rule-curator

name	rule-curator
description	Use when auditing, pruning, or cleaning up an agent's entire existing rule set in one bulk pass across every rule source at once (all CLAUDE.md files, all memory entries, AGENTS.md, ADRs, COORDINATION). This is whole-corpus hygiene; NOT for adding, editing, or fixing an individual rule (just edit that file directly).

Rule Curator

Overview

Agents accumulate behavioral rules across many files. Nobody prunes them, so they go stale, duplicate each other, duplicate installed skills, restate default behavior, or impose rituals whose friction exceeds their value.

Core principle: every rule is a permanent tax. It costs context tokens every session and dilutes instruction-following attention across more directives. A rule earns its place only if its behavioral payoff beats that ongoing cost. This skill audits the rule set against that bar and acts on the result.

This skill exists because a capable model, left to its own devices, finds the loud defects (conflicts, staleness, duplication) but skips the quiet ones (brittle rules, misfiled entries), never separates a rule's neutral effect from the critique of it, and produces prose instead of a usable deliverable. The workflow below forces all four.

When to use

• "Audit / clean up / prune my CLAUDE.md / rules / memory"
• After a big refactor or decision, to find rules that went stale
• The rule set has grown and instruction-following feels diluted
• Periodic hygiene on the directives an agent operates under

Not for: authoring new rules (this curates existing ones), or auditing PRDs and feature specs (those are bounded deliverable specs, not standing rules).

Workflow

Copy this checklist and track progress:

Rule Curator progress:
- [ ] 1. Discover rule sources (+ enumerate installed skills and ADRs; pin each repo's commit)
- [ ] 2. SCOPE GATE: confirm/narrow/expand sources + emphasis (default: all, full)
- [ ] 3. Extract rules into rules.json
- [ ] 4. Analyze each rule against the whole corpus (impact + conditional audit note)
- [ ] 5. PRE-CURATE CHECKPOINT: report "N rules, K flagged"; proceed
- [ ] 6. Build the curation UI (run build_curator.py)
- [ ] 7. Human curates in browser, exports decisions.json
- [ ] 8. Build the apply-plan from decisions.json
- [ ] 9. APPLY GATE: confirm, then execute the edits

1. Discover

A rule is a standing directive that shapes behavior across tasks (do / never / prefer / always / use X not Y). That is the inclusion test, not a file list. A bounded deliverable spec (PRD, feature spec) is not a rule. Neither is a work-status entry — a ship log, phase tracker, or "next step" note (common in memory systems, often type: project): it is bounded work-tracking that ages into noise, not a standing directive.

But a work-status entry often buries one durable directive ("never query the legacy table", "don't re-add X", "this finals refresh must clear the sticky field"). When it does, the entry as a whole is not a standing rule, yet the buried directive must survive. The correct verdict is extract the directive to a clean rule entry and archive/trim the surrounding log — neither keep the whole log (dead weight, and a weak model will rubber-stamp it as healthy) nor drop it wholesale (loses the directive).

Auto-detect the sources that exist and contain standing directives:

• Global ~/.claude/CLAUDE.md and project CLAUDE.md (including nested)
• Memory: MEMORY.md plus every entry it points to
• Project rule docs: AGENTS.md, COORDINATION.md, primers, conventions
• ADR-type decision records, however named (docs/adr/*, docs/decisions/*, RFCs). Extract only the binding constraint, not the narrative.

Also enumerate installed skills (names + descriptions) and the ADRs found, so "duplicates a skill / duplicates an ADR" findings are grounded, not guessed. PRDs and feature specs are excluded by default; a user may add sources at the scope gate. If nothing is found, report and stop. Never fabricate a rule set.

Search wider than the repo before declaring anything missing. Rule sources, and the trackers they cite, often sit above the project root or outside it entirely (~/.claude/, a parent directory, a sibling checkout). A repo-scoped search returning nothing is not evidence a file is absent. Widen the search before writing "does not exist" into an audit note, and record the resolved absolute path so the next reader does not repeat the hunt. An unqualified filename in a rule is itself a finding — flag it Brittle and qualify it.

Pin the corpus. A corpus routinely spans more than one repo — the global ~/.claude config and the project repo are usually two — plus files under no repo at all, so one commit cannot pin it. For every distinct repo that contributes sources, record a pin (git rev-parse --short HEAD, branch, dirty-tree state) and carry the list as meta.commits in rules.json. The UI header displays the pins and both exports embed them, so a decisions.json that comes back days later can be checked against the trees it was computed from. Rule files outside any repo (a memory directory, an untracked global config) have no pin — say so in meta.sources rather than implying the whole corpus is pinned.

2. Scope gate (required, defaults to proceed)

Present the discovered sources and a rough rule count, tagging each source tracked or untracked — an untracked source has no history, so a drop there is unrecoverable, and the human should know that before curating, not after. Offer to confirm, narrow, or expand the source set, and optionally to focus ("general health audit" vs "hunting duplicates / staleness / bloat"). If the user just says go: all sources, full audit. Running unattended: take that default.

3. Extract

Normalize each rule into the schema build_curator.py consumes:

{
  "meta": { "title": "...", "generated": "YYYY-MM-DD",
            "commits": [ { "root": "~/.claude", "hash": "abc1234", "branch": "main", "dirty": false } ],
            "sources": ["..."] },
  "categories": [ { "id": "global-claudemd", "label": "Global · CLAUDE.md", "color": "#c0392b" } ]
   
    
         
         
         
         
       
    
  

Group categories by source/kind (global vs project, CLAUDE.md vs memory vs ADR vs convention). One rule per standing directive.

4. Analyze (against the whole corpus)

Two outputs per rule, explicitly separated so the human gets facts and critique as distinct things. This separation is mandatory; do not fuse verdict and reasoning into one blob.

• agentImpact — always. Neutral-diagnostic, first person. What following this rule actually changes about your behavior, plus its side effect / cost. When a rule merely restates default behavior, say so plainly ("restates default behavior; changes nothing distinctive"). That is the finding the human cannot see for themselves.
• auditNote — only when something is wrong. The opinionated health/cost judgment, drawn from the fixed taxonomy below. Omit it when the rule is healthy. Forcing a note onto every rule manufactures fake problems.
• auditCategory — whenever auditNote is present. The taxonomy row's name verbatim from the left column below, nothing invented. The UI renders it as the flag tag on the card, which is what makes an unhealthy rule findable while scrolling; without it the card still flags, just with the generic word.

Audit category	Fires when
Redundant	Duplicates another rule, or an installed skill / ADR
Stale / superseded	References changed files or decisions; a newer rule overrides it
Misfiled	Wrong home (a template stored as "feedback"; a project rule in global config)
Low-yield ritual	Friction exceeds value
Not actionable	Too vague to change behavior
Brittle	Will rot (hardcoded word lists, dates, paths)
Conflicts	Contradicts another rule

Run the whole taxonomy against every rule. The easy categories (Conflicts, Stale) get found on their own; Brittle and Misfiled are the ones routinely missed, so check them explicitly. Redundancy, Conflicts, and Supersession are only visible across the corpus, so analyze with all rules and the skill/ADR list in view, never each rule in isolation.

Use version history as evidence where it exists. History turns two categories from judgment into fact: for Stale / superseded, git log -S finds the superseding commit — exactly the evidence the no-invented-staleness discipline demands you name; for Brittle, repeated edits to the same hardcoded list, path, or count document the rot. Either way the note cites what changed, never the bare count: history is corroboration, not the finding, and age alone (or churn alone) is not an audit note. Where sources are untracked, say so rather than silently applying a weaker standard to half the corpus. Command-level detail and the guards live in the Stale and Brittle sections of the analysis contract.

Full rubric, category tests, and worked good/bad examples: see references/analysis-contract.md.

5. Pre-curate checkpoint (informational)

Report "analyzed N rules, flagged K" with the per-category breakdown. Then name any cross-cutting patterns — the same defect or structure recurring across 3+ rules, which the per-rule notes fragment into separate line-items. Each pattern is one line: the habit, the rule IDs it spans, and the single fix that applies corpus-wide. The common ones:

• Systemic over-specification — many rules pair a durable one-line directive with rot-prone provenance (commit hashes, line numbers, counts, dates). Fix: keep the directive, move provenance to a footer or drop it.
• Duplicate / overlap cluster — 3+ rules covering the same territory; candidates for one consolidated rule the others point to.
• Misfiling habit — several entries of one type carrying another type's content.
• Work-status habit — multiple logs burying standing directives.

No invented patterns. A pattern must name 3+ real rules; a 2-rule overlap is already a per-rule Redundant/Conflicts note and needs no roll-up. Don't promote a one-off to look thorough — same discipline as "no invented staleness." If nothing recurs across 3+ rules, say "no cross-cutting patterns" and move on.

Then proceed. Offer a last chance to re-scope; do not block waiting for input.

6. Build the curation UI

Run the bundled script (standard library only, no install):

python build_curator.py rules.json -o rule-curator.html

It injects the data into curator-template.html and writes one self-contained file. The user double-clicks it; decisions persist locally; it exports decisions.json and a markdown summary.

7. Curate (human)

Per rule, the human marks Reviewed, Drop, or Modify (with optional replacement text and notes), then exports decisions.json. Keep is the default: a rule left untouched stays unchanged. "Reviewed" records that the human looked at it and kept it (so an untouched rule reads as not-yet-examined, not as an implicit decision). Only Drop and Modify change files.

8-9. Apply-plan and apply gate

Read decisions.json, compute the exact edits against current file contents, and emit an auditable apply-plan. Then confirm once ("apply these N edits?") and execute. Per-verdict edits, drift handling, and the plan format: see references/apply-plan-format.md.

Where sources are pinned, meta.commits makes drift detection a lookup instead of a diff — but only for files clean at both ends. Per pinned repo, git log --oneline <hash>..HEAD -- <sources> names committed drift and git status --porcelain -- <sources> names uncommitted drift; only a file absent from both is unchanged. Any file dirty now, or belonging to a pin recorded dirty, gets the textual comparison instead — the commit range proves nothing about content that was never committed. Curation happens on human time — hours or days — so drift is the normal case, not the edge case.

If the corpus is not version-controlled, say so before applying. Dropping a rule is destructive and unrecoverable without history; a memory entry deleted from an untracked directory is simply gone. One sentence at the apply gate is enough ("these sources have no version history — drops are unrecoverable"), and recommending git init on the rule directory afterward is usually the highest- value follow-up this skill can leave behind: the next audit gets to see what changed and whether the last pruning held.

Disciplines (hold these)

No rubber-stamping. The default failure is "good rule, keep it." Every rule gets its honest cost named in agentImpact. A rule that restates default behavior is dead weight; say so even when it sounds wise.

No invented staleness. An auditNote of "stale" / "superseded" / "duplicates X" must be tied to actual corpus evidence (the conflicting rule, the superseding ADR, the duplicated skill). Never guess a problem onto a healthy, current rule to look thorough. A healthy rule gets no audit note.

Red flags — stop and recheck

• You gave a rule a verdict without writing its agentImpact.
• You wrote an auditNote on every rule (manufactured problems).
• You praised a rule's specificity without checking if its list/date/path will rot (Brittle).
• You judged a memory entry's content but not whether its type fits (Misfiled).
• You called something stale without naming what supersedes it.
• You wrote "does not exist" into an audit note after only a repo-scoped search.
• You treated a rule's age — or its churn — as an audit note without naming a superseding change or the value that kept rotting.
• You fused "what it does" and "what's wrong with it" into one verdict blob.
• You marked a work-status entry (ship log / phase tracker) as a standing rule and kept it whole, instead of extracting its buried directive and archiving the log.
• You reported the checkpoint as counts only, without checking whether the flagged rules share a cross-cutting pattern (3+ recurrence) the per-rule notes fragment.

Common mistakes

• Analyzing rules one at a time. Cross-rule findings need the whole corpus loaded at once.
• Skipping the skill/ADR enumeration, then guessing at duplication.
• Treating PRDs as rule sources and flooding the audit with feature requirements.
• Writing back blind. Recompute the apply-plan against current files; skip rules whose text drifted since curation.
• Concluding a cited file is missing from a repo-scoped search. Trackers and rule sources routinely live above the project root; widen before you write it down.
• Applying drops to an untracked corpus without saying so. The human should know a drop is unrecoverable before they approve it, not after.
• Declaring "no drift" from a commit-range lookup alone. Uncommitted edits never appear in git log; check git status too, and textual-compare dirty files.