bioconductor-edger

name	bioconductor-edger
description	Estimates differential gene expression for short read sequence count using methods appropriate for count data. If you have paired data you may also want to consider Tophat/Cufflinks. Input must be raw count data for each sequence arranged i
when_to_use	Use when: Bulk RNA-seq differential expression; ChIP-seq read count differential binding; ATAC-seq differential accessibility; Multi-group comparisons with contrasts; Complex experimental designs (factorial, nested, batch)
user-invocable	false

edgeR — Comprehensive Skill Guide

Domain: RNA-seq / ChIP-seq / ATAC-seq Bioconductor: edgeR Paper: Robinson MD, McCarthy DJ, Smyth GK (2010). Bioinformatics, 26:139-140.

Empirical analysis of digital gene expression data. Handles small sample sizes well; supports a wide range of experimental designs via generalized linear models.

Dependencies & Environment

Package-intrinsic requirements from the Bioconductor landing page — reproduce in any R environment.

• Version: 4.10.1 · Bioconductor: 3.23 · R: ≥ 4.6
• Depends: limma
• Imports: locfit
• Install: BiocManager::install("edgeR")

When to Use

• Bulk RNA-seq differential expression
• ChIP-seq read count differential binding
• ATAC-seq differential accessibility
• Multi-group comparisons with contrasts
• Complex experimental designs (factorial, nested, batch)

Alternatives: DESeq2, limma-voom, NOISeq

Do NOT Use When

• Pre-normalized data (TPM, FPKM, RPKM) — requires raw counts.
• Continuous phenotype association — use linear regression or limma.
• Single-cell RNA-seq — use Seurat, scran, or muscat for pseudobulk.
• Proteomics/metabolomics unless data genuinely follows negative binomial.

Data Requirements

Requirement	Details
Min Replicates	≥2 per group; n=2 is supported but power is very low
Input Format	Raw integer count matrix (genes × samples)
Must Not Use	Normalized values; edgeR normalizes internally via TMM
Coverage	≥5M aligned reads per sample typical for bulk RNA-seq

Installation

if (!require("BiocManager", quietly=TRUE))
    install.packages("BiocManager")
BiocManager::install("edgeR")
library(edgeR)

Workflows

Standard GLM Workflow (Quasi-Likelihood)

Recommended for most RNA-seq experiments

Setup DGEList

library(edgeR)
d <- DGEList(counts=counts, group=group)

Filter and normalise

keep <- filterByExpr(d)
d <- d[keep,]
d <- calcNormFactors(d)             # TMM normalisation

Design matrix and dispersion

design <- model.matrix(~group)
d <- estimateDisp(d, design, robust=TRUE)
plotBCV(d)                          # check BCV estimates

Fit and test

fit <- glmQLFit(d, design, robust=TRUE)
qlf <- glmQLFTest(fit, coef=2)     # test second coefficient (vs intercept)
plotQLDisp(fit)                     # check quasi-likelihood dispersion
top <- topTags(qlf, n=Inf)$table
sig <- top[top$FDR < 0.05,]

Multi-group Contrasts

Pairwise comparisons between multiple groups

Build contrasts

group <- factor(c("A","A","B","B","C","C"))
design <- model.matrix(~0+group)     # no intercept for cleaner contrasts
colnames(design) <- levels(group)
d <- estimateDisp(d, design)
fit <- glmQLFit(d, design)
contr <- makeContrasts(BvsA=B-A, CvsA=C-A, BvsC=B-C, levels=design)
res_BvsA <- glmQLFTest(fit, contrast=contr[,"BvsA"]
topTagsres_BvsA

Key Functions & Parameters

DGEList()

Container for count data

Parameter	Description
counts	matrix of raw counts (genes × samples)
group	factor of sample groups
lib.size	optional: library sizes (computed automatically if absent)
norm.factors	optional: normalisation factors

filterByExpr()

Automatic count filter — removes lowly expressed genes

Parameter	Description
y	DGEList
group	factor (uses y$samples$group if absent)
min.count	minimum count per sample (default 10)
min.total.count	minimum total count (default 15)

calcNormFactors()

Compute TMM normalisation factors

Parameter	Description
object	DGEList
method	'TMM' (default) | 'TMMwspll' | 'RLE' | 'upperquartile' | 'none'

estimateDisp()

Estimate common and tagwise dispersions (BCV)

Parameter	Description
y	DGEList
design	model matrix from model.matrix()
robust	logical; robust estimation (default FALSE)
trend.method	'locfit' | 'none' | 'movingave'

glmQLFit()

Fit quasi-likelihood negative binomial GLM (preferred for small n)

Parameter	Description
y	DGEList
design	model matrix
robust	logical; robustify prior df estimation

glmQLFTest()

Quasi-likelihood F-test for coefficient(s)

Parameter	Description
glmfit	DGEGLM from glmQLFit
coef	column index/name of design matrix to test
contrast	contrast vector/matrix instead of coef

topTags()

Extract top DE genes from test result

Parameter	Description
object	DGELRT or DGEExact
n	number of genes (default 10; use Inf for all)
adjust.method	'BH' (default) | 'BY' | 'holm' | 'none'
sort.by	'PValue' | 'logFC' | 'none'

Scientific Assumptions

The method assumes the following about your data and experiment:

• Counts are negative binomial distributed.
• Dispersion is shared across genes with similar expression (empirical Bayes shrinkage).
• Most genes are NOT differentially expressed (used in TMM normalization).
• The quasi-likelihood F-test (QLF) accounts for additional gene-level variation not captured by NB.

Result Interpretation

• logFC: log2 fold-change; positive = higher in first group of contrast.
• PValue / FDR: BH-adjusted FDR; standard cutoff FDR < 0.05.
• logCPM: average log2-CPM (counts per million) — low logCPM → low-count gene, LFC less reliable.
• F statistic (QLF): larger F = more evidence for DE; compare across genes, not absolute value.
• Use plotBCV() to inspect biological coefficient of variation — unusually high BCV indicates outlier samples.
• Use plotSmear() as an MA plot equivalent to check for systematic bias.

Best Practices

• Use filterByExpr() for automatic gene filtering — it accounts for library size.
• TMM normalisation (calcNormFactors) is the default and works well for most datasets.
• Use glmQLFit + glmQLFTest for small sample sizes (n<10 per group).
• Use glmFit + glmLRT for large datasets — slightly more powerful but less robust.
• Always provide a design matrix (model.matrix()) for multi-factor experiments.
• For pairwise contrasts use makeContrasts() — do not subset samples post-hoc.
• Plot plotBCV(d) and plotQLDisp(fit) to check dispersion estimates.
• For ChIP-seq: use csaw windows instead of gene-level counts.

When to Choose This vs Alternatives

Alternative	Prefer this tool when	Prefer alternative when
DESeq2	You need GLM quasi-likelihood tests; complex multifactor designs; very small n (n=2).	You prefer apeglm LFC shrinkage or want IHW for multiple testing.
limma-voom	You have large datasets or complex contrasts that benefit from linear model flexibility.	You prefer moderated t-statistics and eBayes; microarray or large n (≥5/group).

Benchmark Evidence

Key studies that have validated or benchmarked this tool:

• Robinson MD, McCarthy DJ, Smyth GK (2010). Bioinformatics 26:139. PMID:19910308
  Original edgeR paper; empirical Bayes dispersion estimation outperforms Poisson models.

• Law CW et al. (2014). Genome Biol 15:R29. PMID:24926665
  edgeR-QLF and limma-voom show best performance for RNA-seq DE across sample sizes.

Common Errors & Troubleshooting

Error in estimateDisp: no residual df

Cause: Saturated model — number of coefficients equals number of samples

Fix: Reduce model complexity or add replicates

dispersion values all negative

Cause: Very few samples; BCV estimate is unstable

Fix: Use estimateGLMCommonDisp with method='deviance'

From Community Q&A (Biostars)

• Are unequal sample sizes in differential gene expression (DGE) analysis a problem for edgeR DESeq2 a
• Contrasts for comparing condition within tissue
• Seeking Advice on Using edgeR and variancePartition for RNA-seq Data with Multiple Tissues and P
• DEG analysis of RNA-seq data across multiple tissues and two conditions
• Error in edgeR/Deseq2 Analysis

Additional Notes from Official Documentation

Extracted from the edgeR Bioconductor vignette(s)

What is it?

edgeR is a package for differential analyses of read count data from sequencing technologies such as RNA-seq, ChIP-seq, ATAC-seq, BS-seq and CUT&RUN. It has particularly strong capabilities for expression analyses of RNA-seq data, including gene expression, transcript expression and tests for differential splicing. edgeR implements novel statistical methods based on the negative binomial distribution as a model for count variability, including empirical Bayes methods, exact tests, and generalized linear models. The package is especially suitable for analysing designed experiments with multiple experimental factors but possibly small numbers of replicates. It has unique abilities to model transcript specific variation even in small samples, a capability essential for prioritizing genes or

How to get help

The edgeR User’s Guide is available by or alternatively from the edgeR landing page . Documentation for specific functions is available through the usual R help system, e.g., ?glmFit . Further questions about the package should be directed to the Bioconductor support site .

> library(edgeR)
> edgeRUsersGuide()

Further reading

Chen Y, Chen L, Lun ATL, Baldoni PL, Smyth GK (2024). edgeR 4.0: powerful differential analysis of sequencing data with expanded functionality and improved support for small counts and larger datasets. bioRxiv doi: 10.1101/2024.01.21.576131 . Chen, Y, Pal, B, Visvader, JE, Smyth, GK (2017). Differential methylation analysis of reduced representation bisulfite sequencing experiments using edgeR. F1000Research 6, 2055. doi:10.12688/f1000research.13196.2 Chen Y, Lun ATL, Smyth GK (2016). From reads to genes to pathways: differential expression analysis of RNA-Seq experiments using Rsubread and the edgeR quasi-likelihood pipeline. F1000Research 5, 1438. doi:10.12688/f1000research.8987.2 McCarthy, DJ, Chen, Y, Smyth, GK (2012). Differential expression analysis of multifactor RNA-Seq experiment

Resources

• Bioconductor page: https://bioconductor.org/packages/release/bioc/html/edgeR.html
• Vignette: https://bioconductor.org/packages/release/bioc/vignettes/edgeR/inst/doc/edgeRUsersGuide.pdf
• GitHub: https://github.com/Bioconductor/edgeR
• Bioconductor support forum: https://support.bioconductor.org/
• Paper: Robinson MD, McCarthy DJ, Smyth GK (2010). Bioinformatics, 26:139-140.

---

---

Run this on BioMate

This skill is the knowledge layer — when, why, and how to use edger. To run this analysis on your own data with managed compute, automated QC, and reproducible outputs, use BioMate — free to start.

▶ Open edger on BioMate →