hardware-vibe-coding

name	hardware-vibe-coding
description	Hardware-aware code generation for TuyaOpen embedded projects. Reads the project's confirmed hardware (.tuyaopen/used-peripherals.json) + board catalog (.tuyaopen/board-context.md), confirms the selection with the user, records it BEFORE writing code, then delegates to the matching peripheral sub-skill. 外设初始化、硬件驱动、Vibe Coding、使用外设、硬件相关代码、点灯、点亮 LED、按键、 屏幕、显示、摄像头、音频、录音、播放、触摸、打印、红外、摇杆、灯带、串口、UART、 GPIO、PWM、I2C、SPI、ADC、传感器、引脚、片上外设、发送数据、读取传感器。
when_to_use	Use for ANY hardware / peripheral / pin request on a TuyaOpen board — using or initializing a peripheral, serial / UART, GPIO, PWM, I2C, SPI, ADC, display, camera, button, LED, audio, touch, sensor, or any "make the hardware do X" task. Load this skill FIRST; it is the entry point that reads the project's confirmed hardware, enforces confirm-before-code, and routes to the specific peripheral sub-skill. 任何涉及硬件/外设/引脚/串口的需求都先加载本 skill。
id	hardware-vibe-coding
surfaces	["embedded"]
tags	["hardware","peripheral","vibe-coding","routing"]

TuyaOpen Hardware Vibe Coding

Architecture

TDD (driver registration) → TDL (device management) → App (business logic).

board_register_hardware() registers only the device peripherals the board already adapted — the ones listed in board-context.md. For those, do not write TDD code. Any peripheral the user attaches themselves (not in board-context.md) you must register yourself in usr_board, even when the SDK already ships its TDD driver — you just call that existing driver with your pins. Writing a brand-new TDD driver (IC with no SDK driver) is only a sub-case of usr_board, never the trigger for it. On-chip peripherals are the other exception (call tal_*/tkl_* directly). See Rules.

Read these files first (your hardware context)

This skill is the authority. Read these yourself before doing anything:

1. .tuyaopen/used-peripherals.json — the already-confirmed hardware (device ID:s and/or onchip:<type><n>s). This is your INPUT: generate code for exactly these. Empty/missing → nothing confirmed yet.
2. .tuyaopen/board-context.md — a slim index of the board's device peripherals (display/camera/led/button/audio/touch/printer/…): each device's ID:, enable Kconfig:, grouping, and per-group registration semantics. Raw per-device data (pins / driver IC / resolution / timing) is not here — read it from .tuyaopen/ide/board.json (the same JSON, full detail).
3. .tuyaopen/ide/platform.json → peripherals — on-chip support + specs (uart/gpio/pwm/i2c/spi/qspi/adc/timer/watchdog/rtc/dma2d/vad/kws). For each type:
   • enabled — does this SoC support it. If false, do NOT generate code for it; tell the user it's unsupported on this platform.
   • count + spec — instance count and valid config (ports, pins, ranges, enums). Read these instead of hardcoding; values differ per platform. Consult before writing any on-chip code.
4. .tuyaopen/ide/board.json → expansionPins — the only pins the developer may freely wire (the board's broken-out pins), each with the functions it can mux to (GPIO, UART2_TX, I2C1_SCL, …). This — not the full SoC pinout — is the basis for "available pins". Empty/absent → the board is sealed: there are NO free pins; you can only use already-wired onboard peripherals.

Rules (must follow)

• Confirm before code (hard gate). Generate code ONLY for hardware listed in used-peripherals.json. If the request needs something not yet confirmed, or the catalog has multiple matches / any ## group —, ASK the user which one and wait — never auto-pick. When asking the user to choose, prefer an interactive multiple-choice prompt if your tooling supports one (otherwise list the options as text).
• Record before code. As soon as the selection is settled, full-overwrite used-peripherals.json (Step 3) BEFORE writing any code; update it if the set changes.
• Pick user-peripheral pins from expansionPins only. When you choose a pin for a user/on-chip peripheral or a usr_board device, pick a gpio from board.json.expansionPins whose functions include the role you need (e.g. a UART2 TX pin must list UART2_TX; a plain output needs GPIO). Never pick a pin that is not in expansionPins — it isn't physically accessible. If expansionPins is empty/absent, tell the user the board exposes no free pins and you cannot wire an external peripheral.
• "串口 / serial / UART" is ambiguous → ASK first. It may mean the debug/log console (PR_* — often a USB-serial the PC already sees; no peripheral, nothing recorded) OR a dedicated user UART (tal_uart on its own instance + pins — onchip:uart<N>). Do NOT assume PR_*; ask which before writing code.
• Where a device peripheral registers — decide by ADAPTATION, not by "does the SDK have a driver". A catalogued device peripheral in board-context.md is board-adapted → board_register_hardware() registers it; write no TDD code and no CONFIG_ENABLE_*. A device peripheral the user attaches externally (NOT in board-context.md) → you register it yourself in usr_board, reusing the SDK's existing TDD driver (e.g. an extra GPIO button → call tdd_gpio_button_register from usr_register_hardware()). The SDK shipping the driver does not mean board_register_hardware() wires your hardware — it only wires what the board adapted.

---

Step 1: Read the hardware context

Read the files above. board-context.md is the slim index; its fields:

Field	Meaning
## group — <id>	A multi-peripheral accessory / board configuration
Kconfig: (under a group)	Group-level config to write to app_default.config to activate the whole group
Devices: (under a group)	Registration semantics — how many logical devices to register (shared bus → 1)
Note: (under a group)	Bus sharing, init order, etc.
- <type> — <name> (ID: <id>) · <interface>	One device. ID: is the key you record in used-peripherals.json (Step 3)
Kconfig: (indented under a device)	That device's enable macro(s) to write to app_default.config
## Ungrouped devices	Devices that belong to no group

Per-device pins, driver IC, resolution and timing are NOT in board-context.md — look the device up by its ID: in .tuyaopen/ide/board.json (peripheralPatterns.<type>[], matched on id) and read pins / model / width×height there. (The enable Kconfig: is already in the index above.)

---

Step 2: Confirm Hardware Selection

STOP — do not write any code until the user has confirmed.

• Single instance, no groups → proceed.
• Multiple instances of the same type, or any ## group — <id> → MUST ask:

"Board has multiple <type> options. Which one?

1. <name/group> —
2. ..."

Wait for reply. The group's Devices: line tells you how many logical devices to register; look up each member's ID: in .tuyaopen/ide/board.json for pin/config details.

• Not in board-context.md at all → ask for interface and GPIO details.

---

Step 3: Record the Confirmed Hardware (before writing code)

The confirmed selection is the input to code generation, not an afterthought. As soon as the peripheral selection is settled (Step 2) — and BEFORE writing any code — full-overwrite .tuyaopen/used-peripherals.json with the confirmed set. Steps 4–5 then generate code for exactly those instances.

• peripherals = the ID: values from board-context.md for the confirmed instances (e.g. display-rgb-main, camera). Use the confirmed instance, not every option of that type — if the board has several displays and the user chose the 3.5" LCD, list only that one's ID.
• List all instances the project will use (already-used + this turn's), not just this turn's additions — it is a full snapshot, not a diff.
• For a custom peripheral added via usr-board with no board-context.md ID:, use its usr_board device name as the id. Also record it in .tuyaopen/custom-peripherals.json (id + category + pins) so the hardware view draws a node for it and marks its GPIOs — see usr-board/SKILL.md Step 6.
• On-chip peripherals use onchip:<type><n> (e.g. onchip:uart2). Record them as an object with the pins your code occupies so the diagram can mark those GPIOs: { "id": "onchip:uart2", "pins": [{"role":"tx","gpio":41},{"role":"rx","gpio":40}] }. (A bare string "onchip:uart2" is allowed but won't show pin occupancy.)
• If the set changes while you are writing code, update this file again so it always matches what the code targets.

This file drives the Vibe Coding Hardware View diagram in Project Details, and on later turns the host feeds it back to you as the confirmed hardware context — so getting it right here is what lets you skip re-confirming next time.

{
  "schemaVersion": 1,
  "updatedAt": "2026-01-01T00:00:00Z",
  "source": "vibe",
  "peripherals": [
    "display-rgb-main",
    "camera",
    { "id": "onchip:uart2", "pins": [{ "role": "tx", "gpio": 41 }, { "role": "rx", "gpio": 40 }] }
  ]
}

---

Step 4: Check Kconfig

Board-adapted peripherals (listed in board-context.md):

• Kconfig to activate — write the Kconfig: shown in board-context.md to app_default.config: the group-level Kconfig: for a group, or the device's own indented Kconfig: for a standalone device.
• Driver-enable macros (ENABLE_DISPLAY, DISPLAY_NAME, etc.) — already selected by the board Kconfig internally. Do NOT write these.

New custom peripherals (not in board-context.md, added via usr_board) — you may need to enable the peripheral in app_default.config, e.g. CONFIG_ENABLE_DISPLAY=y. Check the matching peripheral skill for the correct macro.

Never write platform-level macros (CONFIG_ENABLE_SPI, CONFIG_ENABLE_I2C, CONFIG_ENABLE_GPIO) — those are selected by the platform/board Kconfig.

---

Step 5: Delegate to Peripheral Skill (generate code)

Type	Skill file
display	peripheral-drivers/peripheral-display/SKILL.md
camera	peripheral-drivers/peripheral-camera/SKILL.md
button	peripheral-drivers/peripheral-button/SKILL.md
led	peripheral-drivers/peripheral-led/SKILL.md
audio	peripheral-drivers/peripheral-audio/SKILL.md
touchpad / touch	peripheral-drivers/peripheral-touch/SKILL.md
printer	peripheral-drivers/peripheral-printer/SKILL.md
ir / infrared / remote	peripheral-drivers/peripheral-ir/SKILL.md
joystick / rocker	peripheral-drivers/peripheral-joystick/SKILL.md
leds-pixel / WS2812 / addressable strip	peripheral-drivers/peripheral-leds-pixel/SKILL.md

The last three (ir / joystick / leds-pixel) are commonly custom peripherals not present in board-context.md — register them via the usr-board flow and add the matching CONFIG_ENABLE_* macro to app_default.config.

Not in board-context.md → peripheral-drivers/usr-board/SKILL.md.

On-chip peripherals (SoC buses/pins — not catalogued device parts)

For raw on-chip use (serial data, pin toggling, PWM, bus access, analog read). These call tal_* / tkl_* directly — no board_register_hardware(), no CONFIG_ENABLE_* (platform-selected). Confirm the instance + pins and record as onchip:<type><n> in used-peripherals.json.

Type	Skill file
uart / serial (user serial, not PR_* logging)	peripheral-drivers/onchip-uart/SKILL.md
gpio / pin level / edge IRQ	peripheral-drivers/onchip-gpio/SKILL.md
pwm / dimming / buzzer / servo	peripheral-drivers/onchip-pwm/SKILL.md
i2c / iic / sensor bus	peripheral-drivers/onchip-i2c/SKILL.md
spi bus master	peripheral-drivers/onchip-spi/SKILL.md
qspi / quad-SPI (raw; catalogued QSPI LCD → display skill)	peripheral-drivers/onchip-qspi/SKILL.md
adc / analog read / voltage	peripheral-drivers/onchip-adc/SKILL.md
timer / hardware timer / periodic callback	peripheral-drivers/onchip-timer/SKILL.md
watchdog / wdt / feed dog	peripheral-drivers/onchip-watchdog/SKILL.md
rtc / real-time clock	peripheral-drivers/onchip-rtc/SKILL.md
dma2d / pixel-format convert / fast blit	peripheral-drivers/onchip-dma2d/SKILL.md
vad / voice activity (speech vs silence)	peripheral-drivers/onchip-vad/SKILL.md
kws / wake word / keyword spotting	peripheral-drivers/onchip-kws/SKILL.md

Serial "hello world" is ambiguous — ask first, don't auto-pick. "用串口发 X" can mean the debug/log console (PR_*, often a USB-serial the PC already sees — no peripheral, nothing recorded) OR a dedicated user UART (tal_uart on its own instance + pins — onchip-uart, a confirmed peripheral). Ask which before coding.

---

Code Organisation

• New feature → new source/embedded/src/app_<feature>.c + app_<feature>.h
• tuya_app_main.c only adds #include + one call — no logic inline
• src/ is auto-scanned by CMake, no CMakeLists change needed

Entry Point

board_register_hardware() is declared in board_com_api.h — always include it (not board_register.h / board_register_hardware.h, which do not exist). tal_api.h covers tal_log_init / tal_sw_timer_init / tal_workq_init; tkl_output.h provides tkl_log_output.

#include "tal_api.h"
#include "tkl_output.h"
#include "board_com_api.h"   // board_register_hardware()
#include "app_xxx.h"

void user_main(void)
{
    tal_log_init(TAL_LOG_LEVEL_DEBUG, 4096, (TAL_LOG_OUTPUT_CB)tkl_log_output);
    tal_sw_timer_init();   // before any tdl_*_open()
    tal_workq_init();
    board_register_hardware();
    app_xxx_init();
}

Coding Style

POSIX C: static void, const int — never STATIC, VOID, CONST. SDK typedefs in uppercase are fine (OPERATE_RET, TDL_LED_HANDLE_T).