project-data

name	project-data
description	Use this skill when reading from or writing to the project intelligence data store. Manages a multi-file data store (project-config.json, plans-spatial.json, specs-quality.json, schedule.json, directory.json, individual log files, and daily-report-data.json). Handles storage, cross-referencing, versioning, validation, and smart retrieval of project intelligence, report history, RFI/submittal logs, procurement tracking, vendor database, and lookahead schedules.
version	2.0.0

Project Data Management

Overview

The data backbone for Foreman_OS. This skill owns the project intelligence store, the report history log, and all operational data. Every other skill reads from and writes to the data layer through the patterns defined here.

Data Files

All JSON files are stored in folder_mapping.ai_output (typically AI - Project Brain/). If folder_mapping is not yet set up, fall back to the user's working directory root.

IMPORTANT — File Location Rule: When searching for these files, always check AI - Project Brain/ first, then fall back to the project root. When saving, always save to folder_mapping.ai_output if available.

File Structure

File	Purpose	Key Contents
project-config.json	Master config — project identity, folder paths, document tracking, change history	project_basics, report_tracking, folder_mapping, documents_loaded, version_history, asi_log
plans-spatial.json	Everything derived from plan sheets — spatial layout, quantities, drawing cross-references	grid_lines, building_areas, floor_levels, room_schedule, site_layout, sheet_cross_references, quantities, site_utilities
specs-quality.json	Everything from specs and quality documents — requirements, thresholds, testing, safety	spec_sections, key_materials, weather_thresholds, hold_points, tolerances, contract, safety, swppp, geotechnical, mix_designs
schedule.json	Schedule data and lookahead history	milestones, critical_path, near_critical, weather_sensitive_activities, long_lead_items, material_requirements_by_activity, lookahead_history
directory.json	People and companies	subcontractors, subcontractor_assignments, vendor_database, owner_reports
rfi-log.json	RFI tracking	rfi_log array
submittal-log.json	Submittal tracking	submittal_log array
procurement-log.json	Material procurement tracking (includes cert tracking)	procurement_log array
change-order-log.json	Change order tracking	change_order_log array
inspection-log.json	Inspection and permit tracking	inspection_log array, permit_log array
meeting-log.json	Meeting minutes and action items	meeting_log array
punch-list.json	Punch list items	punch_list array
pay-app-log.json	Pay application tracking	pay_applications array, lien_waivers, retainage tracking, schedule_of_values
delay-log.json	Delay event tracking	delay_events array, weather_delays, owner_delays, claims documentation
labor-tracking.json	Labor hours and crew productivity	labor_entries array, crew_summaries, productivity_ratios, classifications
quality-data.json	Quality inspections and deficiency tracking	inspections array, deficiencies, corrective_actions, quality_metrics
safety-log.json	Safety incidents, OSHA records, toolbox talks, corrective actions	incidents array, osha_300_log, toolbox_talks, corrective_actions
cost-data.json	Budget structure, cost tracking, variance analysis, cash flow	budget_by_division array, contingency, earned_value, forecast
daily-report-data.json	Report history — the running record that feeds dashboard and weekly reports	Structured data from every generated daily report
daily-report-intake.json	Running intake log for the current day	Intake entries from /log sessions
visual-context.json	Site context for AI rendering generation	site_photos, design_intent, material_selections
rendering-log.json	Generated rendering history and prompt records	renderings array
drawing-log.json	Drawing revision control, ASI tracking, current set status	drawings array, asi_log, distribution_log
closeout-data.json	Closeout tracking, commissioning status, warranty management	closeout_items, commissioning_status, warranty_items
risk-register.json	Risk entries with probability/impact scoring and mitigation plans	risks array, mitigation_plans, contingency_tracking
claims-log.json	Claims documentation, notice records, evidence tracking	claims array, notice_records, evidence_items
environmental-log.json	LEED credits, SWPPP compliance, waste diversion, hazmat	leed_credits, swppp, waste_diversion, hazmat
annotation-log.json	Document annotations, markup history, distribution tracking	annotations array, distribution_log

File Lookup Table

When a skill or command needs specific data, use this table to know which file to read:

You need...	Read from
Project name, address, team, logo	project-config.json → project_basics
Report numbering	project-config.json → report_tracking
Where to save files	project-config.json → folder_mapping
What documents have been processed	project-config.json → documents_loaded
Change history for any data	project-config.json → version_history
Architect's Supplemental Instructions (ASIs)	project-config.json → asi_log
Grid lines, building areas, floor levels	plans-spatial.json
Room schedule, site layout	plans-spatial.json
Drawing index, detail callouts, assembly chains	plans-spatial.json → sheet_cross_references
Quantities (rooms, walls, concrete, flooring, piping, counts, PEMB)	plans-spatial.json → quantities
Site utilities (storm, sanitary, water, fire, gas, telecom)	plans-spatial.json → site_utilities
Spec sections, CSI requirements	specs-quality.json → spec_sections
Key materials, testing requirements	specs-quality.json → key_materials
Weather thresholds (temp/wind limits)	specs-quality.json → weather_thresholds
Hold points, witness points, tolerances	specs-quality.json
Concrete mix designs	specs-quality.json → mix_designs
Contract dates, LDs, working hours	specs-quality.json → contract
Safety zones, SWPPP, geotechnical	specs-quality.json
Schedule milestones, critical path	schedule.json
Long-lead items, weather-sensitive activities	schedule.json
Lookahead history	schedule.json → lookahead_history
Subcontractor directory	directory.json → subcontractors
Vendor database	directory.json → vendor_database
Weekly owner report archive	directory.json → owner_reports
RFI entries	rfi-log.json
Submittal entries	submittal-log.json
Procurement / material tracking	procurement-log.json
Change orders	change-order-log.json
Inspections and permits	inspection-log.json
Meeting minutes and action items	meeting-log.json
Punch list items	punch-list.json
Pay application data	pay-app-log.json
SOV / schedule of values	pay-app-log.json → schedule_of_values
Lien waivers	pay-app-log.json → lien_waivers
Delay events	delay-log.json → delay_events
Weather days / contract extensions	delay-log.json → weather_delays, delay_events
Labor hours, crew counts, overtime	labor-tracking.json → labor_entries
Crew productivity ratios	labor-tracking.json → productivity_ratios
Worker classifications (Davis-Bacon)	labor-tracking.json → classifications
Quality inspection results	quality-data.json → inspections
Quality deficiencies / corrective actions	quality-data.json → deficiencies, corrective_actions
Concurrent delays	delay-log.json → concurrent_delays
Past daily reports	daily-report-data.json

Project Intelligence Schema

See references/json-schema-reference.md for the full schema with producer/consumer mapping. Also see references/data-flow-map.md for pipeline architecture and references/cross-reference-patterns.md for reusable cross-referencing patterns. Quick reference:

project-config.json
  ├── project_basics       → Header info, auto-fills every report
  ├── report_tracking      → Last report number, sequential numbering
  ├── folder_mapping       → Where to save each output type
  ├── documents_loaded     → Extraction history with dates and coverage
  ├── version_history      → Change log for key data points
  └── asi_log              → Architect's Supplemental Instructions tracking

plans-spatial.json
  ├── grid_lines           → Column/row identifiers, spacing, orientation notes
  ├── building_areas       → Named zones with grid references and floor ranges
  ├── floor_levels         → Level names, elevations, descriptions
  ├── room_schedule        → Room numbers, names, locations
  ├── site_layout          → North arrow, access points, laydown, trailers
  ├── sheet_cross_references → Drawing index, detail callouts, assembly chains
  ├── quantities           → Measured quantities (rooms, walls, concrete, flooring, piping, counts, PEMB)
  └── site_utilities       → Storm, sanitary, water, fire, gas, telecom utility runs

specs-quality.json
  ├── spec_sections        → CSI sections with requirements and thresholds
  ├── key_materials        → Material specs with testing requirements
  ├── weather_thresholds   → Temperature/wind limits by work type
  ├── hold_points          → Inspection hold points by work type
  ├── tolerances           → Quality tolerances by material/system
  ├── contract             → Dates, LDs, hours, restrictions, documentation reqs
  ├── safety               → Fall protection zones, confined spaces, hot work areas
  ├── swppp               → BMP locations, inspection triggers, requirements
  ├── geotechnical         → Bearing capacity, water table, compaction reqs
  └── mix_designs          → Concrete mix design specifications

schedule.json
  ├── current_phase        → Active construction phase
  ├── percent_complete     → Overall project progress
  ├── milestones           → Key dates with status tracking
  ├── critical_path        → Critical path activities
  ├── near_critical        → Near-critical activities
  ├── weather_sensitive    → Activities affected by weather
  ├── long_lead_items      → Long-lead material items
  ├── material_requirements_by_activity → Activity-to-material mapping
  └── lookahead_history    → Generated lookahead schedule records

directory.json
  ├── subcontractors       → Directory with names, trades, contacts, scopes
  ├── vendor_database      → Supplier directory with capabilities and history
  └── owner_reports        → Weekly owner report archive

Individual log files (rfi-log.json, submittal-log.json, procurement-log.json,
change-order-log.json, inspection-log.json, meeting-log.json, punch-list.json,
pay-app-log.json, delay-log.json)
  ├── rfi-log.json         → RFI log array
  ├── submittal-log.json   → Submittal log array
  ├── procurement-log.json → Procurement log array
  ├── change-order-log.json → Change order log array
  ├── inspection-log.json  → Inspection/permit log array
  ├── meeting-log.json     → Meeting minutes and action items array
  ├── punch-list.json      → Punch list items array
  ├── pay-app-log.json     → Pay applications, SOV, lien waivers, retainage tracking
  └── delay-log.json       → Delay events, weather delays, concurrent delays, claims

daily-report-data.json
  └── Report history — the running record that feeds dashboard and weekly reports

Smart Retrieval

When a skill needs project data, it should only load the specific files it needs — never all 28 files at once.

Retrieval by Work Type

When the user describes work being performed, pull the relevant cross-section:

User mentions	Files to read	Retrieve
Concrete work	specs-quality.json, plans-spatial.json, schedule.json	Concrete spec sections, mix designs, testing frequency, cold/hot weather thresholds, hold points, compaction reqs if SOG
Steel erection	specs-quality.json, plans-spatial.json, schedule.json	Steel spec sections, connection types, special inspection reqs, crane locations from site layout, wind speed limits
Excavation/earthwork	specs-quality.json, plans-spatial.json	Geotechnical data, compaction requirements, utility locations, dewatering triggers, SWPPP BMPs
Roofing	specs-quality.json	Roofing spec section, weather thresholds (wind, temperature, moisture), manufacturer requirements
MEP rough-in	specs-quality.json, plans-spatial.json	Relevant M/E/P spec sections, inspection requirements, coordination notes
Framing	specs-quality.json	Structural specs, connection details, inspection hold points
Waterproofing	specs-quality.json	Waterproofing spec section, temperature requirements, surface prep tolerances

Retrieval by Location

When the user mentions a location, resolve it from plans-spatial.json:

User says	Resolve to
"east side"	Building area with "east" in name → grid lines → floor levels for that area
"second floor"	Floor level "Level 2" → rooms on that level → building areas at that level
"by the elevator"	Central core area → grid lines for core → floor level
"at Grid C"	All building areas that include Grid C → activities at that location

Retrieval by Subcontractor

When the user mentions a sub (even casually), match from directory.json:

User says	Match to
"Walker"	Walker Construction → Excavation/Sitework → scope details → schedule dates
"the electrician"	Sub with trade = "Electrical" → company name → foreman → scope
"HVAC guys"	Sub with trade containing "HVAC" or "Mechanical" → full record

Cross-Referencing

The power of the data layer is connecting related information across files. When serving data, always include cross-references:

Sub → Schedule → Spec

A subcontractor is linked to their scope, which maps to spec sections, which have testing and inspection requirements. When "Walker Construction" is on site doing excavation:

• Pull their scope from directory.json
• Pull the earthwork spec sections from specs-quality.json
• Pull compaction testing requirements from specs-quality.json
• Pull geotechnical requirements from specs-quality.json
• Check schedule from schedule.json for earthwork milestones

Location → Grid → Area → Room

A location mention cascades through spatial data in plans-spatial.json:

• "Room 205" → Room schedule → Level 2 → East Wing → Grid E-G / 3-5
• "East wing foundation" → East Wing → Grid E-G → Level 1 / Below grade → Foundation spec sections (from specs-quality.json)

Work Type → Weather Threshold → Today's Weather

When documenting work, check if today's weather affects that work:

• Concrete placement + today's temp < cold weather threshold (from specs-quality.json) → Flag in report
• Crane operations + today's wind > wind speed limit (from specs-quality.json) → Flag in report

Retrieval by Quantity

When the user asks about quantities, measurements, or progress percentages — read from plans-spatial.json:

User asks	Retrieve
"how much concrete"	quantities.concrete → total CY by element type, assembly chains with source sheets
"room areas"	quantities.rooms → all rooms with area SF, perimeter LF, source attribution
"flooring progress"	quantities.flooring → total SF by type, cross-ref with rooms completed in daily-report-data.json
"how many outlets"	quantities.counts → symbol counts with schedule comparison, discrepancy flags
"total drywall"	quantities.walls → wall SF by type, calculate GWB from wall assemblies
"which sheets for footing F1"	sheet_cross_references.assembly_chains → all linked sheets for that element

Element → Assembly Chain → Multi-Sheet Data

When a specific construction element is referenced, trace its assembly chain in plans-spatial.json:

• "Footing F1" → sheet_cross_references.assembly_chains → S2.1 (plan) + S5.1 (detail) + S1.0 (notes)
• Pull dimensions from each linked sheet, calculate volume, note concrete spec
• Include source priority (DXF exact data > visual estimate > text-parsed value)

Retrieval by RFI/Submittal

When working with RFIs or submittals, pull the full context chain across files:

Query	Files to read	Retrieve
RFI by subject/topic	rfi-log.json, specs-quality.json, plans-spatial.json	Matching RFI entries → linked drawing refs → linked spec sections → related submittals
RFI by status	rfi-log.json, schedule.json	All RFIs with status "issued" or "pending" → schedule impact
Submittal by spec section	submittal-log.json, specs-quality.json	Matching submittal entries → spec requirements → compliance matrix
Submittal by status	submittal-log.json, schedule.json	All submittals "under_review" or "revise_and_resubmit" → lead times → schedule impact
Submittal by sub	submittal-log.json, directory.json	All submittals from that sub → their scope → related spec sections
Overdue RFIs	rfi-log.json	All RFIs issued > 14 days ago with status != "resolved"
Overdue submittals	submittal-log.json	All submittals with review pending > 10 business days

Retrieval by Procurement

Read from procurement-log.json, cross-reference with other files as needed:

Query	Retrieve
Long-lead items	All procurement with category "long_lead" → expected delivery → schedule activity linked (cross-ref schedule.json)
Upcoming deliveries	All procurement with expected_delivery in next 14 days → spec requirements (cross-ref specs-quality.json) → storage location
Delayed materials	All procurement with delivery_status "delayed" → schedule impact → alternative vendors (cross-ref directory.json)
Unverified deliveries	All procurement with actual_delivery set but verified_against_spec = false
Missing certs	All procurement with certs_required but certs_received incomplete
Material by spec section	All procurement matching a spec section → supplier → delivery status

Retrieval by Pay Application

Read from pay-app-log.json, cross-reference with subcontractor and change order tracking:

Query	Retrieve
Current pay application status	Latest pay_application entry → current amount, retainage, approval status
Schedule of values	pay-app-log.json → schedule_of_values (sum by trade, by phase, total contract value)
Retainage tracking	pay-app-log.json → retainage_held, retainage_released, remaining_retainage (by contractor, by pay period)
Lien waivers pending	All lien_waivers with status "pending" → contractor name, deadline for receipt
Lien waivers received	All lien_waivers with status "received" → storage location, date received, percentage release authorized
Payment by contractor	All pay_applications entries filtered by contractor → total paid, percentage complete, retainage
Change order impact on payment	pay-app-log.json cross-ref with change-order-log.json → which COs have been incorporated into pay app
Cost variance	pay-app-log.json → contract_value vs sum(all pay applications) → budget impact trend

Retrieval by Delay Event

Read from delay-log.json, cross-reference with schedule and daily report data:

Query	Retrieve
Weather delays	All delay_events with type "weather" → date, duration, affected activities, weather thresholds exceeded
Owner delays	All delay_events with type "owner_delay" → date, reason (permit, decision, document approval), duration
Concurrent delays	All concurrent_delays entries → which delays happened at same time, impact on schedule impact calculation
Delay documentation	delay_events → daily_report_references, photos, weather data, contractor notification log
Schedule extension claims	All delay_events with claims_filed = true → claim date, contractor, damages requested, supporting documents
Recovery actions	delay_events → recovery_measures_taken, accelerated_activities, cost of acceleration
Total delay impact	Sum all approved_delay_days across all delay_events → net schedule impact vs original substantial completion date
Concurrent delay disputes	All concurrent_delays where responsibility is disputed → document contractor vs owner claims separately

Retrieval for Lookahead

When generating a look-ahead schedule, pull a composite view:

Data needed	Source file
Activities for next 3 weeks	schedule.json → milestones + critical_path + near_critical filtered by date range
Subs for each activity	directory.json → subcontractors matched by trade/scope
Materials needed	procurement-log.json → expected_delivery in lookahead window, plus long_lead items
Weather constraints	specs-quality.json → weather_thresholds matched to activity work types
Pending RFIs that block work	rfi-log.json → status != "resolved" and schedule_impact != "none"
Pending submittals that block work	submittal-log.json → status = "under_review" and schedule_impact = "critical_path_blocked"
Recent crew trends	daily-report-data.json → Last 5 daily reports → crew.subs_on_site → headcount trends

Retrieval for Weekly Owner Report

Data needed	Source file
All daily reports for the week	daily-report-data.json filtered by date range
Current schedule status	schedule.json → current_phase, percent_complete, milestones_approaching
Active delays	delay-log.json → delay_events; also daily-report-data.json → Latest report's schedule.delays
Delay summary (weather, owner, concurrent)	delay-log.json → weather_delays, concurrent_delays, claims_documentation
Open items	daily-report-data.json → Latest report's open_items
Weather summary for week	daily-report-data.json → All reports' weather sections
Inspection summary	daily-report-data.json → All reports' inspections sections
Photo highlights	daily-report-data.json → All reports' photos (select representative)
Pay application status	pay-app-log.json → Latest pay application, retainage tracking
Lien waiver status	pay-app-log.json → lien_waivers (pending vs received)
ASI status	project-config.json → asi_log (active ASIs, change order impacts)
Distribution list	specs-quality.json → contract.documentation_requirements.distribution_list

Cross-Referencing: RFI → Submittal → Procurement

These three log files are interconnected:

• An RFI (rfi-log.json) may trigger a submittal (architect clarifies, resulting in a product change)
• A submittal (submittal-log.json) approval may trigger procurement (approved product can now be ordered)
• A procurement (procurement-log.json) delay may trigger an RFI (need alternate product approval)

When serving data from any of these logs, always check for cross-references:

• RFI's related_submittals[] → pull linked entries from submittal-log.json
• Submittal's related_rfis[] → pull linked entries from rfi-log.json
• Procurement's submittal_id → pull linked submittal status from submittal-log.json (can't order until approved)

---

Extended reference: Detailed examples, templates, scoring rubrics, and best practices are in references/skill-detail.md.