메뉴
Complete workflow for heat transfer analysis - steady-state and transient thermal. Use when user asks about temperature distribution, conduction, convection, or heat flow.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
SOC 직업 분류 기준
| name | abaqus-thermal-analysis |
| description | Complete workflow for heat transfer analysis - steady-state and transient thermal. Use when user asks about temperature distribution, conduction, convection, or heat flow. |
| allowed-tools | ["Read","Write","Edit","Glob","Grep","Bash(abaqus:*)","Skill"] |
Heat transfer analysis for steady-state or transient temperature distribution. Use when user needs temperature field without mechanical stress.
Route here when user mentions:
Route elsewhere:
/abaqus-coupled-analysis/abaqus-static-analysis/abaqus-fieldBefore thermal analysis:
Ask if unclear:
| User Wants | Analysis Type |
|---|---|
| Final equilibrium temperature | STEADY_STATE |
| Temperature vs time history | TRANSIENT |
| Cool-down or heat-up time | TRANSIENT |
| Just the end result | STEADY_STATE |
Decision rule: Use steady-state unless user needs temperature history or time-dependent behavior.
| Property | Required For | Units (SI-mm) |
|---|---|---|
| Conductivity (k) | All thermal | mW/(mm·K) |
| Specific heat (cp) | Transient | mJ/(tonne·K) |
| Density (ρ) | Transient | tonne/mm³ |
Common materials (SI-mm units):
| Material | k | cp | ρ |
|---|---|---|---|
| Steel | 50 | 5.0e11 | 7.85e-9 |
| Aluminum | 167 | 9.0e11 | 2.70e-9 |
| Copper | 385 | 3.85e11 | 8.96e-9 |
| BC Type | Use For | Required Inputs |
|---|---|---|
| TemperatureBC | Fixed temperature surface | Temperature value |
| FilmCondition | Convection to ambient | Film coeff, sink temp |
| SurfaceHeatFlux | Heat input | Flux magnitude (mW/mm²) |
| RadiationToAmbient | Radiation cooling | Emissivity, ambient temp |
| BodyHeatFlux | Internal heat generation | Volumetric heat rate |
Minimum requirement: At least one temperature BC or heat flux boundary.
| Parameter | Steady-State | Transient |
|---|---|---|
| response | STEADY_STATE | TRANSIENT |
| timePeriod | 1.0 (arbitrary) | Actual duration (s) |
| initialInc | - | Start increment |
| maxInc | - | Largest allowed increment |
| deltmx | - | Max temp change per increment |
| Element | Use |
|---|---|
| DC3D8 | Standard 8-node hex (recommended) |
| DC3D4 | 4-node tet (for complex geometry) |
| DC3D20 | 20-node hex (high accuracy) |
Note: Heat transfer elements (DC*) are different from structural elements (C3D*).
Request these field outputs:
After analysis, verify:
| Problem | Likely Cause | Solution |
|---|---|---|
| Temperature oscillation | Large increments in transient | Reduce maxInc or deltmx |
| Non-physical temperature | Unit mismatch | Verify k, cp, ρ units |
| No heat flow | Missing BC or bad region | Check boundary conditions |
| Negative temperature (Kelvin) | Bad setup | Review initial conditions |
/abaqus-coupled-analysis - Thermal + structural (thermomechanical)/abaqus-material - Thermal material properties/abaqus-field - Initial temperature fieldsFor API syntax and code examples, see:
Orchestrate evidence-backed ANSYS Workbench and Mechanical structural analyses through a configured MCP, including capability discovery, existing-project or CAD intake, materials, named selections, connections, loads, high-quality mesh planning and repair, solving, convergence diagnosis, deterministic validation, and report export. Use for linear static, nonlinear static, contact, modal, eigenvalue buckling, or related structural-analysis work when Codex must operate or inspect a live Workbench session instead of only explaining theory.
Use this skill when driving CST Studio Suite through the CST MCP for electromagnetic simulation workflows: creating or opening CST projects, resolving missing inputs, selecting templates, setting up geometry/materials/ports/boundaries/mesh/solvers/monitors, running or planning simulations, extracting S-parameters/far-field/near-field/eigenmode results, validating outputs, parameter sweeps, optimization handoff, and report generation.
CST Studio Suite 正式生产入口。覆盖 session 管理、几何建模、参数优化、仿真、S11/远场结果读取和审计落盘。当用户要求使用 CLI/runtime 执行 CST 操作时调用此 Skill。
当用户要求使用 CLI/runtime 执行 CST 参数优化循环、S11 指标迭代、多轮仿真对比时调用此 Skill。本 Skill 依赖 cst-runtime-cli 提供基础设施，不携带 runtime scripts，所有 CLI 调用走 base skill 的 uv run python -m cst_runtime 入口。
Analyze multi-body contact. Use when user mentions parts touching, friction between surfaces, bolt-plate contact, press fit, or assembly with contact.
Complete workflow for coupled thermomechanical analysis. Use when user mentions thermal stress, thermal expansion, or temperature causing deformation.