publish-inspiration

name	publish-inspiration
description	Publish a clean, shareable snapshot of the apps/features this mind built to a new GitHub repo (an "inspiration" another mind can adapt). Use when the user asks to publish, share, or export what they built as a reusable template.

Publish an inspiration

An "inspiration" is a clean, shareable, bootable snapshot of the apps and features this mind built, published to a new GitHub repo so another mind can be created FROM it (not just read its app code). One repo can accumulate several inspirations (one manifest + thumbnail per inspiration, all at the repo root). This skill delegates the assembly to a launch-task sub-agent worker (which builds the snapshot, finishes the manifest, and designs the thumbnail in its own git worktree), confirms the publish with the user in chat, obtains GitHub access via latchkey permissioning (never the gh CLI), and then creates the repo and pushes -- directly from the worker's worktree.

CWD INVARIANT -- read this before running anything in §§6-8. From the moment §3's worker reports done, the live mind's checkout at /code is DONE being touched for the rest of this skill. Every command in §6 (chat confirmation and any confirmed manifest/thumbnail edits), §7 (GitHub auth), and §8 (create repo + push) runs with cwd = $WT (the worker's worktree), NEVER /code. There is no merge-back step: $WT's tree, built by build_inspiration.sh on top of BASE_REF and finished by the worker, IS the tree that gets pushed, as-is, by you, from $WT. In particular, IGNORE lead-proxy.md's default done -> merge the worker's branch handling for this flow -- /code's branch and working tree are never modified, merged into, or pushed from. This is the single most important invariant in this skill: a prior version of this skill merged the assembly branch into /code's current branch before pushing, which one time silently reset /code's entire live tree to an old base (a normal 3-way merge diffs from the merge-base, and the assembled tree looks nothing like /code's HEAD, so git read everything present in HEAD but absent from the old base as an intentional deletion -- 1400+ files gone from a live mind). Do not reintroduce a merge, a git checkout mngr/<slug> in /code, or any other step that runs from /code after assembly.

AN INSPIRATION MUST BE BOOTABLE -- NEVER PUBLISH A PARTIAL SNAPSHOT. A valid inspiration is always the FULL tree build_inspiration.sh assembles on mngr/<slug>: the clean FCT base (pyproject.toml, supervisord.conf, .mngr/, .agents/skills/ including the generated inspiration /welcome, parent.toml, etc.) plus the selected app/feature paths -- never just the app code plus a README. That full tree is what makes /use-inspiration's template path work: another mind must be creatable FROM the published repo, not merely able to read its source. If assembly (§3), the chat confirmation or GitHub auth (§6-§7), or the push (§8) fails for ANY reason, do NOT invent an alternate publish mechanism -- do not push a hand-assembled subset of files via gh api, a plain git init of just the app directory, or any other ad-hoc path outside this skill's documented flow. A non-bootable "inspiration" silently defeats the whole feature and is strictly worse than no publish at all. Instead: diagnose and fix the actual blocker (e.g. re-resolve BASE_REF per §2, relaunch the worker, pick a different repo name) and retry the documented flow from the failed step, or STOP and clearly tell the user what failed, why, and that you did not publish -- never silently redefine what "publishing an inspiration" means.

Shared conventions

• Slug derivation. slug = the user's title lowercased, with each run of characters outside [A-Za-z0-9._-] collapsed to a single -, and leading / trailing - stripped. The result MUST match ^[A-Za-z0-9._-]+$ and MUST NOT start with - (build_inspiration.sh re-validates). repo_name defaults to slug; the user may override it in the chat confirmation (§6) -- validate any override against the same pattern yourself. The same slug names the manifest (inspiration-<slug>.md), the thumbnail (inspiration-<slug>.svg), the assembly worker, and the worker's branch (mngr/<slug>).
• $WT -- the worker's worktree. mngr create places worker worktrees under /mngr/worktree/<name>-<uuid>/ (the worktree_base_folder in .mngr/settings.toml; the <uuid> suffix is random), so the path cannot be guessed -- resolve it after the worker's done report per §3. Everything after assembly runs with cwd = $WT (see the callout above).
• BASE_REF (provenance + clean base). The workspace's creation snapshot -- the template state this mind started from (or last updated itself to). Resolve it in-repo, with no network access (see step 2); do NOT git fetch/git pull upstream. Pass it to build_inspiration.sh as --base-ref.

1. Setup Q&A and the scope gate (live in chat)

Ask the user, in plain language. Never enumerate files at them:

• which apps or features they want to include (you translate this into a set of repo-root-relative include paths, e.g. apps/slack-inbox, libs/slack_inbox, plus their service wiring -- you reason about the backing paths, the user does not);
• whether any data should be included. Default: NO user data. Include data paths only if the user explicitly asks for them;
• whether anything should be changed, removed, or generalized in the published version only -- hardcoded personal preferences, account or channel names, anything they'd rather not ship. Their live files stay untouched; the edits land only in the snapshot (see the modifications step in §3);
• a name for the inspiration (propose one yourself; it becomes the title, and the slug derives from it -- naming is cheap to change later, so it never needs to hold up the gate below).

Derive slug and repo_name from the title. Resolve the concrete set of include paths yourself.

The scope gate: confirm BEFORE any assembly work -- before treating the include set as final, and before dispatching the worker (§3). This is a hard gate. Send ONE message that lays out, in plain language:

• what WILL be included (apps/features, not file lists);
• what will NOT be included that they might expect (their data, other apps this mind has, secrets/config) -- so surprises surface now;
• the published-version modifications you will apply (or "none");
• the proposed title and repo name, marked as adjustable later;
• the default private visibility.

Then STOP your turn and WAIT for the user's reply. The go-ahead must be an explicit answer to THIS message -- the user's original "publish this" request is NOT it, however specific it was. Never announce anything as "confirmed" that the user has not themselves replied to: confirmation is something the user gives, not something you declare. (A real publish run declared "include set confirmed" and dispatched the worker in the same turn as its own proposal; this gate exists to prevent exactly that.)

A rename NEVER requires tearing down or relaunching the worker. The worker's own name and its branch name are internal plumbing -- they appear nowhere in the published repo (§8 mints a single snapshot commit from the final tree and pushes that commit, never the branch), so a stale name there is irrelevant. If the user renames after dispatch anyway, handle it in place:

• Renamed before the worker has run the script: just pass the new --slug/--title to build_inspiration.sh.
• Renamed after the script has run (worker mid-run or done): rename in place -- git mv the manifest and thumbnail to the new slug names, update the front-matter title: and the generated welcome's slug references, commit (in the worker's worktree). This preserves any FILL-IN prose and bespoke SVG already done. Do NOT re-run the script under a new slug in an already-assembled worktree: its carry-forward step would keep the old-slug files as if they were an accumulated earlier inspiration. A display-title-only change is just the front-matter edit.

2. Resolve BASE_REF (in-repo, no network)

BASE_REF is this workspace's creation snapshot -- the template state the mind started from (or last updated itself to). Resolve it deterministically as the NEWEST first-parent commit that is a template-state marker:

BASE_REF=$(git log --first-parent --format='%H %s' HEAD \
    | awk '{h=$1; sub(/^[^ ]+ /,""); if ($0 ~ /^update-self:/ || $0 == "Initial workspace commit") {print h; exit}}')

Two marker kinds; the newest one on the first-parent chain wins:

• update-self: ... -- the mind pulled a newer template version after creation (the same subject convention update-self / assist rely on).
• Initial workspace commit -- written by bootstrap on the mind's very first boot (always present -- it is created --allow-empty by libs/bootstrap -- and it snapshots exactly what the workspace started from, including any uncommitted source state a dev-flow clone carried). This is the normal answer for a mind that never ran update-self.

This is NOT a judgment call -- do not go hunting for an older "clean template" commit past the marker. A full-history clone's first-parent ancestry reaches ancient template commits that have nothing to do with this mind; the marker is the mind's actual base.

Fallback (only if NO marker exists -- a hand-made or pre-bootstrap repo): the first-parent root:

git rev-list --first-parent HEAD | tail -1

The fallback MUST be the first-parent root, never a bare root-commit lookup (git rev-list --max-parents=0 HEAD): subtree merges add parallel root commits that are NOT the seed (a mind repo can have several near-empty roots), while the first-parent chain from HEAD always ends at the true template seed. Do NOT fetch or pull from upstream to obtain BASE_REF in any case -- parent.toml is a provenance link only.

Mandatory pre-check (before ANY assembly). Verify the resolved base is a bootable template -- its tree must name both pyproject.toml and supervisord.conf:

git ls-tree --name-only "<BASE_REF>^{tree}" | grep -qx pyproject.toml \
  && git ls-tree --name-only "<BASE_REF>^{tree}" | grep -qx supervisord.conf

If the check fails, STOP and reconsider the base (e.g. walk forward along the first-parent chain to the earliest commit that passes both checks, or ask the user) rather than launching the worker -- this catches the wrong-root and too-old-base problems in seconds instead of a full worker round-trip. build_inspiration.sh re-validates both conditions itself and exits 5 with a clear message (see §5), but that is a backstop, not a substitute for the pre-check.

3. Delegate assembly to a launch-task worker

Do NOT dispatch until the user has explicitly replied to §1's scope-gate message confirming what goes in, what stays out, and the published-version modifications. If a rename arrives after dispatch anyway, fix it in place per §1 -- never tear down or relaunch the worker for a rename (its name and branch are internal and appear nowhere in the published repo).

Assembly runs in a launch-task sub-agent worker. The worker gets a fresh git worktree on branch mngr/<slug>, runs build_inspiration.sh there, then -- in the SAME run, no second round-trip -- fleshes out every manifest FILL-IN block and designs the bespoke thumbnail. /code is never modified.

The worker name is <slug>. Names must be unique: if a previous attempt left a worker or branch with this name, clean it up first (uv run .agents/skills/launch-task/scripts/create_worker.py destroy --name <slug>, then git branch -D "mngr/<slug>" once no worktree holds it).

Per launch-task, the whole delegation is ONE step in your timeline:

tk create --step "Delegate assembling the shareable inspiration snapshot to a sub-agent"
# -> Created cod-step-XXXX: ...
tk start cod-step-XXXX

Write the task file. Substitute the real <slug>, <title>, <description>, <BASE_REF>, the include paths, and the user-confirmed published-version modifications list (from §1's scope gate; write "None requested." if there are none) into the body -- the worker must be able to run the script verbatim, with zero back-and-forth:

mkdir -p runtime/launch-task/<slug>
{
cat << FRONTMATTER_EOF
---
lead_agent: $MNGR_AGENT_NAME
finish_report_path: runtime/launch-task/<slug>/reports/report.md
---
FRONTMATTER_EOF
cat << 'BODY_EOF'

# Task: Assemble the "<title>" inspiration snapshot

## What to do

Assemble a clean, bootable "inspiration" snapshot on your worktree's branch,
then finish its manifest and thumbnail. Do ALL of it in this one run.

**Before anything else**, extract `LEAD_AGENT` / `FINISH_REPORT_PATH` per
`.agents/shared/references/worker-reporting.md`: step 1's script resets your
worktree to a clean template base and deletes gitignored state -- including
`runtime/` and this task file -- so parse the frontmatter FIRST.

1. **Run the assembly script** from your worktree root, verbatim (every value
   below was already resolved by the lead):

   ```bash
   bash .agents/skills/publish-inspiration/scripts/build_inspiration.sh \
       --base-ref <BASE_REF> \
       --slug <slug> \
       --title "<title>" \
       --description "<description>" \
       --include <path> [--include <path> ...] \
       [--data-include <path> ...]
   ```

   On ANY non-zero exit: nothing was committed; go straight to "Reporting
   back" with a `stuck` report that quotes the script's stderr verbatim (the
   exit code maps to a specific guard rail the lead knows how to handle). Do
   NOT retry with different arguments and do NOT assemble anything by hand.

2. **Apply the published-version modifications** (skip if the list below
   says none). These are user-confirmed edits that belong ONLY in the
   published snapshot -- the live mind keeps its own versions, and nothing
   you do here touches it:

   <one line per modification: file + the change to make, e.g.
   "libs/slack_zen_garden/config.py: replace the hardcoded '#team-garden'
   channel with a neutral default the adopter sets" -- or the single line
   "None requested.">

   After applying them, re-run the secret token scan over every file you
   modified (the same pattern the assembly script enforces); it must print
   nothing:

   ```bash
   grep -nIE -- 'ghp_[A-Za-z0-9]{36}|gho_[A-Za-z0-9]{36}|github_pat_[A-Za-z0-9_]{22,}|sk-ant-[A-Za-z0-9_-]{24,}|AKIA[0-9A-Z]{16}|-----BEGIN [A-Z ]*PRIVATE KEY-----' <each modified file>
   ```

   A hit means a modification did not fully remove a credential -- fix it or
   report `stuck`; never leave it in.

3. **Flesh out the manifest.** `inspiration-<slug>.md` at the repo root has
   `<!-- FILL-IN (publishing agent): ... -->` comment blocks in "What it is,"
   "How it works," "Prerequisites," and "Holes" -- generated placeholders,
   not real content. Replace EVERY block with real, specific content.
   "Prerequisites" is the strictest: one machine-readable line per activation
   requirement in the exact `requires_permission:` / `requires_secret:` forms
   the template shows, derived from the included code (inspect every service
   the app reaches through `latchkey curl` and name the real latchkey scope
   and permission schema, e.g. `slack-api / slack-read-all`). These lines are
   what the ADOPTING agent acts on during setup -- it initiates each one via
   a latchkey permission request before asking how to adapt -- so a vague or
   missing line silently breaks adoption (a real incident: an adopter never
   prompted for a Slack permission the app needed). "Holes" is the
   adaptation agenda only -- design gaps, stubbed integrations, hardcoded
   accounts -- never activation requirements. If a section genuinely has
   nothing to add, say so explicitly in prose; never leave a placeholder
   comment in place and never leave a section blank.

4. **Design the thumbnail.** `inspiration-<slug>.svg` at the repo root is a
   generic placeholder the script generated -- it must never be published.
   Replace its entire contents with a bespoke SVG you design for THIS app: a
   clean, simple, iconic representation of what the app actually is and shows
   (derive it from the app code and the manifest you just wrote -- e.g. a
   stylized miniature of its main screen or its core object). Hard rules:
   mock data only, never real user data; no `<script>`; no `on*=` event
   attributes; no `<foreignObject>`; no external references (no href/src
   pointing outside the file) -- fully self-contained. Keep the root
   `viewBox` around 240x160.

5. **Commit** the modification + manifest + thumbnail edits as a follow-up
   commit on your branch (`mngr/<slug>`), in your worktree.

6. **Self-check, then report.** Both greps must print NOTHING before you may
   report `done`:

   ```bash
   grep -n -- '<!-- FILL-IN (publishing agent)' inspiration-<slug>.md
   grep -nEi -- 'minds-placeholder-thumbnail|<script|<foreignObject|on[a-z]+[[:space:]]*=' inspiration-<slug>.svg
   ```

   If either prints anything, fix and re-commit; do not report done until
   both are clean and `git status` is clean.

## Context

- Your worktree is a fresh checkout on branch `mngr/<slug>`. The script
  resets it to the clean template base `<BASE_REF>` and overlays only the
  selected paths, so the final tree looks nothing like the live mind's HEAD
  -- that is correct and expected. Do not "restore" anything it removes.
- Included paths and what each one is:
  <one line per include path: what it is and its role>
- <extra context the lead has: what the app does for its user, known holes,
  tokens/accounts it depends on -- everything the worker needs to write a
  good manifest and a representative thumbnail>

## Success criteria

- `build_inspiration.sh` exited 0 and its commit is on `mngr/<slug>`.
- Every published-version modification applied, its files re-scanned clean.
- Every FILL-IN block replaced with real prose (or an explicit "none").
- `inspiration-<slug>.svg` is a bespoke design for this app; the placeholder
  marker is gone and the safety grep is clean.
- Follow-up edits committed on `mngr/<slug>`; `git status` clean.

## Reporting back

Follow `.agents/shared/references/worker-reporting.md` for the full report
procedure. Substitutions for this task:

- `<TASK_FILE_GLOB>` -> `runtime/launch-task/*/task.md`
- `<RUNTIME_REPORTS_DIR>` -> `runtime/launch-task/<slug>/reports/` (recreate
  it with `mkdir -p` -- the assembly script deleted `runtime/`)
- Valid `name:` values: `question` (mid-flight gate), `done` / `stuck`
  (terminal).

In a `done` report body, include your worktree's absolute path (from
`git rev-parse --show-toplevel`) and the branch `mngr/<slug>` -- the lead
publishes directly from that worktree. In a `stuck` report, quote the
assembly script's stderr verbatim.
BODY_EOF
} > runtime/launch-task/<slug>/task.md

Launch (foreground, so a failed launch surfaces immediately):

uv run .agents/skills/launch-task/scripts/create_worker.py launch \
    --name <slug> \
    --template worker \
    --runtime-dir runtime/launch-task/<slug>/ \
    --task-file runtime/launch-task/<slug>/task.md

Background-await the report (Bash run_in_background: true -- never block on it), then continue with whatever else you were doing:

# Run with Bash run_in_background: true
uv run .agents/skills/launch-task/scripts/create_worker.py await \
    --task-file runtime/launch-task/<slug>/task.md

Handle the report per .agents/shared/references/lead-proxy.md (proxy or answer any question gate, consume reports into consumed/, diagnose liveness on a timeout) -- with one critical override:

• name: stuck -> the assembly script refused for one of §5's reasons. Surface the quoted stderr to the user plainly and stop (or fix the input -- e.g. re-resolve BASE_REF per §2 -- and relaunch). Do not publish anything.

• name: done -> do NOT merge mngr/<slug> (that is lead-proxy.md's default done handling, and it is exactly the merge the CWD-INVARIANT callout forbids -- the assembled tree diffs against /code as mass deletions). Instead, resolve $WT:

  WT="$(git worktree list --porcelain | awk -v b='refs/heads/mngr/<slug>' '$1 == "worktree" { wt = $2 } $1 == "branch" && $2 == b { print wt }')"
  

  Cross-check it against the worktree path in the report body (worktrees live under /mngr/worktree/<slug>-<uuid>/), then verify the worker's gates yourself -- both greps must print nothing and git -C "$WT" status must be clean:

  grep -n -- '<!-- FILL-IN (publishing agent)' "$WT/inspiration-<slug>.md"
  grep -nEi -- 'minds-placeholder-thumbnail|<script|<foreignObject|on[a-z]+[[:space:]]*=' "$WT/inspiration-<slug>.svg"
  

  If either grep hits, message the worker to finish the job (per lead-proxy.md's gate mechanics) rather than finishing it yourself. Once clean, close the delegation step and proceed to §6 (chat confirmation), §7 (GitHub auth), and §8 (create repo + push), ALL running with cwd = $WT (see the callout above).

Leave the worker itself alone until §10 -- destroying it removes $WT, which you still need for the push.

4. What the assembly does

build_inspiration.sh (documented below) does the whole mechanical assembly in the worker's worktree: clean base + overlay + secret scan + manifest + placeholder thumbnail + an inspiration-specific /welcome written into the snapshot + boot smoke-check + a single commit. It communicates purely via its exit code -- 0 on success (the assembled commit is on mngr/<slug>), non-zero otherwise (see §5). It prints a summary of what it assembled to stderr. The worker then supplies the two things the script cannot: the manifest prose and the bespoke thumbnail.

5. Guard rails (the script's non-zero exits)

The worker maps any non-zero exit to a stuck report quoting the script's stderr. What each exit means, and what you do:

• Secret scan (exit 1). A credential/token rode in on an overlaid path. Nothing was committed; surface the flagged path (value redacted) and stop.
• No-diff guard (exit 3). The resolved include set contributes nothing beyond BASE_REF (the assembled tree equals the base tree). Tell the user plainly and do NOT create a repo -- there are no empty inspiration repos.
• Boot smoke-check (exit 4). The clean base does not boot at all; abort BEFORE any repo creation. Selected apps having holes is expected and does NOT fail the check.
• Non-template base (exit 5). The --base-ref does not resolve to a tree in the repo, or its tree is not a bootable template: it lacks pyproject.toml and/or supervisord.conf (e.g. a parallel subtree root was picked instead of the real seed). Nothing was committed; re-resolve BASE_REF per §2 (its pre-check should have caught this before launch) and relaunch.

Every one of these is a "fix the input and relaunch the worker" situation, never a "publish something smaller instead" situation -- see the "MUST BE BOOTABLE" callout at the top of this skill.

6. Confirm the publish in chat

cwd = $WT for this and every remaining section. The manifest/thumbnail files referenced below (inspiration-<slug>.md / .svg) live at $WT's repo root, not /code's.

Confirmation happens inline in chat -- there is no other confirmation mechanism. Present the proposal to the user ONCE, in plain language:

• the title and description;

• the repo name (defaults to slug);

• the visibility (default: private);

• a short recap of the published-version modifications that were applied (or that there were none), so the user can verify their requested removals and changes actually happened;

• the thumbnail the sub-agent designed -- EMBED it in the chat message as a markdown image so the user actually sees what will represent their inspiration, using the file's absolute path:

  ![<title> thumbnail]($WT/inspiration-<slug>.svg)
  

  (substitute the real absolute worktree path), and note you can adjust it if they'd like.

Then END YOUR TURN and WAIT. This is a hard gate, exactly like §1's: §8 (create the repo + push) may only run after an explicit go-ahead in the user's reply TO THIS MESSAGE. No earlier approval counts -- not the §1 scope confirmation, not a "go ahead and publish" given before assembly, not approving the GitHub permission requests in the minds app. The final title, description, and thumbnail only came into existence during assembly, so the user cannot have approved them yet. Your own gate checks (the FILL-IN / placeholder / safety greps, generalization spot-checks) are VERIFICATION, not confirmation -- they never substitute for the user's reply. (A real publish run verified everything itself, announced "everything checks out," and pushed in the same turn -- the user never saw the thumbnail or final details before the repo existed on their account. This gate exists to prevent exactly that.)

Take edits in their replies and apply them; once their reply is an explicit go-ahead, proceed with the agreed values. Do not re-ask what they already answered in §1; this is a confirm-and-adjust pass, not a second interview. If the user asks to abort, stop here and leave the assembled commit intact (§10's failure path).

• Validate an edited repo name against ^[A-Za-z0-9._-]+$ (no leading -) before using it.
• If the user asks for thumbnail changes, YOU edit $WT/inspiration-<slug>.svg, keeping the same safety rules the worker followed: mock data only, no <script>, no on*= attributes, no <foreignObject>, no external references. If the user pastes raw SVG markup in chat, never write it into the file verbatim -- apply the same rules first (strip anything that violates them, and tell the user what you stripped).

Commit before §8's push. Write any confirmed title/description edits into inspiration-<slug>.md's front-matter (and any thumbnail edits into the .svg), and COMMIT that change with cwd = $WT before proceeding to §7/§8. Never push first and fix up the manifest or thumbnail with a second commit-and-re-push. This commit -- like everything else in this skill after assembly -- happens IN $WT, never /code.

7. Ensure GitHub access (latchkey -- do NOT use the gh CLI)

GitHub access goes through latchkey's github permissioning, exactly like every other connector in this template (see the latchkey skill). Do NOT use the gh CLI anywhere in this flow -- no gh auth, no gh repo -- and do not run browser/device login flows. Latchkey keeps the credential outside the container and injects it per-request; the user approves once in the minds app.

The flow needs TWO github scopes, both approved once by the user in minds:

• github-rest-api (github-read-user + github-write-all) -- the API calls in §8: repo creation and the topic. The names matter: repo creation is POST /user/repos, whose path the narrower github-write-repos permission does NOT match (its schema covers /repos/... paths only), and the /user probe needs github-read-user. Requesting narrower names produces a grant that 403s the flow's own calls even after the user approves.
• github-git (github-git-write) -- the git push itself. The gateway natively proxies GitHub's git smart-HTTP endpoints (a push is just a GET info/refs?service=git-receive-pack + a POST git-receive-pack), so the push goes through latchkey too; no token ever enters this container.

Probe both up front:

# API access. The -f matters: latchkey curl exits with curl's own code, and
# the gateway rejects unpermitted requests with an HTTP 403 (a completed
# exchange, so exit 0 without -f); -f turns a denial into exit 22:
latchkey curl -sf https://api.github.com/user
# Push access -- a github-git (or catch-all) rule granting github-git-write
# (or "any") must exist; grants can take either form, so check both:
latchkey curl http://latchkey-self.invalid/permissions/self \
    | jq -e '[.rules[]? | to_entries[] | select(.key == "github-git" or .key == "any") | select(any(.value[]?; . == "github-git-write" or . == "any"))] | length > 0' >/dev/null \
    && echo "git push: permitted" || echo "git push: NOT permitted"

For whichever is missing, initiate the permission request YOURSELF (each request opens the approval/login flow in the minds app; the body must be exactly the four fields shown -- agent_id, type, payload, rationale):

latchkey curl -XPOST http://latchkey-self.invalid/permission-requests \
    -H 'Content-Type: application/json' \
    -d '{"agent_id": "'"$MNGR_AGENT_ID"'", "type": "predefined", "payload": {"scope": "github-rest-api", "permissions": ["github-read-user", "github-write-all"]}, "rationale": "Publish this inspiration as a new GitHub repo on your account."}'
latchkey curl -XPOST http://latchkey-self.invalid/permission-requests \
    -H 'Content-Type: application/json' \
    -d '{"agent_id": "'"$MNGR_AGENT_ID"'", "type": "predefined", "payload": {"scope": "github-git", "permissions": ["github-git-write"]}, "rationale": "Push the published inspiration'"'"'s git history to the new repo."}'

Tell the user in chat that a GitHub approval is waiting for them in minds, then poll the probes as a background task, bounded (mirror launch-task's background-await pattern; a foreground while loop can be killed by your own tool-execution timeout):

# Run with Bash run_in_background: true -- bounded (~5 minutes), one wait, no re-arm thrash
for _ in $(seq 1 30); do
    if latchkey curl -sf https://api.github.com/user >/dev/null 2>&1 \
        && latchkey curl http://latchkey-self.invalid/permissions/self \
           | jq -e '[.rules[]? | to_entries[] | select(.key == "github-git" or .key == "any") | select(any(.value[]?; . == "github-git-write" or . == "any"))] | length > 0' >/dev/null; then
        echo "github access: permitted (api + git push)"
        exit 0
    fi
    sleep 10
done
echo "github access: still not permitted" >&2
exit 1

If the user never approves, surface a clear message and stop, leaving the assembled commit intact. Do NOT fall back to any other credential or mechanism (no GH_TOKEN-in-URL pushes, no partial-tree API uploads -- see the "MUST BE BOOTABLE" callout).

8. Create the repo and push

cwd = $WT. This is the step that actually publishes -- it MUST run from the worker's worktree so the push sends $WT's assembled branch (the clean snapshot), never anything from /code.

With repo_name / visibility taken from the chat confirmation:

• Pre-push checklist:

  • (cd "$WT" && git status) must be clean -- the confirmed thumbnail/manifest edits from §6 are already committed in $WT, nothing uncommitted remains. If anything is dirty, commit it first (in $WT); never push and then fix up with a re-push.

  • Placeholder-thumbnail gate -- this grep must print NOTHING:

    grep -nEi -- 'minds-placeholder-thumbnail|<script|<foreignObject|on[a-z]+[[:space:]]*=' "$WT/inspiration-<slug>.svg"
    

    A minds-placeholder-thumbnail hit means the script's placeholder is still in place (the bespoke thumbnail never landed); the other patterns are the SVG safety rules. On ANY hit, block the push, fix the file (a real bespoke SVG, rules applied), commit in $WT, and re-run the gate.

Publish in TWO steps -- create the repo via the GitHub API through latchkey, then push the assembled branch with git. (Historical note: this flow once used gh repo create --source=., which both violates the no-gh rule and breaks inside git worktrees, whose .git is a file.)

Step 1 -- create the repo (latchkey, sets name + description + visibility in one call):

latchkey curl -X POST https://api.github.com/user/repos \
    -H 'Content-Type: application/json' \
    -d '{"name": "<repo_name>", "description": "<description>", "private": <true|false>}'

Take <owner> from the response's .owner.login. "private" is true for the default private visibility, false only if the user chose public. You already validated repo_name against ^[A-Za-z0-9._-]+$ in §6; keep the JSON built from variables, never string-interpolated shell.

Step 2 -- mint ONE snapshot commit and push it as main (git through the latchkey gateway):

The published history must be the public template's history plus EXACTLY ONE snapshot commit. The worker's branch accumulates intermediate commits (the raw assembly, then the modification/manifest/thumbnail follow-ups, then any §6 edits) -- pushing the branch would publish every intermediate state, and a published-version modification would leak the very thing it removed (a real publish leaked a personal email exactly this way: it was generalized in a follow-up commit, so the pre-cleanup assembly commit shipped too). So mint a fresh commit from the FINAL tree, parented directly on BASE_REF, and push that commit -- the branch itself is never pushed:

( cd "$WT" \
    && SNAPSHOT_COMMIT="$(git commit-tree 'HEAD^{tree}' -p <BASE_REF> -m "inspiration: <slug>

Assembled on clean FCT base <BASE_REF> (provenance link only; no upstream fetch).")" \
    && git \
    -c "http.extraHeader=X-Latchkey-Gateway-Password: $LATCHKEY_GATEWAY_PASSWORD" \
    -c "http.extraHeader=X-Latchkey-Gateway-Permissions-Override: $LATCHKEY_GATEWAY_PERMISSIONS_OVERRIDE" \
    push "$LATCHKEY_GATEWAY/gateway/https://github.com/<owner>/<repo_name>.git" "${SNAPSHOT_COMMIT}:refs/heads/main" )

Pushing <sha>:refs/heads/main publishes only that one commit plus the base history it is parented on, so the published tree is exactly $WT's final state and NO intermediate assembly state exists anywhere off this machine. The gateway proxies git's smart-HTTP endpoints and injects the GitHub credential server-side (gated by the github-git-write permission from §7); the two extra headers are the gateway's own auth material, already in this container's environment. The mind's own commit history never leaves the machine either (build_inspiration.sh parents the assembly commit on BASE_REF; the minted commit here is parented there directly). No GitHub token appears anywhere -- not in the URL, not on disk -- and nothing is written into git config or a named remote (the -c options apply to this one command only; nothing to clean up afterward).

Step 3 -- tag the repo (immediately after a successful push). Every published inspiration carries the minds-inspiration GitHub topic -- a repo topic, NOT part of the description -- so inspirations are discoverable as a group (topic search / GitHub's topic page):

latchkey curl -X PUT "https://api.github.com/repos/<owner>/<repo_name>/topics" \
    -H 'Content-Type: application/json' \
    -d '{"names": ["minds-inspiration"]}'

(GitHub topic rules: lowercase letters, digits, and hyphens only -- the fixed literal minds-inspiration already conforms; do not prefix it with #. If this call fails, the publish itself already succeeded -- retry once, and if it still fails, report it as a minor follow-up rather than treating the publish as failed.)

Failure handling. If the create fails, read the response body: a "request not permitted by the user" error means the github-rest-api grant is missing or too narrow -- go back to §7; a name-taken error means asking in chat for a new name and retrying step 1. If the push fails, diagnose before retrying step 2 -- do NOT re-create the repo:

• "request not permitted by the user" means the github-git-write permission is missing -- go back to §7.
• A request-body-too-large rejection (HTTP 413) means the user's minds app is older than the gateway's raised body cap and cannot proxy a push this size; report that plainly and stop.
• A rejection mentioning workflow scope means the stored GitHub credential cannot push .github/workflows/ files (the template ships them); report it and stop rather than stripping files.

Keep the assembled commit intact in $WT throughout. For fixable causes, fix and retry the failed step until it succeeds or the user aborts; for the stop-and-report cases above, stop. Never fall back to publishing a different, non-bootable thing (e.g. uploading just the selected app files through the API instead of pushing $WT's full assembled tree) -- see the "MUST BE BOOTABLE" callout at the top of this skill. If you cannot get the documented flow to succeed, stop and report the blocker; do not improvise a substitute publish.

9. Accumulation

Publishing a mind that already holds inspiration-*.md manifests plus their app dirs carries ALL of them forward into the new repo alongside the newly-published one -- they are part of the assembled tree. The generated /welcome targets only the newly-published slug (the latest).

10. Close out

On a successful push, clean up per launch-task's conventions: the worker can be destroyed now (destroying it removes its worktree, i.e. $WT), and the local branch can go too -- the published snapshot commit was minted from the branch's final tree and lives on the new remote (the branch's intermediate commits were never pushed, by design):

uv run .agents/skills/launch-task/scripts/create_worker.py destroy --name <slug>
git worktree prune
git branch -D "mngr/<slug>"

(No git remote cleanup is needed: §8 pushes to an explicit URL and never adds a named remote.)

If the push failed and you are stopping (user aborted, unrecoverable error), leave the worker, $WT, and the mngr/<slug> branch intact instead -- do not delete work the user may want to retry or reassemble from.

Close the delegation step with a work-summary line. Report the new repo URL in your final assistant message to the user (not in the step summary).

The assembly script: scripts/build_inspiration.sh

The worker runs scripts/build_inspiration.sh from its worktree root (§3). It is self-contained (the dev create-new-mind-repo recipe is NOT available in the VM). Interface (cwd = worktree repo root):

.agents/skills/publish-inspiration/scripts/build_inspiration.sh \
  --base-ref <BASE_REF> \          # FCT commit the mind was based on (provenance + clean base)
  --slug <slug> \
  --title <title> \
  --include <path> [--include <path> ...] \   # repo-root-relative app/feature paths to overlay
  [--data-include <path> ...] \    # only when the user opted in; default none
  [--description <text>]

What it does, in order (see the script for the exact commands):

1. Validates that the --base-ref tree names pyproject.toml and supervisord.conf (a bootable template base); exits 5 with a clear message otherwise, before touching the worktree (see §5).
2. Stages the selected paths out of the worker's checkout into a scratch dir (preserving relative paths) BEFORE resetting.
3. Resets the worktree to the clean base with git read-tree -u --reset <BASE_REF> then git clean -fdxq -- this drops tracked-but-not-in-base files AND gitignored cruft (secrets, runtime state, including the worker's runtime/ task file). It never git checkout <ref> -- . (that leaks the mind's whole committed tree) and never fetches/pulls upstream.
4. Overlays the staged paths onto the clean base with rsync -a "$STAGE/" "$REPO/" (root-to-root contents merge) -- never a nesting copy like cp -a "$STAGE/apps" "$REPO/apps".
5. Carries forward any existing accumulated inspiration-*.md + .svg at the repo root.
6. Runs a deterministic secret scan that HARD-FAILS (non-zero, abort before any commit/push) on token patterns and credential filenames. This is the authoritative blocker, not LLM prose.
7. Generates the manifest inspiration-<slug>.md at the repo root (with the FILL-IN blocks the worker must replace).
8. Generates a placeholder thumbnail inspiration-<slug>.svg carrying a distinctive minds-placeholder-thumbnail marker comment; the worker MUST replace the whole file with a bespoke SVG before reporting done, and the marker makes §8's pre-push gate a deterministic grep.
9. Overwrites the snapshot's welcome/SKILL.md with a generated inspiration-specific welcome describing the newly-published inspiration.
10. Validates supervisord.conf WITHOUT starting the daemon (never supervisord -t), then makes a single commit for the assembled snapshot.