flow-next-opencode-ralph-init
Scaffold repo-local Ralph autonomous harness under scripts/ralph/. Use when user runs /flow-next:ralph-init.
소스 정보
- 저장소
- gmickel/flow-next-opencode
- 최근 소스 활동
- 2026년 1월 23일 12:37
- 감지된 SKILL.md 언어
- 영어
- 스타
- 40
- 포크
- 0
설치 방법
기본적으로 소스를 먼저 확인하는 Prompt가 선택됩니다. 직접 명령으로 전환하거나 로컬 사본을 다운로드할 수도 있습니다.
소스 파일 검토
설치 여부를 결정하기 전에 SKILL.md와 SkillsMP에 표시된 보조 파일을 읽어 보세요.
파일 탐색기
8 개 파일SKILL.md 표시 중
SKILL.md
소스 지침 · 읽기 전용 미리보기- name
- flow-next-opencode-ralph-init
- description
- Scaffold repo-local Ralph autonomous harness under scripts/ralph/. Use when user runs /flow-next:ralph-init.
# Ralph init
Scaffold repo-local Ralph harness. Opt-in only.
## Rules
- Only create/update `scripts/ralph/` in the current repo.
- If `scripts/ralph/` already exists, offer to update (preserves config.env).
- Copy templates from `.opencode/skill/flow-next-opencode-ralph-init/templates/` into `scripts/ralph/`.
- Copy `flowctl` and `flowctl.py` from `$OPENCODE_DIR/bin/` into `scripts/ralph/`.
- Set executable bit on `scripts/ralph/ralph.sh`, `scripts/ralph/ralph_once.sh`, and `scripts/ralph/flowctl`.
## Workflow
1. Resolve repo root and OpenCode dir:
```bash
ROOT="$(git rev-parse --show-toplevel)"
OPENCODE_DIR="$ROOT/.opencode"
TEMPLATE_DIR="$ROOT/.opencode/skill/flow-next-opencode-ralph-init/templates"
```
2. Check if `scripts/ralph/` exists:
- If exists: ask "Update existing Ralph setup? (preserves config.env and runs/) [y/n]"
- If no: stop
- If yes: set UPDATE_MODE=1
- If not exists: set UPDATE_MODE=0
3. Detect available review backends (skip if UPDATE_MODE=1):
```bash
HAVE_RP=0;
if command -v rp-cli >/dev/null 2>&1; then
HAVE_RP=1;
elif [[ -x /opt/homebrew/bin/rp-cli || -x /usr/local/bin/rp-cli ]]; then
HAVE_RP=1;
fi
```
4. Determine review backend (skip if UPDATE_MODE=1):
- If rp-cli available, ask user:
```
Which review backend?
a) OpenCode (GPT‑5.2 High)
b) RepoPrompt (macOS, visual builder)
(Reply: "a", "opencode", "b", "rp", or just tell me)
```
Wait for response. Default if empty/ambiguous: `opencode`
- If only rp-cli available and user chooses rp: use `rp`
- Otherwise: use `opencode`
- If neither available and user requests none: use `none`
5. Copy files using bash (MUST use cp, NOT Write tool):
**If UPDATE_MODE=1 (updating):**
```bash
# Backup config.env
cp scripts/ralph/config.env /tmp/ralph-config-backup.env
# Update templates (preserves runs/)
cp "$TEMPLATE_DIR/ralph.sh" scripts/ralph/
cp "$TEMPLATE_DIR/ralph_once.sh" scripts/ralph/
cp "$TEMPLATE_DIR/prompt_plan.md" scripts/ralph/
cp "$TEMPLATE_DIR/prompt_work.md" scripts/ralph/
cp "$TEMPLATE_DIR/watch-filter.py" scripts/ralph/
cp "$OPENCODE_DIR/bin/flowctl" "$OPENCODE_DIR/bin/flowctl.py" scripts/ralph/
chmod +x scripts/ralph/ralph.sh scripts/ralph/ralph_once.sh scripts/ralph/flowctl
# Restore config.env
cp /tmp/ralph-config-backup.env scripts/ralph/config.env
```
**If UPDATE_MODE=0 (fresh install):**
```bash
mkdir -p scripts/ralph/runs
cp -R "$TEMPLATE_DIR/." scripts/ralph/
cp "$OPENCODE_DIR/bin/flowctl" "$OPENCODE_DIR/bin/flowctl.py" scripts/ralph/
chmod +x scripts/ralph/ralph.sh scripts/ralph/ralph_once.sh scripts/ralph/flowctl
```
Note: `cp -R templates/.` copies all files including dotfiles (.gitignore).
6. Edit `scripts/ralph/config.env` to set the chosen review backend (skip if UPDATE_MODE=1):
- Replace `{{PLAN_REVIEW}}` with `<chosen>`
- Replace `{{WORK_REVIEW}}` with `<chosen>`
7. Print next steps (run from terminal, NOT inside OpenCode):
**If UPDATE_MODE=1:**
```
Ralph updated! Your config.env was preserved.
Run from terminal:
- ./scripts/ralph/ralph_once.sh (one iteration, observe)
- ./scripts/ralph/ralph.sh (full loop, AFK)
```
**If UPDATE_MODE=0:**
```
Ralph initialized!
Next steps (run from terminal, NOT inside OpenCode):
- Edit scripts/ralph/config.env to customize settings
- ./scripts/ralph/ralph_once.sh (one iteration, observe)
- ./scripts/ralph/ralph.sh (full loop, AFK)
- Uninstall: rm -rf scripts/ralph/
```
GitHub에서 보기