소스 정보
- 저장소
- CyberStrikeus/CyberStrike
- 최근 소스 활동
- 2026년 4월 22일 14:48
- 감지된 SKILL.md 언어
- 영어
- 스타
- 1,653
- 포크
- 254
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
메뉴
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
Codex 또는 Claude로 설치 이 Prompt를 복사해 Codex, Claude 또는 다른 어시스턴트에 붙여 넣으면 Skill 페이지를 검토하고 설치를 진행할 수 있습니다.
직접 명령은 검토 Prompt를 거치지 않습니다. 실행하기 전에 소스를 확인하세요.
npx skills add https://github.com/CyberStrikeus/CyberStrike --skill cis-ubuntu2004-v300-1-1-2-1-1명령은 한 줄로 유지됩니다. 복사하기 전에 가로로 스크롤해 전체 내용을 확인하세요.
로컬 사본을 원하시나요? SkillsMP에서 현재 제공할 수 있는 파일을 다운로드하세요.
macOS post-exploitation for credential harvesting, DTrace monitoring, TCC bypass, and stealth operations via native tools
Windows userland post-exploitation for credential harvesting, monitoring, AMSI/ETW bypass, and stealth operations
Kubernetes post-exploitation for container escape, secret extraction, RBAC abuse, and cluster persistence
SOC 직업 분류 기준
SKILL.md 표시 중
| name | cis-ubuntu2004-v300-1-1-2-1-1 |
| description | Ensure /tmp is a separate partition |
| category | cis-storage |
| version | 3.0.0 |
| author | cyberstrike-official |
| tags | ["cis","ubuntu","linux","ubuntu-20.04","partition"] |
| cis_id | 1.1.2.1.1 |
| cis_benchmark | CIS Ubuntu Linux 20.04 LTS Benchmark v3.0.0 |
| tech_stack | ["ubuntu","linux"] |
| cwe_ids | [] |
| chains_with | [] |
| prerequisites | [] |
| severity_boost | {} |
Level 1 - Server, Level 1 - Workstation, Assessment: Automated
The /tmp directory is a world-writable directory used for temporary storage by all users and some applications.
Note: If an entry for /tmp exists in /etc/fstab it will take precedence over entries in a systemd unit file. There is an exception to this when a system is diskless and connected to iSCSI, entries in /etc/fstab may not take precedence over a systemd unit file.
Making /tmp its own file system allows an administrator to set additional mount options such as the noexec option on the mount, making /tmp useless for an attacker to install executable code. It would also prevent an attacker from establishing a hard link to a system setuid program and wait for it to be updated. Once the program was updated, the hard link would be broken, and the attacker would have his own copy of the program. If the program happened to have a security vulnerability, the attacker could continue to exploit the known flaw.
This can be accomplished by either mounting tmpfs to /tmp, or creating a separate partition for /tmp.
By design files saved to /tmp should have no expectation of surviving a reboot of the system. tmpfs is ram based and all files stored to tmpfs will be lost when the system is rebooted.
If files need to be persistent through a reboot, they should be saved to /var/tmp not /tmp.
Since the /tmp directory is intended to be world-writable, there is a risk of resource exhaustion if it is not bound to tmpfs or a separate partition.
Running out of /tmp space is a problem regardless of what kind of filesystem lies under it, but in a configuration where /tmp is not a separate file system it will essentially have the whole disk available, as the default installation only creates a single / partition. On the other hand, a RAM-based /tmp (as with tmpfs) will almost certainly be much smaller, which can lead to applications filling up the filesystem much more easily. Another alternative is to create a dedicated partition for /tmp from a separate volume or disk. One of the downsides of a disk-based dedicated partition is that it will be slower than which is RAM-based.
tmpfsRun the following command and verify the output shows that /tmp is mounted. Particular requirements pertaining to mount options are covered in ensuing sections.
# findmnt -kn /tmp
Example output:
/tmp tmpfs tmpfs rw,nosuid,nodev,noexec
Ensure that systemd will mount the /tmp partition at boot time.
# systemctl is-enabled tmp.mount
Example output:
generated
Verify output is not masked or disabled.
Note: By default, systemd will output generated if there is an entry in /etc/fstab for /tmp. This just means systemd will use the entry in /etc/fstab instead of its default unit file configuration for /tmp.
/tmp should be mounted as a separate partition.
First ensure that systemd is correctly configured to ensure that /tmp will be mounted at boot time.
# systemctl unmask tmp.mount
For specific configuration requirements of the /tmp mount for your environment, modify /etc/fstab.
Example of using tmpfs with specific mount options:
tmpfs /tmp tmpfs defaults,rw,nosuid,nodev,noexec,relatime,size=2G 0 0
Note: the size=2G is an example of setting a specific size for tmpfs.
Example of using a volume or disk with specific mount options:
<device> /tmp <fstype> defaults,nodev,nosuid,noexec 0 0
Not configured by default.
v8 - 3.3 Configure Data Access Control Lists (IG 1, IG 2, IG 3) v7 - 14.6 Protect Information through Access Control Lists (IG 1, IG 2, IG 3)
MITRE ATT&CK Mappings: T1499, T1499.001 | TA0005 | M1022