mflux-model-tiny-test

name	mflux-model-tiny-test
description	Write a hermetic "tiny" model-saving test for an mflux model — a fast twin of the slow save/load test that runs the real ModelSaver/WeightLoader/WeightApplier seam on real component classes at toy dimensions, with no downloads or image generation. Use when asked to "make tiny test for <model>".

mflux tiny model-saving test

A tiny test proves a model's quantized checkpoint survives a save/load roundtrip byte-for-byte, in about a second, without downloading anything. It builds the model's real component classes at toy dimensions and pushes them through the real save/load code path.

When to Use

• You're asked to "make tiny test for <model>" or add a fast twin of a slow save/load test.
• You ported a new model (see mflux-model-porting) and want cheap checkpoint coverage.

Related: mflux-testing for running the suite and golden-image rules.

Reference implementations

Read these before writing a new one — they are the source of truth:

• tests/model_saving/tiny_checkpoint_helper.py — the shared harness
• tests/model_saving/test_tiny_model_saving_ernie_image.py — components take explicit kwargs
• tests/model_saving/test_tiny_model_saving_ideogram4.py — components take a Config dataclass

Do not trust code quoted in this skill over those files. The pattern landed as an RFC (PR #599, "proposal + demo on 2 models") and is expected to evolve.

Models that already have tiny tests: ernie_image, ideogram4.

What you write

One file, no src/ changes:

tests/model_saving/test_tiny_model_saving_<model>.py

The whole test is a single call into TinyCheckpointRoundtrip. The real work is figuring out how to build that model's components small. Match the two examples exactly:

• class TestTiny<Model>ModelSaving
• method test_tiny_quantized_checkpoint_roundtrips_exactly, decorated @pytest.mark.fast
• a @staticmethod _tiny_components() returning the component dict
• a comment naming the slow twin it mirrors

Instructions

1. Read the weight definition — it is the contract

src/mflux/models/<model>/weights/<model>_weight_definition.py

get_components() is authoritative: it gives the exact set of component names you must produce, and how many. While there, note two things:

• quantization_group_size — a class attribute on the weight definition. Defaults to 64 but is not always 64 (boogu uses 32). Every tiny dimension must be a multiple of this model's value. Check with grep -n "quantization_group_size" src/mflux/models/<model>/weights/*.py.
• skip_quantization=True on any component (krea2 and qwen each have one). In production, WeightApplier._quantize honors this flag and leaves the component unquantized. TinyCheckpointRoundtrip._quantize does not — it calls nn.quantize on every saved component regardless of the flag, so a skip_quantization component comes out of the "saved" side quantized (with scales/biases) while the reloaded "fresh" side stays unquantized (no scales/biases). The helper's exact key-set comparison (saved_weights.keys() == fresh_weights.keys()) will then fail for that component. This is a real gap in tiny_checkpoint_helper.py, not a quirk to work around in the test file — if you're writing a tiny test for krea2, qwen, or any other model with a skip_quantization component, stop and fix TinyCheckpointRoundtrip._quantize to skip those components (mirroring WeightApplier._quantize) rather than special-casing it in the test.

2. Find each component's real class and read its __init__

Derive the shrink knobs from the actual constructor. Do not pattern-match one example — they differ deliberately: ERNIE's components take explicit kwargs (hidden_size=, num_layers=), Ideogram 4's transformer takes an Ideogram4Config dataclass.

Look under src/mflux/models/<model>/model/. Shrink layer counts to 2, hidden and intermediate sizes to 128, head counts to 2, vocab to 128.

3. Use TinyVAEStandIn for the VAE

The real VAEs are fixed-size (~170M param) architectures with no dimension knobs, so they cannot be shrunk. ModelSaver/WeightLoader treat every component as an opaque parameter tree, so the stand-in walks the identical code path. Don't spend a loop trying to shrink a real VAE.

4. Respect interlocking dimension constraints

Dimensions are not independent. Look for constraints in the component's __init__ and attention/rope code:

• rope_axes_dim must sum to head_dim (ERNIE: [16, 24, 24] → 64)
• head_dim must be consistent with hidden_size / num_attention_heads
• num_key_value_heads must divide num_attention_heads

5. Choose tensors_per_shard

Start with tensors_per_shard=8. It forces shard boundaries so the index.json / weight_map multi-shard paths get exercised — the production size-based split (≥1 GB) never shards test-sized tensors.

The helper asserts len(shard_files) > component_count. If a model's tiny components have too few parameter tensors to clear that bar, lower the number until it passes — do not drop the argument, that silently removes multi-shard coverage.

6. Name the slow twin — after checking it exists

The examples carry Fast twin of tests/model_saving/test_model_saving_<model>.py. Several models have weight definitions but no slow save test. Verify with ls tests/model_saving/ and adapt the comment rather than pointing at a file that isn't there.

Constraints that will bite you

• Key the dict by component.name, not model_attr. The helper does a bare components[component.name] lookup, so a missing or misnamed key is a raw KeyError, not a helpful message. Most common first-try failure. Every component in get_components() needs an entry.
• Do not collapse the two seeds. The harness randomizes saved components with seed=0 and fresh ones with seed=1. That difference is exactly what makes the final equality assertion prove values came off disk. Unifying them leaves the test green and meaningless.
• Do not edit WeightDefinitionType. The helper types weight_definition as plain type on purpose — that TYPE_CHECKING union has drifted and omits several definitions. Widening a src type alias is out of scope; see the helper's comment.
• Do not modify src/. A tiny test is a test-only addition. If a model appears to genuinely require a src change to be testable, stop and report that rather than making it.

Verify

uv run --no-sync python -m pytest tests/model_saving/test_tiny_model_saving_<model>.py -v

Then confirm nothing else broke with just test-fast (see mflux-testing).

The test should run in roughly a second. If it takes noticeably longer, or the network is touched, something is loading a real checkpoint — investigate rather than accepting it.

Do you need to check that quantization actually happened?

No. Verified empirically: MLX raises loudly on a bad dimension rather than silently skipping —

ValueError: [quantize] The last dimension of the matrix needs to be divisible
by the quantization group size 64. However the provided matrix has shape (100,100)

so a dimension that isn't a clean multiple of the group size fails the test outright. It cannot leave a green-but-weak twin.

Relatedly, when inspecting a quantized tree you'll see some .weight entries with no matching .scales. Confirmed benign: those are 1-D norm weights and Conv2d layers, which nn.quantize correctly leaves alone. Only Linear-style layers quantize. Don't chase these.

Troubleshooting

Symptom	Cause
KeyError: '<name>'	_tiny_components() is missing a component, or keyed it by model_attr instead of name
ValueError: [quantize] ... divisible by the quantization group size	A dimension isn't a multiple of this model's quantization_group_size
assert len(shard_files) > component_count	Lower tensors_per_shard (step 5)
Values differ after reload	A real save/load bug — report it, do not weaken the assertion
Shape assertion inside a component's __init__/forward	An interlocking dimension constraint (step 4)