the clone line; acceptable. Prefer pinning at the clone_or_reuse_repo call when possible.
• The franka catkin workspace uses raw git clone for three ROS repos building one workspace — a genuine multi-repo build, not a single dep. Keep it.
• Editing a cloned repo's pyproject.toml (gr00t's peft pin) is fine because it happens after cd "$gr00t_path". The linter can't tell whose pyproject it is — confirm it's not RLinf's.
• Docker coverage gaps are real. The check currently flags models gr00t_n1d6, dreamzero, qwen3_vl and envs genesis, habitat, xsquare_turtle2, franka-dexhand as having no Dockerfile stage. New additions like these should get one. A handful of utility/real-robot targets (dummy, d4rl, gim_arm, dosw1) intentionally have no image — keep them out consciously, don't let the gap pass silently.

Gotchas (about the harness)

• It's grep/awk static analysis: it cannot see runtime cd, so it can't always tell a sanctioned cloned-repo edit from an RLinf-pyproject edit. Read the surrounding function.
• Docker matching is by --model <name> / --env <name> with a name boundary, so --env libero won't match --env liberopro and --env franka; (trailing ;) still matches. If you wire a target in via a non-standard invocation, the check may report a false gap.
• The ANSI bold headers come out as escape codes when piped; strip with sed 's/\x1b\[[0-9;]*m//g' if you need plain text.

When to stop and ask

Ask the user (Req 9) when: a needed dep genuinely conflicts with a core pin and neither fork-vs-pin nor a cd workaround is obviously right; a model's set of supported envs is unclear; or whether a new target should ship a Docker image at all. Don't silently pick — a wrong pin or a missing image breaks installs/CI for every other env.