메뉴
Renaming a C file or associated header (.h) file requires additional steps in decompilation projects or the build will fail. Use this skill when you want to rename a C file and/or a header file.
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/cdlewis/snowboardkids2-decomp --skill rename-a-c-file-or-header-file명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
Match a segments bss data by replacing extern declarations with the appropriate definitions. Use when asked to match, add, split, or fix a .bss segment, especially after checksum failures from bss symbol layout, shifted VRAM labels, queue/stack buffers, or unresolved bss externs.
Convert arrays with hardcoded pointer addresses to use ROM_START/ROM_END symbols. This automates the process of adding USE_ASSET declarations, updating array initialization, and configuring YAML segments.
Use this skill if you need to decompile a function using F3Dex2 or S2Dex. The presence of the Gfx type or gRegionAllocPtr are strongly indicative of an F3Dex2 or S2Dex microcode function.
SOC 직업 분류 기준
SKILL.md 표시 중
| name | rename-a-c-file-or-header-file |
| description | Renaming a C file or associated header (.h) file requires additional steps in decompilation projects or the build will fail. Use this skill when you want to rename a C file and/or a header file. |
C files and their associated header files are mapped to specific ROM addresses via the Splat project configuration in snowboardkids2.yaml.
A file will typically have a code segment, such as:
- [0x4A40, c]
It may also have data and/or rodata segments. Data segment(s) are mapped to the code via the third argument. The name specified in the third argument must match the name of the code segment. In this case the code segment has no name so it defaults to using its ROM address as a name (4A40). For example:
- [0x8CBA0, .data, 4A40]
To rename 4A40.c to credits.c, we would need to do the following:
- [0x4A40, c, credits]
...
- [0x8CBA0, .data, credits]
Naturally, the reverse is also true. To rename a segment that has already been named, you must change each instance of that name to the new name. In this case you would need to change 'credits' to your desired new file name.
In rare cases a C file will have a custom compiler flags. Be sure to check the project Makefile and update the C file's name there also.