add-shape-types-to-torch-model

name

add-shape-types-to-torch-model

description

Port a PyTorch model to use pyrefly's tensor shape type system (Tensor[B, C, H, W], Dim[T]). Use this skill whenever the user wants to add shape annotations to a PyTorch model, type a model with tensor dimensions, port a model to use shape tracking, or annotate model forward methods with tensor shapes. Also use when the user mentions tensor shape ports, Dim types for PyTorch, or pyrefly shape checking on a model file. Invoke BEFORE starting any model port — the skill's gated workflow prevents common failure modes.

You are porting a PyTorch model to use pyrefly's tensor shape type system.

The methodology below is mandatory; how much you write down depends on the job. Each step has an artifact — an audit table, a per-local reveal_type dump, a typed-interface receipt, an assert_type count. Working through them in order is not optional: the next step's input is the previous step's output, and skipping a step means substituting reasoning for testing, which is the primary failure mode.

What varies is the deliverable:

• Annotating someone's own model (the common case): do every step as internal reasoning, but what you hand back is the annotated model plus a short report of what couldn't be tracked. You don't need to paste every table — the "paste this" instructions below are for the contribution case.
• Contributing a reference example (e.g. into a maintained example corpus): the tables, receipts, and counts ARE part of the deliverable — paste them in full, because others read these ports to learn the patterns. A skill that invokes this one for corpus work will say so; absent that, assume the lighter deliverable.

Before you start: two questions

Resolve these with the user before Gate 0. In the common case these are the only two times you interrupt them:

1. Confirm how you'll check, and where the stubs are. State it operationally — e.g. "I'll type-check with <command> against the shape stubs at <path>, correct?" — and let the user confirm or correct. Don't make them reason about internal concepts; just confirm a command and a location. Default the command to pyrefly check (assume pyrefly is on PATH, however it was installed) and discover where the stubs live from pyrefly dump-config, which prints the resolved search path. If a skill invoked this one, it may supply both instead (for example, an in-repo build-and-check command).
2. Ask whether they're open to changing the stubs. Adding or refining a stub signature can recover shapes an op would otherwise lose.
   • No (or unsure): don't touch the stubs. Port the model as well as the existing stubs allow, collect what couldn't be tracked, and report it at the end (see Completion report), suggesting an upstream issue for the gaps worth closing. This path is fully supported — a less-complete port is the expected outcome here, not a failure.
   • Yes: you have standing permission to make straightforward stub-signature improvements as you go. Don't re-ask per op. Still port first and confirm the gap with reveal_type before editing a stub.

Don't ask about deeper changes (teaching Pyrefly new shape logic) up front — that comes up only reactively, and rarely (see "When an op's shape is wrong").

Pre-flight

Create tasks for each gate and the module loop/verification phases that follow. Update them as you complete each stage — this gives visibility during long-running ports.

Complete these gates before writing any code.

Gate 0: Understand the system

Read shape_tracking_capabilities.md (this skill dir). It explains the three shape-tracking mechanisms (shape-aware stubs, DSL functions, special handlers) and how to check each one. You need this context to make the Gate 1 audit meaningful — knowing whether an op exists in a stub is not the same as knowing whether its shapes are tracked.

Do NOT read style_guide.md yet. It is comparison material for the verification phase. Reading it now biases you toward known patterns before you have empirically probed this model's shapes.

Gate 1: Audit ops

List every nn.Module subclass and torch/F. function called in the model. Check each against the shape-aware torch stubs (the .pyi files under the stub root you confirmed up front — pyrefly dump-config reports it) and any shape DSL declarations in those stubs. The stubs attach DSL shape functions with @uses_shape_dsl(ir_fn), and the IR functions live in _shapes.pyi next to the stubs, imported from stub files as torch._shapes because the stub package provides the torch package for type checking. This is a diagnostic pass — you are recording which ops are tracked and which aren't, not fixing anything. A gap here never blocks the port. This step should take minutes — you are scanning the stub file for the op and, only when a decorator points there, the corresponding IR function.

Do NOT delegate this audit to code search agents or use web search for this step. The torch-stubs package and its _shapes.pyi DSL file are exhaustive for torch shape support. For each op in your list, check whether it appears in the relevant stub file and whether it has a precise generic signature, Self/Tensor[*S] return, or @uses_shape_dsl(...) decorator that refines a bare declared return. Use targeted file reads or repo-approved search scoped to known files/directories, not broad recursive shell search. You need to confirm presence and spot missing attributes (e.g., bias on Conv2d), not memorize every signature.

Paste your audit table in your response before proceeding to Gate 2:

## Gate 1: Ops audit
| Op | Stub location | Shape DSL decorator / IR fn (or "no decorator") | Status |
|----|---------------|------------------------------|--------|
| nn.Conv2d | tensor-shapes/pyrefly-torch-stubs/torch-stubs/nn/__init__.pyi — generic [InC,OutC,K,S,P,D] | no decorator (stub generic) | tracked-stub |
| F.adaptive_avg_pool2d | tensor-shapes/pyrefly-torch-stubs/torch-stubs/nn/functional.pyi — bare declared return | `@uses_shape_dsl(adaptive_pool_ir)`, defined in `_shapes.pyi` | tracked-DSL |
| ...

Status is one of tracked-stub, tracked-DSL, tracked-handler (a special handler tracks it), or GAP (no shape support found).

Filling the "Shape DSL decorator / IR fn" column requires checking whether the stub declaration has a @uses_shape_dsl(...) decorator. If it does, confirm the named IR function exists in _shapes.pyi next to the stubs. Write "no decorator" only after confirming the stub declaration has no decorator — do not leave this column blank or write "check DSL".

A GAP is information, not a blocker — note it and move on. You decide what to do about gaps later: most degrade gracefully to a bare Tensor, and only if the user opted into stub changes is a GAP worth a stub fix.

Gate 2: Inventory the original

Write the inventory as a comment block at the top of the port file, using this exact format:

# ## Inventory
# - [ ] ClassName.__init__ — Dims: param1, param2; int: param3
# - [ ] ClassName.forward
# - [ ] function_name — utility, no tensors
# ...

Every class, function, and method in the original file must appear, and every item must be ported. Do not skip or exclude anything. If a class depends on a library without shape-aware stubs, port it anyway — its tensors fall back to bare Tensor, which is acceptable; record the gap for the report. Only if the user opted into stub changes, and a minimal stub for the specific ops used would recover real shapes, is adding one worthwhile.

For each class, list constructor parameters and whether each is Dim or int — this feeds Step 1 of the module loop.

Check off items as you port them ([ ] → [x]). Do not proceed to verification with unchecked items.

Transition to module loop

You have completed pre-flight. You have NOT written any model code yet.

Your analysis so far is a hypothesis. The module loop tests it empirically. If you catch yourself planning multiple modules' forwards in your head, STOP — you are substituting reasoning for testing, and reasoning is less reliable.

Write the file with imports, the inventory comment, and utility functions (no tensor shapes). Then start Step 1 for the FIRST module only.

Read porting_principles.md (this skill dir) for the mindset: why we port, priority order, and stub philosophy.

Module loop

Repeat the following for each module in dependency order. Each module's typing may inform the next — e.g., discovering that a submodule tracks shapes internally changes how the parent handles its loop.

ONE MODULE AT A TIME. Complete Steps 1–6 for module A, paste the Step 6 checklist, THEN start Step 1 for module B. If you find yourself typing two modules' constructors before running the checker, you have already entered the primary failure mode: writing the entire file and validating at the end leads to over-use of typed interfaces and under-use of assert_type.

Step 1: Inventory parameters

List every constructor parameter. For each, decide:

• Dim: the value determines a tensor dimension (flows to nn.Linear, nn.Conv2d, tensor creation, or any typed function that uses the value as a shape dimension).
• int: iteration count (n_layers, n_res_block) or boolean-like flag.

If in doubt, make it Dim. The cost is one more type param; the cost of int is permanent shape loss in everything downstream.

Critical rules:

• Every int that flows to a sub-module constructor (nn.Linear(dim, ...)) MUST be Dim. No exceptions.

• Never cast Dim to int (int(dim), self.x = int(dim)) — Dim is a subtype of int, so the cast only kills tracking. Exception: bool/float conversion is necessary, but int * Dim produces Unknown — check whether it reaches tensor shapes before fixing. Don't replace with if/else branching (union of concrete expressions is worse than one Unknown).

• Derived dims use expressions (D // NHead, 4 * ES), not independent type params. Only independent degrees of freedom get type params.

• Dimensions from list[int]. list[int] element access (e.g., hidden_units[-1]) erases the concrete value to int. Add an explicit Dim field to the config or constructor for that value.

• Use nn.Buffer and nn.Parameter, not register_buffer/ register_parameter.

• Bridge dims. When part of the model is untracked (e.g., features built via nn.Sequential(*list)), look for dimensions that connect the untracked section to tracked downstream modules. For example, if features output feeds a Linear classifier, the Linear's in_features is a bridge dim — making it a class type param enables annotation fallback to recover a shaped type (e.g., Tensor[B, LastC]) that then flows naturally through downstream ops. Without it, annotation fallback can only recover bare Tensor or batch-only shapes.

  class Model[NC, LC](nn.Module):
      def __init__(self, num_classes: Dim[NC] = 1000,
                   last_channel: Dim[LC] = 1280):
          ...
          self.classifier = nn.Linear(last_channel, num_classes)
  

  Here LC bridges the untracked feature extractor to the typed classifier, recovering Tensor[B, NC] at the output.

• Dim[X] | None for optional dimensions. When a parameter is Optional[int] but flows to tensor shapes when present, type it as Dim[X] | None, not Optional[int]. Example: rank_k: Optional[int] → rank_k: Dim[RK] | None. In the forward method, narrow with if rank_k is not None: — the checker then treats rank_k as Dim[RK] inside the branch. Leaving it as Optional[int] permanently loses tracking in every downstream op.

• Parameterized config dataclasses. When multiple modules consume dimensions from the same @dataclass config, note it — Step 2 shows how to parameterize the config so dims propagate across module boundaries.

• Lazy-initialized buffer attributes. An attribute's type is fixed at the declaration, not at later assignments. Declaring self.x: Tensor | None = None and assigning a real tensor in a setup hook (e.g., setup_caches) loses the shape forever — every read site sees Tensor | None, and the best you get after a None check is bare Tensor. If the field is always assigned before first use, initialize it eagerly in __init__ with the real shape:

  # Bad: causal_mask is Tensor | None everywhere; shape is lost
  class Attention(nn.Module):
      def __init__(self, ...):
          self.causal_mask: Tensor | None = None
      def setup_caches(self, max_seq_len: int):
          self.causal_mask = torch.tril(
              torch.ones(max_seq_len, max_seq_len)
          )
  
  # Good: causal_mask is Tensor[MS, MS] from declaration
  class Attention[MS](nn.Module):
      def __init__(self, max_seq_len: Dim[MS], ...):
          self.causal_mask: Tensor[MS, MS] = torch.zeros(
              max_seq_len, max_seq_len
          )
  

  Reserve Tensor | None for fields that may genuinely never be set. If late init is unavoidable because the shape depends on a runtime decision, accept that bare Tensor post-narrow is the right answer and document it as a Step 4 receipt.

Step 2: Type the constructor

Write __init__ with the Dim params from Step 1. Construct sub-modules using those Dims — they get typed automatically.

Default values for Dim params: Literal[0] is not assignable to Dim[X] as a default. Use PEP 696 type-parameter defaults instead:

# Won't work — Literal[1000] not assignable to Dim[NC]:
def __init__(self, num_classes: Dim[NC] = 1000): ...

# Works — NC defaults to 1000 at the type level:
class Model[NC = 1000](nn.Module):
    def __init__(self, num_classes: Dim[NC] = 1000): ...

Constructor patterns that break shape tracking:

• nn.Sequential(*list_var) erases module types — the Sequential returns bare Tensor. Only nn.Sequential(M1(), M2(), M3()) with direct arguments is tracked. Extract shape-changing modules (Linear, Conv2d) as individual attributes and chain in forward.
• Factory functions returning nn.Sequential erase all type parameters at the function boundary. Use a class with a typed forward method instead.
• getattr(nn, name)() returns Any. Replace with a union of typed nn.Module subclass types.
• Method-level type params on class fields. If a method creates shaped tensors assigned to self.field, the field can't carry the method's type params — it reverts to bare Tensor. Move creation to __init__ so type params become class-level.

Parameterized config dataclasses. When a @dataclass holds dimension hyperparameters consumed by multiple modules, make it generic so dims propagate through constructors:

@dataclass
class Config[D, NHead, VocabSize]:
    dim: Dim[D]
    n_head: Dim[NHead]
    vocab_size: Dim[VocabSize]
    dropout: float = 0.0

Modules extract only the params they need using Any for the rest:

class MLP[D](nn.Module):
    def __init__(self, config: Config[D, Any, Any]):
        super().__init__()
        self.fc = nn.Linear(config.dim, 4 * config.dim)

Without this, each module must independently accept and thread every dim through its constructor — error-prone and verbose.

If the original config had default values (e.g., dim: int = 768), combine the two patterns above — give the dataclass type params PEP 696 defaults so callers can omit dims:

@dataclass
class Config[D = 768, NHead = 12, VocabSize = 50257]:
    dim: Dim[D] = 768
    n_head: Dim[NHead] = 12
    vocab_size: Dim[VocabSize] = 50257
    dropout: float = 0.0

Now Config() produces Config[768, 12, 50257] and Config(dim=1024) produces Config[1024, 12, 50257] — dims propagate even when callers don't pass every parameter.

DO NOT write the forward method yet. The forward signature and assert_type expressions depend on what the checker infers, which you don't know until Step 3.

Run the checker to verify the constructor compiles. Paste the checker output (0 errors, or the errors you need to fix) before proceeding.

Step 3: Probe the forward

First, count the local variables in the forward method — every assignment to a name (e.g., x = ..., out = ..., result = ...) is a local. Write them down.

Then add reveal_type on EVERY local variable. Run the checker.

Paste the results in your response using this exact format. Step 4 takes this table as input — if you don't have it, you cannot proceed.

# reveal_type results for ClassName.forward:
# Locals: N (list them: var1, var2, var3)
# var1 (line N): Tensor[B, C, H, W]  → SHAPED
# var2 (line M): Tensor               → BARE — investigate in Step 4
# var3 (line P): Tensor[B, D]         → SHAPED

Verify: does the number of reveal_type entries match the local count? If not, you missed some — go back and add them.

If a reveal_type result contradicts your understanding of the op (e.g., spatial dims unchanged after a strided conv, or a shaped op returning bare), write a small isolating test, run the checker, and confirm the behavior before proceeding. Either your understanding is wrong (update your mental model) or the checker has a simplification you should document.

This table is your Step 4 input. Do not write assert_type until Step 4 is complete for every BARE entry. The results tell you:

• Shaped type → the checker tracks this op. Write assert_type in Step 5.
• Bare Tensor → shape lost. Investigate in Step 4 before deciding.

Step 4: Restructure for tracking

Many patterns that LOOK dynamic have trackable substructure. Conditional branching over matmul/bmm chains, for example, is fully trackable if the dimension values are Dim-typed.

For EACH bare Tensor from Step 3, attempt ALL applicable restructurings before falling back to typed interface:

□ int() or round() wrapping a Dim value? Remove it. If the argument is already int-compatible (e.g., round() on an integer expand_ratio), the wrapper is a no-op that kills tracking.

□ nn.Sequential(*list_var)? Extract shape-changing modules (Linear, Conv2d, etc.) as individual attributes and chain them in forward. Shape-preserving modules (activations, norms, dropout) can remain grouped since their output shape equals their input. Note: this applies to nn.Sequential(*list_variable) where the modules come from a list. nn.Sequential(M1(), M2(), M3()) with direct arguments IS tracked — don't restructure it.

□ nn.Sequential subclass? The special handler tracks shapes when a Sequential is CALLED as an attribute (self.net(x)), but NOT when forward is inherited from a Sequential base class. Convert subclasses to composition: replace class Foo(nn.Sequential) / super().__init__(m1, m2, m3) with class Foo(nn.Module) / self.net = nn.Sequential(m1, m2, m3) and delegate forward to self.net(x). This is the minimal change for full shape tracking.

□ list[...] where tuple[...] is needed? torch.cat([a, b]) homogenizes element types. Use torch.cat((a, b)). Same for .split([d, k, k]) → .split((d, k, k)).

□ Branch join widening? If the first iteration changes shape but subsequent iterations preserve it, separate the first iteration: x = layers[0](input) then loop over layers[1:]. The dual works too: separate the last iteration if only the final output matters.

□ Loop over ModuleList widens tensor type? Same fix as branch join: separate the shape-changing iteration from shape-preserving ones.

□ Tensor accumulation for stack/cat? Type the list with the element shape, then annotate the stack/cat result with the full shape including the new dimension (the DSL can't infer collection size from a dynamic loop).

□ Inlined expressions? f(g(x)) sometimes loses shapes that y = g(x); f(y) preserves. Break into separate assignments.

□ Op genuinely missing from the stubs? Confirm it's absent (check the stubs and any @uses_shape_dsl(...) IR function they reference). A missing shape is not a blocker — it degrades to a bare Tensor that you document below. If the user opted into stub changes and a refined signature would recover the shape, that's a fair fix. If instead Pyrefly computes a wrong shape, see "When an op's shape is wrong".

□ About to claim an op is untracked? Check the shape-aware stubs, their @uses_shape_dsl(...) decorators and IR functions, and special handlers first. The system tracks reshape, flatten, permute, transpose, cat, stack, matmul, arange, zeros, outer, interpolate, einsum, and many more.

After EACH restructuring, re-run reveal_type and update your records.

STOP before using typed interface. For each bare variable where you want typed interface, paste this filled-out receipt in your response:

## Typed interface receipt [<Module>.<var>]: <variable> in <ClassName.forward>
- int()/round() cast: [removed / not applicable — reason]
- Sequential(*list): [restructured / not applicable — reason]
- list→tuple: [not applicable — reason]
- Branch join: [not applicable — reason]
- Inlined expressions: [split / not applicable — reason]
- Missing stub/DSL: [checked stubs + `@uses_shape_dsl` IR — reason]
- Dim | None reclassification: [reclassified param X / not applicable — reason]
- Bridge dim: [promoted X to class Dim / not applicable — reason]
- Config parameterization: [parameterized Config[...] / not applicable — reason]
Result: still bare after all checks. Using typed interface because ___.

If you cannot fill this out, you have not completed Step 4. Go back.

"Restructure" usually means a 2–3 line change: separating an iteration, removing an int() cast, or adding a Dim type param. It does NOT mean rewriting the algorithm. If you find yourself writing significantly different logic, you've gone too far. Even partial dim tracking (e.g., output dim only) is far more useful than none.

type: ignore categories. Before writing type: ignore, identify which category applies:

• A1 algebraic gap (N * (X // N) ≠ X): no fix, use type: ignore.
• Conditional equality (e.g., Inp == Oup at runtime but separate type params): no fix, use type: ignore.
• Stub gap (op missing, or its signature too loose to track): if the user opted into stub changes, refining the stub signature is the fix; otherwise document the bare result and move on. A wrong computed shape is a different case — see "When an op's shape is wrong".
• return-value mismatch from untracked sub-section: don't type: ignore. The fix is upstream — find the bridge dim connecting the untracked section (e.g., nn.Sequential(*list) features) to the tracked downstream input (e.g., a classifier Linear), promote it to a class type param per Step 1's bridge-dim rule, then use annotation fallback to recover the shaped return.
• Branch join: try restructuring first.

When an op's shape is wrong. Everything above handles a missing shape (the op falls back to bare Tensor) — that always degrades gracefully and never blocks. The rare hard case is a wrong shape: Pyrefly computes a concrete shape that is incorrect (e.g. integer floor-division where the real op rounds up). You cannot annotate around this — the checker actively disagrees with reality. When it happens, tell the user; fixing it means teaching Pyrefly new shape logic, not editing a stub signature. If a shape-DSL skill (e.g. modify-shaped-array-dsl) is available, hand off to it; otherwise file an upstream issue describing the op and the correct rule, and document the spot with type: ignore for now. Don't reach for this on ordinary bare-Tensor gaps — only when a computed shape is provably wrong.

Bare Tensor where you know the shape? Use assert_type to verify inference, not annotation fallback. Annotation fallback silently accepts bare Tensor — it doesn't prove tracking works. If the checker can't infer the shape, trace upstream to find where shapes were actually lost.

Step 5: Write forward and assert_type

Annotation hierarchy (most to least desirable):

1. assert_type — verifies the checker's inference. Proves the system works, not just that you annotated correctly.
2. Annotation fallback — x: Tensor[B, C, H, W] = unrefined_op(...). Use when the op returns unrefined but you know the shape. Document WHY.
3. type: ignore — the checker produces a WRONG type (algebraic gap or conditional equality). Last resort. Always include a comment explaining the specific gap.
4. Bare Tensor — shape genuinely unknowable. Data-dependent token counts, conditional accumulation. Document the specific reason.

Type the forward signature:

• Class params for fixed dims (set at construction), method params for per-call dims (batch size, sequence length, spatial dims).
• Put parameters whose type vars appear in bare (directly bindable) positions BEFORE parameters where they appear inside arithmetic expressions. The checker needs to bind the bare params first.
• Don't hide known class dims inside variadic params. If the module has a class-level Dim D, use Tensor[*Bs, D] not Tensor[*S].

Replace every reveal_type with assert_type using the recorded types:

• Shaped reveal_type → assert_type(x, Tensor[...]) with that shape.
• Bare reveal_type → assert_type(x, Tensor) to document the tracking gap, plus a comment noting the root cause (e.g., # Sequential(*list)).

Every local variable in every forward method gets an assert_type. No exceptions — even inside typed-interface modules. Typed interface means the boundary is typed — it does NOT mean internals are exempt from assert_type. If you think a shape expression is "too complex to write," you are guessing — look at what reveal_type showed you. The checker simplifies aggressively.

Run the checker. Fix any assert_type failures.

VERIFY before leaving Step 5. Paste this in your response:

# assert_type count for ClassName.forward:
# Locals: var1, var2, var3 (N total)
# assert_type calls: N
# Match: yes

If the counts don't match, you missed some. Go back and add them.

Step 4 receipt check. Every bare assert_type(x, Tensor) and every annotation fallback (x: Tensor[B, C] = untracked_op(...)) must cite the Step 4 receipt that justifies it. If no receipt exists, go back to Step 4 — the restructuring attempt was skipped.

# Bare/fallback assert_types and their Step 4 receipts:
# - var2 (bare): receipt MLP.var2 — Sequential(*list), not restructurable
# - var3 (fallback): receipt MLP.var3 — stub returns unrefined, shape known from context
# - var5 (bare): receipt MLP.var5 — input is bare (upstream contagion)

Smoke tests at the bottom of the file must use assert_type on the typed output, not assert out.shape == (...). Runtime shape asserts don't exercise pyrefly — they only prove the model runs. Example:

model = MyModel(num_classes=10)
x = torch.randn(2, 3, 32, 32)  # inferred as Tensor[2, 3, 32, 32]
out = model(x)
assert_type(out, Tensor[2, 10])  # not: assert out.shape == (2, 10)

Step 6: Post-module checklist

Copy this template into your response and fill every line before proceeding to the next module.

### Post-module: <ClassName>
- type: ignore count: ___
  For each: [line] [category: A1 / conditional / stub-gap] [fix attempted]
- Step 4 receipts: [list receipt IDs, or "none — all locals shaped"]
- int params: [list each int param and why it's not Dim, or "none"]
- int() casts: [list each, or "none"]
- Sequential(*list): [list each instance and what you did, or "none"]
- bare Tensor in sigs: [list each with reason, or "none"]
- assert_type: ___ checkpoints covering ___ locals in ___ forward methods
- missing stubs: [list each, or "none"]

Do not proceed to the next module with unfilled lines.

Verification (draft review)

Everything above produced a DRAFT. This phase reviews it.

Run verify_port.sh

Run verify_port.sh (in this skill dir) on your port file:

tensor-shapes/skills/add-shape-types-to-torch-model/verify_port.sh <path/to/your/port.py>

Paste the FULL output in your response. Do not summarize or paraphrase — the raw output is the artifact.

Run the actual Pyrefly check

verify_port.sh is a heuristic quality gate; it does not type check the port. You must also run Pyrefly itself against your port file, with tensor shapes enabled (--tensor-shapes true) and the shape stubs on the search path. By default this is pyrefly check — the stubs may already be on the path if they're installed in your environment, otherwise add the stub root reported by pyrefly dump-config to the search path. If a skill invoked this one, it may supply a different command (for example, an in-repo build-and-check invocation); use that instead.

Paste the Pyrefly output. The result must be 0 errors; reveal_type info is acceptable only while probing and must not remain in the finished port.

Investigate each warning

For EACH warning in the verify_port.sh output, write one of:

• Fixed: what you changed and why.
• Accepted: why this warning is not actionable (cite the specific category — A1 algebraic, conditional equality, stub gap not worth fixing, etc.).

Do not write "all warnings audited" — list them individually.

Audit bare assert_types

The port's quality metric is: what fraction of assert_type calls verify a shaped type vs. document a bare Tensor gap? Every bare assert_type(x, Tensor) is a tracking gap. Minimizing these is the goal.

For each assert_type(x, Tensor) in the port (bare, no shape params):

1. It MUST have a comment explaining the root cause (e.g., # Sequential(*list), # input is bare).
2. The root cause MUST have a typed interface receipt from Step 4 (or trace to one — e.g., "input is bare" because the caller's Sequential(*list) was documented in the parent module's receipt).

If any bare assert_type lacks a comment or receipt trail, go back and either fix the tracking gap or document it properly.

Paste the bare audit in your response:

## Bare assert_type audit
Total assert_type in forward bodies: ___
Shaped (assert_type(x, Tensor[...])): ___
Bare (assert_type(x, Tensor)): ___
Bare fraction: ___

Each bare:
- line N: var — root cause (receipt: <module>.Step4)
- line M: var — root cause (receipt: <module>.Step4)

Compare against known patterns

Read style_guide.md NOW — not earlier. It is comparison material for your draft, not preparation material. Reading it during pre-flight biases you toward patterns you haven't empirically verified.

For each module in your port, find the closest matching pattern in the style guide. Paste a comparison:

## Style guide comparison
| Module | My approach | Closest style guide pattern | Could I improve? |
|--------|------------|---------------------------|-----------------|
| ... | ... | ... | yes/no — reason |

If any row says "yes", go back and try the improvement before proceeding. If it doesn't work, document why in the row.

Re-run verify_port.sh

If you made any changes during this phase, re-run the script and paste the new output. If no changes were made, write "No changes — output unchanged."

Re-check callers. If you changed a module's forward signature or return type during this phase, re-run reveal_type in every module that calls it and update their assert_type expectations. A fix to module X can change the inferred types in module Y's forward body.

Completion report

Before reporting the port as done, copy and fill this template in your response. Do not report completion with unfilled blanks.

## Port complete: <model name>
Gate 1 ops audited: ___. Stubs added/fixed: ___.
Gate 2 inventory items: ___. All checked off: yes/no.
Modules ported (dependency order): ___
Step 6 checklists filled for each: yes/no
type: ignore total: ___
  ___ A1 algebraic, ___ conditional equality, ___ stub gap, ___ other
assert_type total: ___ (___ shaped, ___ bare)
Bare fraction: ___%
Each bare assert_type has comment + receipt trail: yes/no
smoke tests: ___ — all use `assert_type` on typed output (not `.shape ==`): yes/no

Verification phase:
- verify_port.sh warnings: ___
  Fixed: ___. Accepted: ___ (each justified above).
- Pyrefly check: 0 errors: yes/no
- Style guide comparison rows: ___
  Improvements attempted: ___. Improvements that worked: ___.
- verify_port.sh re-run (if changes made): 0 actionable: yes/no

Gaps & proposed improvements (for the user):
- Ops that stayed untracked, and why: ___ (or "none")
- Stub-signature improvements that would recover shapes (if stubs weren't
  changed): ___ (or "none")
- Wrong computed shapes found (needing a shape-DSL change): ___ (or "none")
- Suggest filing an upstream issue for: ___ (or "none")

The "Gaps & proposed improvements" block is the user-facing payload of the lighter deliverable — when you didn't paste the full tables, this is where the shortcomings of the port surface. Fill it from the GAPs you recorded in Gate 1 and the Step 4 receipts.

Import convention

The shape_extensions package bridges pyrefly's type system and Python runtime. Importing it patches torch.Tensor, nn.Conv2d, and other torch classes to accept subscript syntax (e.g., Tensor[B, C, H, W]) at runtime without crashing. It also provides TypeVar with arithmetic support (N + 1, N // 2 return self instead of TypeError) and Dim for binding runtime ints to type-level symbols.

shape_extensions is installed alongside the shape-aware torch stubs (wherever those live in your environment — pyrefly dump-config reports the location). In an fbsource Buck checkout specifically, the runtime package is fbcode//pyrefly/tensor-shapes/pyrefly-shape-extensions:shape_extensions, the importable stub package is fbcode//pyrefly/tensor-shapes/pyrefly-torch-stubs:torch-stubs, and the filegroup to pass as a Pyrefly --search-path is fbcode//pyrefly/tensor-shapes:torch-stubs-search-path.

Type-checking only (recommended for ports): guard imports so annotations are invisible at runtime:

from typing import assert_type, TYPE_CHECKING

import torch
import torch.nn as nn

if TYPE_CHECKING:
    from torch import Tensor
    from shape_extensions import Dim

Runtime-compatible annotations: if you need annotations to evaluate at runtime (e.g., for runtime shape validation), import shape_extensions directly (not under TYPE_CHECKING). Use old-style shape_extensions.SymVar instead of PEP 695 syntax, since class Foo[T] doesn't support arithmetic on T at runtime. Alternatively, from __future__ import annotations defers evaluation so annotations never execute, but then assert_type becomes a no-op at runtime.