Use this skill to configure R8 correctly for a Jetpack Compose application — full mode by default, `proguard-android-optimize.txt`, resource shrinking on, and minimal keep rules because Compose ships consumer ProGuard rules. Covers AGP 8.0+ R8 full mode default, R8's Compose-aware optimizations (lambda grouping, `sourceInformation()` stripping, composable arg constant-folding, `ComposerImpl` devirtualization), legitimate keep needs (`@Serializable`, Hilt entry points, reflective `Saver`s), and the AGP 8.x missing-rule reporter / R8 retrace. Cited gain is roughly 75 percent startup and 60 percent frame-render improvement debug-to-release. Use when setting up a new Compose app, when a PR adds an over-broad keep like `-keep class androidx.compose.** { *; }`, when a release build crashes after enabling minification, when APK size needs reduction, or when first enabling minification.
Use this skill to configure R8 correctly for a Jetpack Compose application — full mode by default, `proguard-android-optimize.txt`, resource shrinking on, and minimal keep rules because Compose ships consumer ProGuard rules. Covers AGP 8.0+ R8 full mode default, R8's Compose-aware optimizations (lambda grouping, `sourceInformation()` stripping, composable arg constant-folding, `ComposerImpl` devirtualization), legitimate keep needs (`@Serializable`, Hilt entry points, reflective `Saver`s), and the AGP 8.x missing-rule reporter / R8 retrace. Cited gain is roughly 75 percent startup and 60 percent frame-render improvement debug-to-release. Use when setting up a new Compose app, when a PR adds an over-broad keep like `-keep class androidx.compose.** { *; }`, when a release build crashes after enabling minification, when APK size needs reduction, or when first enabling minification.
license
Apache-2.0. See LICENSE for complete terms.
metadata
{"author":"Jaewoong Eum (skydoves)","keywords":["jetpack-compose","performance","r8","proguard","keep-rules","apk-size","minification","shrinking","obfuscation","release-build"]}
R8 is the only supported shrinker — ProGuard is deprecated. Compose ships consumer ProGuard rules, so most apps need no Compose-specific keep rules. The big modern wins come from R8 full mode (default since AGP 8.0): lambda grouping, sourceInformation() stripping, constant-folding of composable args, and ComposerImpl devirtualization. This skill teaches Claude to set R8 up minimally and refuse over-broad keeps that defeat those wins.
When to use this skill
Setting up a new Compose app's release variant for the first time.
A PR adds -keep class androidx.compose.** { *; } or any other Compose-wide keep — push back and apply this skill.
A release build crashes after enabling minification — the cause is almost always a missing keep on a reflective consumer, not on Compose itself.
APK size review surfaces a large classes.dex and the developer wants to know why.
The first time isMinifyEnabled = true is being flipped on, before any release benchmark is run.
Cross-link from ../../measurement/testing-compose-in-release-mode/SKILL.md whenever release measurement is being set up.
When NOT to use this skill
The app is not yet ready to ship a release variant — wait until perf and crash budgets are in scope.
The developer is debugging a code-level bug (logic error, race, wrong state). R8 issues manifest as ClassNotFoundException, NoSuchMethodError, or empty reflection results — not behavioral bugs.
The release variant has been measured and is fine — do not pre-emptively add keep rules.
The perf concern is recomposition, layout phase, or stability — see the relevant stability/ or recomposition/ skills.
Prerequisites
AGP 8.0+ for R8 full mode default. If on older AGP, full mode must be explicitly enabled in gradle.properties with android.enableR8.fullMode=true.
A buildable release variant (debug-signed is fine while iterating — see ../../measurement/testing-compose-in-release-mode/SKILL.md for measurement signing).
Kotlin 2.0+ with the org.jetbrains.kotlin.plugin.compose plugin so Compose's bundled consumer rules are wired correctly through dependency resolution.
Familiarity with the difference between proguard-android.txt (no R8 optimizations) and proguard-android-optimize.txt (R8 optimizations on).
What R8 actually does for Compose (since AGP 8.0)
Surface these to the developer when they ask "why bother" or push back against minification:
Lambda grouping. R8 merges many of Compose's generated lambda classes, reducing dex size and method count.
sourceInformation() stripping. Each composable emits a string of source-position metadata. R8 removes it from release builds — smaller APK and less work per recomposition.
Composable arg constant-folding. Constants that would have been wrapped by Live Literals in debug are now folded back into if (changed and 1 == 0) style checks the recomposer can short-circuit.
ComposerImpl devirtualization. R8 devirtualizes hot calls into Compose's runtime, which is a major contributor to the cited frame-render improvement.
Resource shrinking. Paired with isShrinkResources = true, R8 strips unreachable drawables, strings, and layout XML.
Cited measurement: roughly 75 percent startup gain and 60 percent frame-render gain debug to release. Source: Ben Trengrove, "Why should you always test Compose performance in release" (Android Developers Medium).
Workflow
1. Configure the release buildType. This is the entire happy-path config — no Compose-specific keeps needed:
2. Verify the default file name. The single most common mistake is using proguard-android.txt instead of proguard-android-optimize.txt. Only the -optimize variant enables R8's optimization passes.
3. Trust Compose's bundled consumer rules. DO NOT add Compose-wide keeps. Each Compose artifact (androidx.compose.runtime, androidx.compose.ui, androidx.compose.foundation, androidx.compose.material3, etc.) ships a consumer-rules.pro that R8 picks up automatically. The developer's proguard-rules.pro should contain no lines starting with -keep class androidx.compose..
4. Identify legitimate keep needs from the project. R8 problems are usually outside Compose:
@Serializable data classes consumed by kotlinx.serialization (the kotlinx-serialization Gradle plugin emits the right rules — verify, do not duplicate).
Hilt / Dagger entry points and generated DI code (the Hilt plugin emits these — verify).
Custom rememberSaveableSaver objects only when accessed reflectively from outside the module.
Any Class.forName(...) consumer, JNI binding, or service loader.
Public API surfaces of library modules consumed by other apps.
5. Run the AGP 8.x missing-rule reporter to find under-keeps. Do not add speculative keeps. After a build that fails at runtime in release, AGP writes a report at app/build/outputs/mapping/release/missing_rules.txt listing the exact -keep directives R8 inferred from runtime failures. Add only those, narrowed to the specific class/method.
6. Use R8 retrace to map crash stacks back to source. When a release crash arrives, run the modern R8 retrace shipped with the Android command-line tools:
# Modern R8 retrace (cmdline-tools 7.0+):$ANDROID_HOME/cmdline-tools/latest/bin/retrace \
app/build/outputs/mapping/release/mapping.txt < crash.txt
Or use the Gradle convenience target wired into AGP:
./gradlew :app:retraceR8DebuggingArtifact
(The legacy ProGuard retrace.sh install path under $ANDROID_HOME/tools/ was removed when SDK Tools 26 was sunset; do not look for it.) Always retrace before diagnosing a release crash — the stack frames are otherwise meaningless.
7. Verify with an APK analysis. After enabling minification:
./gradlew :app:assembleRelease
# Then in Android Studio: Build → Analyze APK → app-release.apk# Compare classes.dex method count and resources.arsc size against the same build with isMinifyEnabled = false.
A correctly configured Compose app with no over-broad keeps typically halves the method count vs the un-minified release.
8. Re-run Macrobenchmark to capture the perf gain. Cross-link ../../measurement/testing-compose-in-release-mode/SKILL.md. The expected delta vs CompilationMode.None against a debug variant is in the 75 percent / 60 percent range cited above.
Patterns
Pattern: Over-broad Compose keep
# WRONG
-keep class androidx.compose.** { *; }
# WRONG because: Compose's own consumer rules are tighter and correct; a wildcard keep blocks lambda grouping, prevents sourceInformation stripping, kills composable-arg constant folding, defeats ComposerImpl devirtualization, and bloats classes.dex. The cited 75/60 gains evaporate.
# RIGHT — let Compose's consumer rules handle it.
# (no Compose-specific lines in proguard-rules.pro by default)
Pattern: Wrong default ProGuard file
// WRONG
buildTypes.release {
isMinifyEnabled = true
proguardFiles(
getDefaultProguardFile("proguard-android.txt"),
"proguard-rules.pro",
)
}
// WRONG because: proguard-android.txt explicitly skips R8's optimization passes. Lambda grouping, devirtualization, constant folding, sourceInformation stripping all do not run. The release variant builds and installs but performs like a poorly minified app.
# WRONG
-keep class kotlin.Metadata { *; }
# WRONG because: blanket-keeping kotlin.Metadata blocks R8 from shrinking metadata for unreachable Kotlin classes; identify the actual reflective consumer (kotlinx.serialization, Moshi, Gson, Hilt) and add a narrow rule for that consumer instead.
# RIGHT — narrow to the reflective consumer
# Example: kotlinx.serialization needs Companion access on KSerializer implementations.
-keepclassmembers class * implements kotlinx.serialization.KSerializer {
public static **$Companion Companion;
}
Pattern: -dontobfuscate for "easier debugging"
# WRONG
-dontobfuscate
-dontoptimize
# WRONG because: turning off obfuscation and optimization on the release variant removes most of R8's benefit; the variant being measured is no longer the variant that ships. If readable stacks are needed, ship with R8 on and use retrace + the mapping.txt to deobfuscate.
# RIGHT — leave R8 on, keep mapping.txt for retrace.
# (no -dontobfuscate / -dontoptimize lines)
# Upload mapping.txt to your crash reporter (Crashlytics, Sentry, etc.) so stacks
# are deobfuscated automatically; or run R8 retrace manually:
# $ANDROID_HOME/cmdline-tools/latest/bin/retrace mapping.txt < crash.txt
# (or: ./gradlew :app:retraceR8DebuggingArtifact)
Pattern: @Serializable keep when the kotlinx-serialization plugin is missing
# RIGHT — when using kotlinx.serialization with reflection-based polymorphism
-keepclassmembers class * implements kotlinx.serialization.KSerializer {
public static **$Companion Companion;
}
-keepclasseswithmembers class * {
@kotlinx.serialization.Serializable <init>(...);
}
# But PREFERRED: apply the kotlinx-serialization Gradle plugin so these rules are emitted automatically.
Pattern: Reflective rememberSaveable Saver
# WRONG — defensive blanket keep
-keep class **.Saver { *; }
# WRONG because: most Saver implementations are reachable from non-reflective code and are kept automatically; a blanket keep prevents inlining and elimination.
# RIGHT — only when the Saver is loaded by name reflectively
-keepclassmembers class com.example.feature.MyTypeSaver {
public static *** INSTANCE;
}
Mandatory rules
MUST use proguard-android-optimize.txt, not proguard-android.txt. The non-optimize variant disables R8's optimization passes.
MUST keep isMinifyEnabled = true AND isShrinkResources = true for release.
MUST NOT add Compose-wide keep rules (-keep class androidx.compose.** { *; }, -keep class * extends androidx.compose.runtime.Composable, etc.). Compose ships correct consumer rules; a blanket keep defeats lambda grouping, sourceInformation stripping, constant folding, and ComposerImpl devirtualization.
MUST NOT add -dontobfuscate or -dontoptimize to the release variant for "easier debugging". Measure with R8 on and use R8 retrace + mapping.txt for stack readability; debug code paths separately on the debug variant.
MUST rely on AGP 8.x's missing_rules.txt reporter to find narrow under-keeps. Do not pre-emptively keep packages.
MUST retrace any release crash with the variant's mapping.txt before drawing conclusions about the cause.
PREFERRED: apply the official Gradle plugins for libraries that need keep rules (kotlinx-serialization, Hilt, Moshi-codegen). The plugins emit the right rules automatically.
PREFERRED: track APK size in CI with Build → Analyze APK or a Gradle plugin so a regression in dex size flags an over-broad keep added by a future PR.
Verification
proguard-rules.pro contains zero lines matching ^-keep .* androidx\.compose\..
isMinifyEnabled = true and isShrinkResources = true are both set on the release buildType.
./gradlew :app:assembleRelease succeeds.
APK Analyzer shows the release classes.dex method count is meaningfully lower than the same release built with isMinifyEnabled = false.
Macrobenchmark startup with CompilationMode.Partial(BaselineProfileMode.Require) against the release variant is faster than the same benchmark with CompilationMode.None.
R8 retrace produces a readable stack from a captured release crash using app/build/outputs/mapping/release/mapping.txt.
If missing_rules.txt was generated, only the listed narrow keeps were added — no broadening.
